One of the things that many electricians struggle with wrapping their heads around is how a transformer works and what the difference between the primary and secondary side is. In today’s episode of Electrician U, Dustin dives in and gives some explanation to how it all works.
🤘⚡️EU Learning System⚡️🤘
For Individuals --- electricianu.c...
For Businesses --- electricianu.c...
-Video courses on every side of the electrical trade (theory, code, safety, wiring, install, troubleshooting, leadership, and more)
-Practice exams for 2017, 2020, 2023 code
-RU-vid videos categorized and searchable
-Audio lessons
-Forum
-Business version has admin portal and ability to assign learning to technicians and monitor progress
-Any business size from 2 techs to 2,000!
🎓💡CONTINUING EDUCATION💡🎓
Sign up here --- electricianu.c...
-State Approved
-Video Based
✍📝PRACTICE EXAMS📝✍
Get them here --- www.electricia...
-2017, 2020, and 2023 NEC versions
-Online Residential Wireman Exam
-Online Journeyman Exam
-Online Master Exam
-300 Question Online Code Cannon (not license specific, all code)
-Take as many times as you want
-All of the above come with printable PDFs
🎤🎧PODCAST🎧🎤
Spotify:
open.spotify.c...
Apple Podcast:
podcasts.apple...
📱👍SOCIALS👍📱
TikTok - / electricianu
Instagram - / electrician_u
Facebook - / theelectricianu
Reddit - / electricianu
Rumble - rumble.com/c/E...
Discord - / discord
🎧🎹Music, Editing, and Videography by Drake Descant and Rob LeBlanc🎹🎧
#electrician #electrical #electricity
A primary transformer is simply a piece of equipment that the utility company uses to step down their voltage to a usable level in a building. It could be any building- a residence, a 3-story commercial building, or a sprawling industrial site. The voltage that the utility uses is generally MUCH too high for us to be able to utilize in almost all building types and requires it to be stepped down to a usable range.
Remembering from previous discussions that electricity travels in complete loops. Transformers are no different. The cool thing about transformers is that it uses the relationship between the electrons and magnetism to do its thing! At the utility plant there is some type of generator starting the process. Wires leave the generator, then goes thru one side of the windings of a transformer, and back to the generator creating a loop. The voltage that is operating at this stage is very high probably at the 150kv range! Within the first transformer (or transmission type of transformer) there is a secondary coil that isn’t necessarily touching the primary coil, but the electrons get moving by the magnetic fields caused by the first coil and a different voltage is produced on this secondary side- probably in the neighborhood of 7200v. This is considered a distribution voltage range. Still too high for normal mortals to utilize but can be run thru neighborhoods to distribute to either the pad mounted transformers on the ground (those green boxes you see when driving along) or the pole mounted transformers. But we are still not quite done yet!
From those distribution transformers, again, there is a primary and a secondary coil in it. The primary coil is a complete loop between the previous transformer (the transmission transformer) and the secondary coil is a complete loop between the transformer and the building it is serving. As electricians, when we set a panel, we are simply putting it in the middle of that last loop! We don’t normally have the wires from the transformer going straight to the load, but rather have a panel in between the phases so we can control things and turn things on and off as needed. Again, electricity travels in loops, and once we understand that concept, things tend to become much clearer on how electricity works!
A closely related question would be what is the difference between the pole mounted transformers and the green pad mounted transformers we see in newer or higher end areas. The pole mounted transformer system is considerably cheaper and easier to install. Drill holes in the ground to slide the pole in, sling some wires in between the poles and voila! But you do end up with the unsightly poles/wires to be seen by everyone. The pad mounted type is much more pleasing to the eye but requires considerably more labor. The ground must be dug out or horizontally drilled, conduit must be installed, trenches must be backfilled and THEN the wire can be run in between. Much more pleasing to the eye. In addition, it also keeps the wire out of the effects of weather and away from the general population!
9 сен 2024