What Are Collared Ferrules?!?

Подписаться 4 тыс.

Просмотров 4,9 тыс.

50% 1

Almost every club has a ferrule, but why are some built using collared ferrules and what are their purpose. This video explains why they are useful, when you should use them, and why they are also used in mass production.
Please subscribe, and use the comment section to ask any questions. Also feel free to reach out on Twitter & Instagram:
rdsbarath?lang=en
rdsbarath?...

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@icww8428 5 лет назад

#1000! Great video on the Ferrule.

@scedab 5 лет назад

great video, would you recommend installing a .355 shaft in a .370 iron head with a shim and collared ferrule?

@jerrygenex 5 лет назад

I noticed that the collared ferrule easily moves away from the hosel along the time.

@petermartinaitis8166 2 года назад

Never had a loose ferrule on any clubs I've purchased in 40 years and there have been a few.

@oaker050668 Год назад

Is there a special ferrule for Callaway Diablo Driver?

@garyyip8854 5 лет назад

Hi Ryan, another great video. Not to get to far away from the topic, but lets just say that the fit between the hosel and shaft diameter wasn't great and that you would need a shim so it wouldn't 'wobble' when you dry fitted. If you had the collared ferrule would you still need the shim? thanks again! :D

@ryanbarath1916 5 лет назад

It really depends - If the fit is snug at the bottom you might nit but if there is still quite a bit of wobble then you should certainly use a shim. When in doubt use a shim in my personal ideology.

@JimmyGunXD556 5 лет назад

Need some help. I have a Callaway X2 hot 3 wood when I pulled the shaft there is a brass pin fixed in the head. how can I remove it? Any help would be greatly appreciated thank you in a advance!

@ryanbarath1916 5 лет назад

Great Question! That PIn is actually a weight. You can heat the hosel and use needle nose pliers to remove it. Built a TON of those FW and with a bit of heat and the right pliers you can make quick work of that tip weight.

@JimmyGunXD556 5 лет назад

Thank you very much for answering!!