I am not able to wrap my head around what exactly makes, a BRAM. Since BRAM has variable width and depth, does it mean each and every bit of it is independent and addressable?
Try working on some examples related to VGA. Those examples usually use block RAM's and you will also get a chance to practice. Another way to practice is to create a GCD calculator using (datapath+controller) and try feeding the design values from a ROM.
Thanks for your video,but I don't really understand the first two ways of generating a BRAM at around 12:39.It would be much better if you can describe it using some more specific instances,such as code snippets or showcasing it yourself. Still,this is an awesome video,best regards from China.
That was very informative..Sir I have a doubt.. Suppose Ihave a textfile and wanted to take its contents and store in this Block Ram.. is that possible?
Hi Russel, Could you tell me how to write a testbench for a BRAM of depth 50. I mean if the address we use for BRAM, Ex: bram(addr1) is more than 50 in terms of depth, how do you provide a 50-length long value for it in the testbench? Thanks, Varun
I didn't write code for this... so any example code that I show I didn't personally create. However this looks like just a way to create a variable length memory. 1
Hi ! I am working on a program where I use your UART_RX and UART_TX to write back and forth to my MAC. But I want to save state on the fpga between reads and writes. For example, to calculate the sum of numbers arriving on the UART_RX then send the sum back to the MAC on the UART_TX. Can I put the "sum" variable in bram and still maintain state ?
BRAM is used for large amounts of data. "sum" is probably just a 16 or 32 bit register. That's small enough that it can go in normal register space. If it's > 1kb of memory then that's when BRAMs make sense.
@@Nandland Thank you for responding so quickly. 8-) Ok. So I am using your uart.v code with UART_RX and UART_TX. Between the two subroutines I stuck another subroutine that is called like this CHANGE SMALL (.a(w_RX_Byte), .b(o_Byte)); and then o_Byte is passed to UART_TX. The subroutine I use is called change.v and looks like this: module CHANGE ( input [7:0] a, output reg [7:0] b ); always @(*) begin sum
Ahhh, a small glimmer of understanding.... I was not using the correct architecture for passing in the full byte from UART_RX to my module. Inputs to a module are always wires. Outputs must be wires if they are going to be passed along to another module...
Thanks for the video, I have a question. You mentioned at the end of video, BRAM is not recommended for large design.. then what is another option for large design?
I think I said that I don't recommend using the interactive GUI for creating BRAM for large designs. That's when I'm talking about what method to use to create the BRAM.
Thanks for the video, but you said that creating block of RAMs using interactive GUI is not recommended. Personally, I disagree with you and I think that depends on the manufacturer of the FPGA. I use xilinx core generator and I can see that it provides optimal solutions for many designs
I recommend it for beginners. But I've worked on projects with 50+ independent Block RAM GUI created cores. It's a nightmare. I prefer inferring them when possible as you get more comfortable with FPGA design.
Block RAM or BRAM is a type of random access memory embedded throughout an FPGA for data storage. You can use BRAM to accomplish the following tasks, Transfer data between multiple clock domains by using local FIFOs. Transfer data between an FPGA target and a host processor by using a DMA FIFO