What is Soft switching | Hard Switching Vs Soft switching | ZVS | ZCS

Подписаться 60 тыс.

Просмотров 32 тыс.

50% 1

#foolishengineer #Softswitching #ZVSZCS
0:00 Intro
00:43 Hard switching
02:26 Hard switching problems
03:26 Soft switching
03:48 ZVS
04:28 ZCS
05:02 Soft switching techniques
05:21 Snubber circuits
05:45 Resonant converter soft switching
07:17 Advantages vs Disadvantages
References:
• Hard and soft switchin...
www.ti.com/seclit/ml/slup376/...
More Videos:
Resonant converters
Basics - • How do Resonant conver...
Hbridge Motor drive - • H bridge DC Motor cont...
Reverse polarity protection - • Different types of Rev...
Videos on MOSFET Drivers:
Types of Isolated gate drivers - • Types of Isolated gate...
Need of Isolated MOSFET gate drivers - • Why do we use Isolated...
Dual channel Transformer Gate drives - • Double-Ended transform...
Transformer-coupled driver - • Isolated High Side MOS...
Bootstrap MOSFET driver - • How does a Bootstrap g...
High side MOSFET switching - • P-channel MOSFET as a ...
Increase MOSFET switching speed - • How to increase MOSFET...
MOSFET driver totem pole circuit - • What is Totem pole MOS...
MOSFET driver working - • What is MOSFET gate dr...
MOSFET gate resistance importance - • Why do we need gate Re...
MOSFET driver circuits - • What are MOSFET gate d...
Videos on MOSFET:
MOSFET Avalanche Ruggedness - • MOSFET Avalanche Rugge...
MOSFET Avalanche Breakdown - • What is Avalanche brea...
MOSFET Inductive switching - • MOSFET switching wavef...
MOSFET & Inductor - • MOSFET switching for a...
MOSFET SOA - • What is SOA of the MOS...
MOSFET switching - • How MOSFET switching w...
Parameters of a MOSFET - • How to select a MOSFET...
Basics of MOSFET - • Difference Between MOS...
Videos on BJT:
PNP BJT as a OV protection - • How to design PNP BJT ...
NPN BJT as a OV protection - • How to design NPN BJT ...
PNP BJT as a Switch - • How to use BJT as a sw...
NPN BJT as a Switch - • How to use BJT as a sw...
Basics of BJT - • How BJTs Work? | How T...
CCCV Charging:
Part 2 - • CCCV Battery Charging ...
Part 1 - • How does a Battery Cha...
Current Regulators:
CCC with op amp &BJT - • Constant Current Regul...
CCR with BJT & TL431 - • Constant Current Regul...
CCR with BJTs - • Constant Current Regul...
CCR with Zener diode & BJT - • Constant Current Regul...
CCR with LM317 - • Constant Current Regul...
Power Supplies:
Voltage regulator using transistor - • Voltage Regulator usin...
Full Bridge Converter - • How does a Full Bridge...
Half Bridge Converter - • How does a Half Bridge...
Zeta Converter - • How does a Zeta conver...
Cuk Converter - • How does a Cuk convert...
Buck-boost converter - • How does a Buck Boost ...
Double Ended Forward converter - • Double Ended Forward C...
Active Clamp Forward Converter - • Active Clamp Forward C...
Forward Converter - • How does a Forward con...
SEPIC converter part 2 - • SEPIC converter design...
SEPIC converter part 1 - • SEPIC converter design...
Flyback converter part 2 - • Flyback converter desi...
Flyback converter part 1 - • Flyback converter desi...
Push-pull converter part 2 - • How to design a Push p...
Push-pull converter part 1 - • How to design a Push p...
Boost converter design - • How to design a Boost ...
Buck converter design - • How to design a Buck C...
SMPS basics - • Basics of Switch Mode ...
Embedded Systems:
SPI Communication Part 3: • Advantages & Disadvant...
SPI Communication Part 2: • SPI communication Data...
SPI Communication Part 1: • Basics of SPI communic...
I2C Communication Part 3: • Advantages & Disadvant...
I2C Communication Part 2: • I2C Frame structure Un...
I2C Communication Part 1: • Basics of I2C communic...
UART Communication Part 2: • Understanding UART Com...
UART Communication Part 1: • Basics of UART Communi...
Basics of Communication: • Communication protocol...
Power Electronics:
Power Factor Correction - • Power Factor Correctio...
Power Factor - • What is Power Factor |...
---------------------------------------------------------------------------
Check us out!
Facebook - / foolishengineer-407598...
Instagram - / foolish_engineer
Twitter - / foolisher25
Subscribe now for more videos like this!

Наука

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@TB-jl9fr 5 месяцев назад

In a nutshell, for ZVS and ZCS you either have a capacitive behavior (phase shift of voltage) or an inductive behavior (phase shift of current) which is especially important for LLC topologies.

@sandeeppinninti3087 Год назад

Really thank you so much I was searching for this from long back....

@user-fb4xh5ut8n 5 месяцев назад

Thank you very much․

@rameshwarshelke4633 Год назад

Really thanks u sir ,, Really waiting for next vdo passive and active snubber ckt..🙏

@FoolishEngineer Год назад

Very soon! keep watching

@apachecomm Год назад

Thank you very much

@FoolishEngineer Год назад

Thank you so much! Please show support to my video with Super thanks and don't forget to subscribe to our channel

@sudheerkumar5966 Год назад

Very good sir

@FoolishEngineer Год назад

Thanks and welcome

@sudhakarkulkarni1730 Год назад

Thanks for good information also include design details for same in furthet videos

@FoolishEngineer Год назад

Sure 👍

@learm67 Год назад

🎉🎉❤

@yugalkishor3131 Год назад

Can pls explain how we can achieve soft switching in converter using simulink.

@Simsol487 Год назад

by doing phase shift modulation

@yugalkishor3131 Год назад

@@Simsol487 can you pls make a video to explain in matlab simulink

@Simsol487 Год назад

@@yugalkishor3131 which type of circuit you want to simulate? like dc-dc, dc-ac ? to acheive soft switching

@yugalkishor3131 Год назад

@@Simsol487 high gain DC-DC converters...

@suyogsawant5045 4 месяца назад

Sheldon reference !!😅

@supersilve 10 месяцев назад

What about a practical example of how and where to measure if ZCS or ZVS is occurring? What parameters do you change (capacitor or inductor value etc) to tune your smps to achieve this? How much does the resonant frequency of the smps must be off from the switching frequency to achieve ZCS or ZCS? After seeing numerous videos no one has explained this yet. Thanks.

@TB-jl9fr 5 месяцев назад

For LLC converters you can use first harmonic approximation where you always want to achieve a phase shift of current.

@supersilve 5 месяцев назад

@@TB-jl9fr when saying the first harmonic you are referring to the fundamental frequency I guess as the first harmonic does not exist. To achieve ZCS from what I calculated on commercial smps it was found that the smps resonant frequency is about 1/3 higher than the switching frequency If I am correct. Kindly correct me if I am wrong.

@TB-jl9fr 5 месяцев назад

@@supersilve No, i'm referring to the approach of first harmonic approximation with LLC : www.infineon.com/dgdl/Infineon-LLC_design_guide_3300W_converter-ApplicationNotes-v01_00-EN.pdf?fileId=8ac78c8c86919021018713adb87d42e2

@nicoslider 6 месяцев назад

i have a question : when you talk about "inductance losses", it means "back emf current",right? if yes,does that means that ,an active snubber circuit, is placed there "to recycled it" ,in order do not let it goes back to the dc supply itself then? and so,prevented and protected it of destruction and/or parasites from this back current peak that is produce when the disruption is happening? thanks for your answer ;) ,excellent video ;)

@TB-jl9fr 5 месяцев назад

No. Inductance losses consist of eddy current losses in magnetics material but also hysteresis losses for bidirectional currentflow applications like LLC.

@nicoslider 5 месяцев назад

@@TB-jl9fr ok thanks , i think i get it, lotta thanks mate, so at least the fact to re use foucault current,rise up the gain to the secondary because no "leak of juice" reflowing into the soft switching circuitry then? am i right?

@TB-jl9fr 5 месяцев назад

@@nicosliderTo be honest i didnt understand what you have written. Soft and hard switching is only important for FET components like mosfets. Magnetics losses cant be avoid. You could only change the magnetics material e.g. reduce the core volume or using a more appropriate frequency for switching.

@nicoslider 5 месяцев назад

@@TB-jl9fr no problem mate, you gave the answer i expect, we just dont use same words to express the same bottom of this idea ;) thanks for all your answer ;)

@TB-jl9fr 5 месяцев назад

@@nicoslider Glad i could help you :)

@bdtp Год назад

What Software you use for this video? Please answer me..... Please please please.

@FoolishEngineer Год назад

after effects

@bdtp Год назад

@@FoolishEngineer Many many many many thanks

@jacobbassett9350 Год назад

I don’t see the difference between zvs and zcs. They look the same. Am I missing something?

@FoolishEngineer Год назад

Check again, mate!

@Simsol487 Год назад

there is clear difference between zvs and zcs,to switch with zero voltage is called zvc, to switch with zero cureent is called zcs.

@gregamidon9336 11 месяцев назад

More appropriate terms would be zero voltage switching (can happen during turn on or off) but a better term would be zero current turn off - i.e. you aren't trying to turn off with current flowing. Look at the waveforms and you may be able to see a clearer difference using these terms