I put 35" toyo RT on 17's,. 3" leveling kit and -34 offset Racelines. Eibach truck springs, Bilstein 5100 Ready lift UCA's Hellwig rear sway. All good! 2018 Ram tradesman. Lake Havasu ☀️ AZ
2015 RAM 1500 with 3.5 suspension lift With 37x12.50 on 18x10 w/ -24 offset. Had to trim a lot, not just the plastic but the part of the metal corner piece of the fenders too.
My ram 2012 1500 4th gen 4x4 big horn crew cab. I’m running 35/12.5/20 toyo open MT’s tire and xtreme Mudder wheels combo with leveling kit 3.5in front and 2.5 in rear and installed RC 3” body lift kit with 4” RC adjustable monotube rear shocks and RC 2.5” lifted loaded front struts. And 3” wheel spacers. Absolutely love the look. Easy install on suspension and body lift if your not dumb and have tools. Can’t go wrong with the cost. No extra trim was needed or rub issues
Correct me if I'm wrong but I thought they separated in 2009, for all truck models? I even googled it and got the same answer, but I've seen more than one person say the same thing you're saying. Ps sorry, I'm obsessed with ram/cummins trucks lol
I feel like Chris Tucker talking to Jackie Chan in Rush Hour watching this video. "Do you understand the words that are coming outta my mouth?" I'll just email you guys when it's time for wheels and tires lol.
I have a 2017 dodge ram 1500 2WD ima install a 7”inch MaxTrac lift and ima go with 24 by 14 American forces with 35 inch tires I probably gonna have to trim just a bit
I'm a 4rth gen owner of a beautiful gray on black, 5.7 hemi monster ,hahaah like it's my 5th child and I treat it as so. She is so beautiful and powerful, I wouldn't own any other year of truck, I've owned a 2010/2014/2016 ..and none of them have been as awsome as this truck....
35x12.5 on mine with 5100 level. ridge grapplers. just have some minor rub at full lock fuel tritons. inner fender well... literally need to zip tie the fender back. bils are set at 2.0
I have a 2014 ram crew cab1500 with a 6 inch zone lift. I have -24 xd x10 in rims now can I use -44 12 inch wide rims with out any finder rubbing. I'm running toyo 35 open country extreem at.
I’m running Nitto Trail Grapplers 33 X 12.5 R20. No trimming. Rubs the inner fender well in a spot about the size 1”x2” at full turn. I have 3” leveling blocks on the front.
i have a 2017 Ram 1500 with a 6" lift and 37x12.50R20x10. Toyo Open Country MT. Some trimming of the side/rear of the plastic airdam and a little behind the front tires on the metal. It seems that you get the rubbing when the suspension compresses on uneven ground and backing up when turning. Im now wanting to go with 22" wheels by 12" wide and either 37" tires again or 35".
Im running a 3.5 in front level 1.5 inch rear supreme suspension level kit stock 20's with 35x12.5x20 minor rub at full crank, annoys the heck out of me ,gonna go bds 6 inch with some motto metal 962
Check out our gallery on our website! It will show you what others have made fit on their Toyota Tacoma! www.customwheeloffset.com/wheel-offset-gallery
Michael Neuhaus I ran 35’s on my 2014 ram with a 2.5” level without any rubbing on the factory sport wheels. I’ve also got a buddy that ran a 20x10 -19 with 35’s without rubbing.
@Anthony hamoui 4" BDS. It's funny since I wrote this 4 months ago I put the Rough Country pre loaded struts for 4" lift on. For some reason I was rubbing the plastic inner fender like crazy. I ended up having to trim about 3" of the plastic off to get my tire to stop rubbing. It didn't change my height so I don't know why.
Do 3rd gen rams so I know what I can fit on my stock ram I’m running a 305/55/r20 on stock ram rims but I want know what offset rim I can run new tires and rims and have the stance I want
I have a 4th gen on a 6 inch RC lift with a 3 inch body lift. Sitting on 38x13.50. Wheels are 20x12 -44 offset. I only trimmed the lower plastic part that sits under the bumper. Other than that I haven’t noticed much rubbing lol
