What Is An Immobiliser? How Does It Work? And How Do You DELETE It?

Подписаться 403 тыс.

Просмотров 183 тыс.

50% 1

What does your car's immobilizer do? How does it prevent thieves from stealing your car? Let's be honest, it doesn't. That said it might slow them down, or deter them from taking the extra time, and in the end they'll move on to an easier target. I'll go over the history of immobilizers, what they do in general, and how a few different generations of them work. We'll also cover how to delete them with many modern cars your tuning software eg. HP Tuners can do it, and try to delete the SKIM module out of this Jeep that won't give up.
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make RU-vid videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CheapJeep #DIY #Immobilizer

Авто/Мото

Опубликовано:

25 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 604

@wingedhorsegarage473 2 года назад

Field mice, the world’s first immobilizer! 😄

@WatchJRGo 2 года назад

Ah yes, takes a couple hours to immobilize, then another 2-3 hours to re-mobilize 💯

@robertlee9395 2 года назад

@@WatchJRGo Have you seen them load a wiring harness from the rack into a car body on the assembly line? You might want to raise that time estimate Jr. LMAO!

@alansmith4734 2 года назад

Sugar in the gas tank, was a Reverse Immobilizer!

@RexerYTRexer 2 года назад

@@WatchJRGo proper way to cycle is to turn back to accessory (past off) and back to ON position three times within ten second period with atleast a second in between a cycle. I wait for 3 beeps and it always works unless the magnet in the fob is damaged or missing.

@grizdeluxe 2 года назад

Typical Jeep junk.

@colingoldthorpe5918 2 года назад

I was dropping kids toys off at the charity shop when the guy came running out after me saying “Hey man your car keys are in the kids buggy you dropped off” I turn around and he hands me a set of Mitsubishi car keys. I ordered another replacement key years earlier for the wife’s Mitsubishi Outlander at a cost of $500. Our son years earlier….must have picked up the car keys and put them in his little fisher price buggy he sat on and drove around the house for like 5 years as a kid 😂😂😂😂 The wife blamed me for loosing those keys years earlier too, it made us laugh so hard. When I sold the car the kid said why is there three sets of key’s… I said don’t ask 🙄🙄🙄🙄

@kprosshia4258 Год назад

🤣🤣🤣

@jeremiahgaskins7205 2 года назад

This type of video should be a regular: Tailgate Talks... Honest conversation, no clickbait sensation.

@edwardndriskoll 2 года назад

Like soapbox but tailgate A1

@h-linetv1082 2 года назад

Seconded!

@cl7510 2 года назад

Caterpillar has “Toolbox Talks” meant to be a daily or maybe weekly safety meeting. We would get them emailed to us and we’d go over the content before we began work in the morning. I don’t know if Cat still does this as it’s been years since I’ve been involved in a toolbox talk.

@phishphood423 2 года назад

Gotta keep a 1st gen XC90 around for that ;)

@dragonbrownies517 2 года назад

Tailgate Talk Tuesdays or Thursdays. No clickbait, no fuss, no muss. Just Talk.

@tedbiernacki376 2 года назад

JR , I think you missed you calling. Your young still yet, you make a hell of a good teacher ! Your calm, concise, and and sort of a monotone voice that's easy to listen too and your chain of logic is easy to follow! Great tailgate talk !

@gregorymaupin6388 2 года назад

An electronic immobilizer something that drives drives JR absolutely bonkers and makes for great RU-vid videos. Absolutely RIGHT TO REPAIR should be for everyone.

@andybrooks7228 2 года назад

Absolutely true the days of buying something means owning something seem to be long gone.

@mikefrazier9508 Год назад

Auction buy...98 Camry no key at all. Locksmith cut an entry key but it won't start the car. How to bypass this damned immobilizer

@RexerYTRexer 2 года назад

You have to cycle the ignition after it says cycle ignition meaning turn key all the way back to accessory and back to ON position (not start) three times within ten seconds.

@theEagleBeagle 2 года назад

I used to work at a place where like 20 employees needed keys for our fleet of company ford and chevy cars. they used the chip keys. So my mechanic took apart the steering column and hides a chipped key in it next to the cylinder. Then we can make all the cheap generic keys we want for them!

@rpavlik1 2 года назад

I mean, that's basically what an aftermarket remote start installer does.

@mph5896 2 года назад

The early 2000's GM cars, you could cut the wires to to transponder and place a resister inline. Reset the key with the 10 min learn x3 and you bypassed the pats with a 10 cent resister.

@thomasgurga4062 2 года назад

I’ve had a regular Cherokee not grand Cherokee with the same issues with skim. Found a same year ecu/pcm an unplugged the skim an tossed the ecu in. Ran great, best part ecu from pick an pull was only $75.

@johnputney8052 2 года назад

Hey JR, try a different key. I have a 2011 Jeep and used pin pull to get my code. I had a key that failed programming, it kept saying programming complete but the key never worked. I ended up buying an OEM key, had it cut and programmed it myself. Bam, successful programming and a working key.

@TakuroSpirit77 2 года назад

Yup, sometimes these keys fail. And you don't have to spend OE money for a new key. A quality Strattec key for cheap works just fine, and make friends with someone at a Jeep dealer to program it. Takes all of 15 minutes. Unless the SKIM module is borked....

@OMGWTFLOLSMH 2 года назад

Yeah, I'm not sure why he thinks the key is fine if he didn't see it running with the old engine. Get a new key and start from scratch - and DON'T engage the starter when "cycling" the key during programming.

@ttww1590 2 года назад

Most keys can't be reprogramed, write once read many. Once he deleted it a new one needed to be used.

@commandtheline 2 года назад

This is the lockpickingJRGO and today we're going to talk about chip keys.

@anman366 2 года назад

1 is binding

@marcusgriffin279 2 года назад

LPL and John Ross colab! Would love it!

@zoomer2965 2 года назад

Except LPL wouldn't have shown you his Camaro key and its resistance value on screen.

@JayDeBee 2 года назад

One day at Home Depot I entered the wrong Chevy Blazer… legit same color, same key to enter. I was freaking out. I was like who the hell cleaned my car!

@CR7659 2 года назад

many years ago I took the key out of a '64 Riviera in one junkyard. Looked at buying a '56 Special in another yard, maybe 10 miles away from the first. For some reason tried the '64 key in it. it worked.

@detonater1348 2 года назад

U for real? First time hearing something like this happening and always wondered if it works.

@maddexxx847 2 года назад

I knew someone in high school that this happened to him with his dodge colt. There were 3 exactly the same in the HS parking lot.

@16DenaliDuramax 2 года назад

We had a couple guys in the Army who had two different Chevy vehicles. They would mess with each other by stealing stuff or moving stuff around in the other ones vehicles. Chevy Silverado and Chevy Tahoe

@icanfartloud 2 года назад

I want what you're smoking

@bdpopeye 2 года назад

JR your calmness over this issue is amazing. Eventually you will get this sorted. You have such great knowledge on everything you do and you post such great videos. Thanks for posting!

@OMGWTFLOLSMH 2 года назад

Hehe, it's called the miracle of editing. I'm sure curse words were said.

@jerrycapizzi2081 2 года назад

This immobilizer history demo was actually pretty interesting. Great video.

@davedelarosa319 2 года назад

I appreciate your determination in chasing this down. I had a '93 ZJ with the IR "security" system that would give me fits. I drove it for a few months, burned several quarts of oil trying to fog the NW side of ATL for mosquitoes and sold it for what I paid. Still would like to have another, but only if I could get rid of that infernal system.

@nachobroryan8824 2 года назад

This is why I put my keys in a faraday cage otherwise known as an antique penguin ice bucket.

@WatchJRGo 2 года назад

Yup, my keys stay FAR away from the walls of the house 💯

@randyhutchinson5253 2 года назад

What is a faraday cage?

@nachobroryan8824 2 года назад

@@randyhutchinson5253 What mclean1983 said. Aluminum foil will work as one. If you completely wrap a keyless entry fob in aluminum foil the fob won't work. Some people buy faraday cage wallets but that's a little too extreme for me. I only put my fob in a metal enclosure when I'm home. But also because that particular ice bucket has sentimental value.

@randyhutchinson5253 2 года назад

So it’s for theft? If the key can’t transmit?

@AndrewAMartin 2 года назад

@@randyhutchinson5253 that prevents thieves from using a radio transponder to read your key while it sits in your house, then retransmit the code to unlock and start the car.

@MrMattDat 2 года назад

Absolutely love the insight into your work done off camera. Great job and I am sure you will solve the SKM issue.

@jrmason 2 года назад

Good talk on how these things work. I'm a remote starter installer and have had to deal with these things for years now. Of course as installers we can only bypass working versions. Have a good one! -Jon

@16driver16 2 года назад

My grand cherokee used to immobilize I'd just put the key in the door and lock and unlock it 3 times and fixed. Didn't have a chip or keyless fob so it was all I could do

@yunked210 2 года назад

Excellent video Jr. ! Your optimism prevailed! Awesome personality

@moonpie2637 2 года назад

JR I am always amazed on everything you have an understanding for. You have to be one of the brightest minds on RU-vid.

@RS-cd9cf 2 года назад

You realize it didn’t work ?

@moonpie2637 2 года назад

@@RS-cd9cf You aren't the brightest tool are you. So you think knowledge is only had or gained when something works. You obviously wouldn't understand how progress is made and new things are learned. It seems to be a conversation over your head.

@RS-cd9cf 2 года назад

@@moonpie2637 thanx for the long reply, I’m glad I’m in your head !

@moonpie2637 2 года назад

@@RS-cd9cf Its 4 sentences. Maybe to you that's a "long" reply. You are just proving my point.

@RS-cd9cf 2 года назад

@@moonpie2637 in your head !

@billynunns 2 года назад

Loving the videos that explain these various car stuff. 🚗 Keep up the great content.

@antonioricardo1131 2 года назад

Started watching your YT channel since last year and i love your videos, big fan of your work

@robertlee9395 2 года назад

Always informative. Always positive. I just don't watch that many automotive RU-vidrs anymore. They just ain't makin' it! No time for whinners or braggers!

@qbanz00 11 месяцев назад

Dude I watched you grow from back in the day when I watched hoovies garage. I hope you’re still on the grind and doing your thing . You had a lot of interesting videos

@RobertWilliamsSr 2 года назад

Dorman actually makes a key programmer that plugs into your OBDII port - It will let you make your own key. I've used it on two WJ's now and it works well.

@1mlb704 2 года назад

This is a little different than the typical WatchJRGo video, but I really like it. Very informative, thanks JR 👍

@ThomasPlatt1975 2 года назад

I liked it too, and he is really doing well at explaining automotive repair.

@ivanbou 2 года назад

This is JR telling me how an immobilizer is easily defeated and doesn’t deter car theft and he has been baffled in defeating it… 😂😂😂

@youcanthandletruth7340 2 года назад

Cycle the key means just turn it thru the positions, not cycle start it ?

@Rmasters33 2 года назад

One of the best immobilizers I encountered was also one of the simplest. Wired to the brake pedal switch, when the pedal was applied it killed the ignition, There was an On/Off toggle switch. It was very effective because a thief stealing the vehicle at some point had to hit the brakes, and often it was when he was in the middle of the road or an intersection. Highly visible when the engine died the thief would bail.

@shedmartinez5979 2 года назад

I had to replace my PCM and had them disable skim in the past like you said. Worked great no more issues.

@bedrat2223 2 года назад

What you really need is a DRB III or a DRB III Emulator, you can program the keys and fobs. I'm going through that right now with my wife's 2004 Grand Cherokee, I have new keys and fobs but because it only came with one set I can't program the new ones and the fob is a pain in the ass because she has the memory seats and only the dealership can program them according to the interwebs. I can't wait to see what you end up doing to get ride of SKIM, hopefully without having to reprogram or replace the ECU. The PIN is an odd one, I was able to go to my local Chrysler Dealership walk over to the parts department give them my VIN, ID and vehicle registration and them called and got me the PIN no charge. The parts department guy said I was lucky some of the new PINs only last 15 mins and then they have to recall for a new PIN.

@Leebs 2 года назад

JR's "story time!" Love this type of video now and then

@wolfman9999999 2 года назад

My Brother installed an immobilizer on his Jeep Cherokee XJ. It literally did save his Jeep from being stolen. I installed the same brand on my Wrangler. I don't live in the greatest of neighborhoods, and it's the easiest one to get access to in my fleet. It's nice peace of mind.

@jjjacer 2 года назад

For the GM resistor keys, as the lock cylinders got worn/and so did the keys me and a friend usually bypassed ours by cutting the cable going to it and putting in a resistor between the two wires so it was always given the correct value. luckily it was always in an easy position to get to and only took around 30min to do

@jhl6464 2 года назад

Great content. Great Job JR!

@mph5896 2 года назад

Got any transponder codes? I had a Durango, owned by a city. They sent it to the Dodge dealer for skim issues. The dealer replaced the PCM and was unable to reprogram the skim. City took the car backhand sold it dead at auction. I bought it. Turns out a fuse was blown that sent power to the skim module. I found this out by checking power and grounds at the skim module. Replaced the fuse and reprogrammed the keys. Was good to go.

@mikerawlins4199 2 года назад

Once you erase all keys, you can’t reprogram the old key. Need two new keys to program. We always call a local locksmith that have the capability

@WatchJRGo 2 года назад

I did try just programming the original key first... it wouldn't take that either. 🍻

@Tenzen. 2 года назад

@@WatchJRGo I think he said that the process used is intended to program new keys not old keys since he said "you can't reprogram the old key".

@jeffeastman625 2 года назад

The original key has failed. Probably water intrusion on the chip. It’s dead, Jim.

@ttww1590 2 года назад

@@WatchJRGo Sounds like you miss read. Keys are write once. You need two unwritten key. Also could be edit but the key cycle was not shown correctly.

@MyLifeThai371 Месяц назад

For that style of immobilizer you can just pull the ecu, ignition key, ignition cylinder, and the immobilizer halo ring that surrounds the ignition cylinder from the junk yard vehicle. You then install all those parts in your car and make a buch of cheap $6 spare keys at Walmart and then tape the key with the chip near the immobilizer halo ring inside your steering column and you are good to go.

@coolfrost6 2 года назад

When I got my 01 skoda octavia stolen, and I godt it back, they had done some coding to the ecu. The no key light would blink, but the car never shot down. Apparently you can buy a box of alibabba that defeats most vw bosh ecu's for 20$.

@corndizzel 2 года назад

That's a grey key? Isn't that a valet key? Maybe that's the issue? I know the valet keys limit things? Maybe the issue?

@KatoJac 2 года назад

Was just thinking that. My Honda also has a grey valet key.

@corndizzel 2 года назад

My TL has the same thing.

@wriddle082 2 года назад

Yeah I think Honda valet keys have gray jackets and regular keys have black jackets. Always thought it was similar for other manufacturers.

@lethalp1mp 2 года назад

Chrysler keys of that vintage are grey, not a valet key.

@dj-kq4fz 2 года назад

Would cycling be to accessory position (or just shy of start, run I guess) then off vs the start position? Probably not, but worth a shot?

@dipren443 2 года назад

Came to make this same comment. This has always been my interpretation of cycling the key.

@nofear1999 2 года назад

Unless he didn't show it on camera, as there is a cut, he didn't cycle it correctly.

@RexerYTRexer 2 года назад

Exactly what I just commented proper way to cycle is to turn back to accessory (past off) and back to ON position three times within ten second period with atleast a second in between a cycle. I wait for 3 beeps and it always works unless the magnet in the fob is damaged or missing.

@dipren443 2 года назад

@@RexerYTRexer yeah. My understanding is if you go ahead and start the vehicle, you have to redo whatever process you were trying from scratch.

@OMGWTFLOLSMH 2 года назад

Yep, I would have tried cycling just to the point of not engaging the starter. That's how I remember doing it on our PT Cruisers. On the flip side, why is JR wasting so much time with this? Hours and hours. Is his time not more valuable? It would have been cheaper to go to the dealer and get a factory key.

@FreakinJeepGarage 2 года назад

Another option is to get a matching ECM, SKIM, and key from an identical Jeep (from a salvage yard). Swap ECM, Zip tie the key to the replacement SKIM. Then plug the replacement SKIM with key in and tuck it up under the dash.

@plantedinpr886 2 года назад

I fixed a Pontiac Bonneville using that solder into the resistor trick. I remember it being and orange wire. I never thought about how to steal a car like that, but now that you said that there's only 14 different resistances, if I were to stay with that car long enough, I guess I would be able to get it running with no key. :-)

@jameskasza3718 2 года назад

I've owned 3 WJs and worked on numerous more and never had this issue...but on my 95 zj which has a similar key I was experiencing the same issue. The drivers side key cylinder had a 2 wire electrical connector attached to it by disconnecting and jumping that harness I was able to bypass the security and drive the jeep without issue.

@bobbyd4120 2 года назад

really enjoy the sit-down discussion video format

@michaelflynn8783 2 года назад

Other than the immobilizer had pretty much the same issues with my $1k Grand Cherokee oil cap broke dipstick handle broke off. I had factory lights but they were faded so I had to polish them out. Other than that its been a great little daily driver runaround when I dont want to use my work van. And for $1000 out the door you cant realy beat it these days. One thing about mine is the 4.0 gets fantastic fuel mileage.

@Hotrod1965 2 года назад

Back in the day when I had a '94 Grand Prix, I went to Radio Shack bought a resister that matched my key, and with a little help from my Dad who was a GM mechanic, wired it inline to my ignition. No more GM immobilizer.

@blackcountryme 2 года назад

The best keyless entry remote is the one with a movement sensor, if the key isn't moving it won't open the car, that slows down the "Relay attack" from your keyfob to the car

@transtubular 2 года назад

A buddy of mine and I had Z cars (Datsun 280Zs) that were only a year apart and we discovered soon after I got mine, that our keys would work in each others ignitions. He asked me to help install a fuel pump cut out switch after mine was stolen from where I was working one day. I got it back in one piece and not thrashed. Drove it for a year or more after that before replacing it. I still miss it though. But it was rough and a little banged up.

@insaneiaq 2 года назад

The key from my 77 280Z works in my 83 ZX Turbo. Quite handy actually since the ZX didn't come with a key!

@wjthehomebuilder 2 года назад

So basically, the immobilizer just keeps the honest person honest.

@WatchJRGo 2 года назад

Just like door locks! 💯

@georgeboatright6635 2 года назад

i think this is your best presentation. thank you.

@bretthibbs6083 2 года назад

JR on jeeps you have to hold the gas pedal down a little to keep it running after a dead battery. I have a 2000 wrangler and after my battery died I had to charge it and then hold down the gas pedal for a few minutes until it relearns the idle

@davidmacdaddy4875 2 года назад

Could you close the doors and put the key in the lock and reset the system. This happened on my old Chrysler. Try it!!

@franktyred9195 2 года назад

I bought a 97 XJ for $500 because the owner had done some electrical work that caused problems for the ECU. Long story short I finally pulled the Body Control Module out and discovered that I could start the Jeep and run it with no problem. Now, there are no gauges or lights, but this was enough for me to be able to move the Jeep around while working on another truck.

@keithmason9342 2 года назад

I had a #66 Sport Fury that I put a toggle switch and a push starter button in the center console glove box. The key only activated the gauges in the dash.

@darinvee4980 2 года назад

Try feathering the throttle peddle like you would for an old carburetor car. I have a 2004 Grand Cherokee and any time the battery goes really low or dead the first start up requires me to manually run the throttle. I take it for a 1/2 mile drive and the computer relearns the idle mixture.

@waylonp6924 2 года назад

lol are You trying to make a gone in 60 seconds sequel

@tackac7815 2 года назад

Time to replace entire engine , less than 24 hours. Time to work around electronic speedbumps, forever....

@martinp.9853 2 года назад

You're my favorite youtuber!!

@dirty2jz283 2 года назад

That key could be a valet key or have a bad chip inside the key. I would get a new trasponder key. Im sure you did by now already. I was a auto locksmith.

@dansteffee9759 2 года назад

You right , gray is valet key .. back in the day you would get 3 sets with car

@randoggerk 2 года назад

Had 2 sets for mine,both gray.

@TakuroSpirit77 2 года назад

@@dansteffee9759 This WJ isn't fancy enough to have a valet key. All immobilizer keys were gray, and valet keys would say VALET on them if I recall correctly. If it has a pentastar or JEEP on it, it should work just fine.

@RexerYTRexer 2 года назад

He didnt cycle the key after programing it proper way to cycle is to turn back to accessory (past off) and back to ON position three times within ten second period with atleast a second in between a cycle. I wait for 3 beeps and it always works unless the magnet in the fob is damaged or missing.

@nofear1999 2 года назад

I have an '04 and the gray key is a valet key but it still works to drive it. They need it to run to park it. It just doesn't work on the glove box lock. My black master got lost and I had a locksmith make a copy from the gray key and he was able to program it.

@officialWWM Год назад

We are experiencing a bigger problem here in Australia now that cars have gotten very hard to steal. Thieves are now breaking into peoples houses to steal the keys for cars!

@jethro83100 2 года назад

I love your channel, time spent vs. dealers, which is less expensive lol

@VioletPrism 2 года назад

Great informative video :)

@clarkleakins879 2 года назад

I don't know that year of Cherokee. However, I have a 1998 with a similar shut down after brief run, or often just running down the road. Trouble shooting....grabbed the 3 harness plugs at the ECU, wiggle while trying to start/running, created the same symptom. Turns out that the ECU had failed solder joints on the board sockets. So. ... Remove the ECU from the firewall. Carefully open the ECU. Remove the gel coating. Under magnification, solder cracks are visible. Use acetone on a wood swab to remove/dissolve the "conformal coating" at the solder locations, ALL pins just to be sure. Proper solder iron, and tip. Flux and the proper solder. Re solder at ALL pins. CONFORMAL COATING reapplied!!!! Reassemble the ECU. Reinstall in car, waited for the battery to reset. WA LA! Runs like new again! TIP.... the dealer will fix for $1800! And they remove said ECU. Send to some outfit in GA(?). Then reinstall. ALSO, junk yard ECU...MUST be the EXACT same version, alphabet serial code label on the outside of the ECU. Otherwise, you will need to have dealer "reflash" ECU. AND, they refuse to do unless they install the ECU. That has been my experience.

@BRBTechTalk 2 года назад

1:31 I had an electric fuel pump on my '72 GMC pickup that had a hidden switch under the dash. The truck really was a POS, but where I lived they got stolen for parts all the time. Was great until I let my brother pick it up from the shop for me and did not tell him about the switch. He only got 1/2 a block then had to call me for help.

@larrybe2900 2 года назад

Sort of like giving my brother my PU for a trip to pick up something out of state only forgot to give him my key to the gas cap.

@mullinsjm1 2 года назад

I bought my 23 year old truck a couple years ago, and wanted to buy a remote for it. Local place mom and pops place wanted 80 dollars. Oriellys wanted 60. I bought 2 off Ebay for 5 bucks and programmed one myself. This is the way it should be.

@welldontdothat 2 года назад

My 1999 Chrysler Town & Country once decided to "immobilize." The system was somehow part of the gauge cluster, and I learned that a cold solder joint on the ground for the cluster wiring harness was what was causing the car to turn off after running for two seconds. After I re-flowed the solder on the circuit board for the plug, the vehicle was back to normal. Check that, maybe?

@paulauld7498 2 года назад

I had a 1988 Corvette with that early GM "chip" key. Around 1996 it got to where it wouldn't start. Dealer had to replace the ignition switch. It wasn't cheap.

@duffy9340 2 года назад

I have a 03 Town car. Suddenly none of the three keys work and the security light flashes. What part of the PATS system could it be do you know?

@willlyons3038 2 года назад

Had the same problem, turn key forward, then push accelerator 3 times. Turn key off, then it should start. It worked for me, 99 grand Cherokee

@StraightOuttaContent 2 года назад

Another amazing video

@robluck21 2 года назад

Great educational show

@richarddavey5991 2 года назад

Hey JR I have a 03 jeep grand Cherokee looks like the one in this video. Crank no start I have checked and test crank and cam good to go have gas pressure engine just rebuilt by me so compression should be good/ a buddy said maybe ECU have nothing but a plug in diagnosis it said code 1389 for jeep all wires look good no blown fuses? what is next?

@Cartier_specialist 2 года назад

I think the mess of the headlights wiring harness has something to do with why you don't have low beams.

@troypeacock5754 2 года назад

"The club" greatest immobilizer ever!!

@dastrayer63 2 года назад

My neighbor's Tennessee walker thought my truck was his dog house. He had a beautiful alarm tone, and I would not want to fight him. I loved that dog. I was tho only one allowed in (including the dog's owner).

@VanisleNSX 2 года назад

Interesting stuff! Now that being said, let’s see some more warehouse upgrades content!!

@harryballzack 2 года назад

I had a ‘90 S10 and it’s keys worked in my neighbors Camaro. We were all time pranking each other. 😂

@danielclark5170 2 года назад

That makes you want to have the 4.0 jeep motor with a distributor and regular transmission that used vacuum control for shifting.

@nalgonbernal2577 2 года назад

What is the part number for that oil cap that you use for the jeep I need one

@MrVnick1 2 года назад

This is why I horse and buggy everywhere

@Lufbery1337 2 года назад

Loved this format! Do you think there’s a pretty good chance it’s really just there to allow the dealers to get $140 profits on keys?

@maddexxx847 2 года назад

Bingo 👌🏻. That’s how they get you

@isaacsoderlund9677 2 года назад

I dont believe that. Locksmiths charge higher because of the cost of software and hardware required to copy/program keys. Manufacturers are trying to keep cars from being stolen and as always, engineers make things more difficult than need be. The "right to work" issue is very real though.

@B0xlife1 2 года назад

I don’t know anything about the Chrysler system, but Could it be that the transponder chip inside the key is bad? So no matter what you do it’ll never work because the transponder chip isn’t working correctly you know the things to go bad if the keys original and it’s been around forever there’s a good chance that perhaps that chip is no good anymore I’m not putting out a signal are not doing what it supposed to do so no matter how many times your program it and do this and that it’s not gonna work I think you just need to give up and get a different key or just suck it up and take it to the dealership I guess right? Does anyone agree with me on this or is that not possible.

@earlk6 2 года назад

WELL My brother had a similar problem, after going to two different dealers and several weeks of frustration had a older mech come back from vacation and found his problem.. it turns out there is a module located under the pass side head light, had to cut a hole in that area to access it, that is part of the immobilizer system, Not on any wiring diagram supplied by the local jeep dealer. He only knew about it because back in 2004 he attended a class in Detroit where they told them of this module and that is was not going to be recognized in any factory publications. Replaced that piece, covered by warranty by the way, car started and has been flawless for the last 4 years..

@hondofourfivetwo9347 2 года назад

I just purchased a current generation Ford I’m definitely getting spoiled by that 2 way smart key not to mention Ford pass on my phone. That GM VATS system brings back memories I used to cut and copy them all day long back in the day when I worked at a rental company. Biggest 🤬 back in the day was having cut keys from the code by hand with the little key code cutting tool, I had about a 50/50 success rate with them.

@nathansautodetail 2 года назад

I bought a 2009 Volvo V50 recently and the buttons on the key/remote all in one thing didn't work, but the key would start the car. So I had to pull out the physical key to unlock the doors which set off the alarm. It was annoying. So I called a locksmith and they couldn't program. Had to go to the Volvo dealer who said the key needed to be replaced. A new key (not including even the emergency physical key blank, let alone a cut key) cost me $460. I've had the immobilizer antenna fail on me on top of a mountain in my 2001 Mazda B3000 when I was out of town on July 4th weekend. I couldn't source a part (even tried the junkyard) and had to take it to the dealer who charged about $200. At least with that truck it's easy to program. I got some new keys for it recently and had them cut and then programmed them myself. Same with the remotes when I first bought the truck.

@Behemoth66 Год назад

So I have a mclaren and sometimes it fails to work with my key. I switch ecu’s due to one is a stock ecu and another one is tuned for track use. Can I just remove the immobilizer from my mcalren to avoid issues?

@rogerdinarte6531 Год назад

I need help deleting immobilizer on my 2001 audi a6 Quattro. How do you do these cars? It was starting before my instrument cluster fried up, installed a junkyard one but doesn't let it start. How can I bypass this?

@jdeltoro518 2 года назад

Continue troubleshooting. You'll get it. How's the Mercedes sage going?

@DeatGaming 2 года назад

On older VATS system its a common bypass to wire a resistor into series so it accepts any key.

@69Dartman 2 года назад

My Neon had a dealer installed immobilizer and finally one day it refused to allow starter to crank. I tore lower dash off and found where the thing had been tied in to the starter signal wire, cut it out, and twisted the wires together and drove home. Later I just put a crimp connector on the wires and drove it fine for several more years till it finally killed itself seeing how it's not a high current circuit. The 06 Charger RT I replaced it with has the skim but not the newest rf crap. I have both keys and they work.

@jimmullenberg 2 года назад

Are the headlights flashing? I fixed mine by putting the key in Passenger door and cycling it lock and unlock a couple times. fixed mine.

@nibbit1969 2 года назад

Nice video! My car does not start when you turn the key to fast..When i wait a few seconds it starts. But i have a fault code Immobiliser No signal. Any idea??

@CR7659 2 года назад

TK's Garage has several videos on how people can steal late model Chrysler and Dodge cars. A hidden switch is the best choice, the more you delay a thief the less likely he is to steal the car.

@jimmyweaver204 2 года назад

I used to work for a taxi company that used 1996/2002 dodge caravan Plymouth caravan and Chrysler town and country with the same keys and problem was a bad solder in the back of the Gage cluster. Try unplugging the cluster it will probably run. Replace with used or fix

@geraldbennett7035 2 года назад

uhmmm, can you get the ECU that is paired to that engine?

@ngraves1002 2 года назад

My dodge's and jeeps never ran with the gray key. Always had to use the actual keyfob. Gray key was only good for manually unlocking the door wich would set the alarm off. Even after a new immobilizer installed and programmed from dealer.