No video :(

What is the best way to engrave slate tile with the xTool F1 Laser?

Подписаться 16 тыс.

Просмотров 12 тыс.

50% 1

With the xTool F1 laser having both an IR and Blue Diode laser modules it opens up more options for engraving various materials. So I wanted to find out, what is the best way to engrave slate tile. I test not only the difference between the IR and the Blue Diode laser, but also with how we prepare the tiles, from your basic unfinished tile, to sanded and finished with spray on polyurethane. I'll show you my results and you can decide what you think works best.
The following links are affiliate links that do provide a commission to this channel. I appreciate your support by using these links when making your purchases.
Buy direct from xtool.com - Use the following coupon code for an extra discount at checkout: xToolVin
xTool F1 Laser - www.xtool.com/...
xTool Smoke Purifier - www.xtool.com/...
xTool F1 Slide Extension - www.xtool.com/...
xTool RA2 Pro - www.xtool.com/...
xTool on Amazon
F1 Laser : amzn.to/46bO6Jh
Desktop Smoke Purifier - amzn.to/46bO9Vt
Laser Saftey Glasses - amzn.to/43b6WP9
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
/ vintauri
/ vintaurisworkshop
vintaurisworks...
www.amazon.com...
#diodelaser #xtool #laserengraver @xToollaser

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@KidneyMush 8 месяцев назад

I like your style, no arrogance or egotistical catch phrase etc…subscribing

@Vintauri 8 месяцев назад

Thank you! I try to keep it down to earth.

@sharitrowbridge8881 7 месяцев назад

Thank you!! We are doing slate tiles for a craft fair and relatively new to the stool. this helped so much!!

@Vintauri 7 месяцев назад

Glad it was helpful!

@kimvellore4134 8 месяцев назад

Thanks for doing this video, you probably saved many of us time and tiles.

@Vintauri 8 месяцев назад

Glad it was helpful!

@theoilykrafter 4 месяца назад

Thank you for the great video! I like all the different tests you performed! I will definitely try a couple of these to up my coasters!

@Vintauri 4 месяца назад

Glad it was helpful!

@Scuba_Son 6 месяцев назад

This is fantastic, thank you for the details and time to put this together.

@oriolesfan2463 10 месяцев назад

Thank you for the comparisons, helps a lot!

@Vintauri 10 месяцев назад

Glad it was helpful!

@magilla03 6 месяцев назад

Hey, Thanks a lot! I enjoy your videos and find them extremely helpful! I am realy grateful!

@Vintauri 6 месяцев назад

Glad you like them!

@danielastone7924 6 месяцев назад

Omg you save my life !! Thank you so much !! ❤

@Vintauri 6 месяцев назад

Glad it helped!

@JohnMark61355 5 месяцев назад

Thank you!

@Vintauri 5 месяцев назад

Thanks for watching!

@EB3D_Customs 10 месяцев назад

Nice!!

@Vintauri 10 месяцев назад

Thanks!

@stevewalsh5479 6 месяцев назад

Thanks. Any benefit to multiple passes? I found with metals and the IR, that helps.

@shughes599 4 месяца назад

What does duration do to the mark, increase/decrease etc. I suppose I will run a grid with it and figure it out. Nice content, that blue laser on sanded and finished is much closer to red laser output. I suspect I would go that way, prep a batch while burning designs.

@Vintauri 4 месяца назад

Duration is generally used in raster engraving to tell the laser how long to stay on each dot or pixel. That would be a good test to try, it would be similar to slowing down the speed and might give a deeper engrave depending on the power and number of passes used. On tile however I feel it would cause more of the yellowing look if it was set too long. I might have to revisit this and see how it effects the results.

@lucienvanschendel8262 10 месяцев назад

Very nice, Really depending on how much you have to produce, which settings you'll choose. Just a question, are you applying a finish after you engraved?

@Vintauri 10 месяцев назад

I'm applying the finish first, letting it cure and then engraving it. I've tried applying it after and it seems to mute the contrast and have a less brilliant white color.

@hedleypepper1838 6 месяцев назад

Hiw long before we see more powerful IR lasers in these machines, 8w probably the logical max with 4 IR diodes ?

@Vintauri 6 месяцев назад

It will be interesting to see if they can increase the power on the smaller diode IR lasers or will focus on the fiber modules.

@fruitloops68 8 месяцев назад

Awesome ! 🌞Do you have any links for the material tests?

@Vintauri 8 месяцев назад

It's really easy to build them in xTool Creative Space. Here is a video I did on the process. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NYZdJ3xTsMg.html

@Vintauri 8 месяцев назад

If you are using lightburn, the material test generator is there as well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DCfVc8L5NuI.html

@deannahepner9355 7 дней назад

Where do you get your tiles?

@Vintauri 6 дней назад

I have had the best success and price purchasing the bulk pack from Michaels online. They come out to be $0.75 each and I've only had a couple of bad tiles in all of my orders. The bad part is, you can only order them online and they are randomly in stock. Otherwise I've found them on Amazon from this reseller at about $1.00 per tile and they were decent quality as well. amzn.to/3AsfBn2