WHAT'S NEW in SketchUp 2024? (BIG RELEASE)

Подписаться 522 тыс.

Просмотров 57 тыс.

50% 1

The SketchUp 2024 release might be the BIGGEST release for SketchUp in recent history. Find out why!
LEARN SKETCHUP IN THE SKETCHUP ESSENTIALS COURSE
www.thesketchupessentials.com/...
BLOG POST AND RELEASE NOTES
blog.sketchup.com/article/unl...
help.sketchup.com/en/release-...
Want to Support the SketchUp Essentials?
/ thesketchupessentials
www.thesketchupessentials.com/...
MY SKETCHUP MODELING PC SETUP
kit.co/TheSketchUpEssentials/...
SKETCHUP BOOKS AND RESOURCES
kit.co/TheSketchUpEssentials/...
MY CURRENT FAVORITE SKETCHUP PLUGINS AND EXTENSIONS
kit.co/TheSketchUpEssentials/...
(Affiliate Links)
PLEASE LIKE AND SUBSCRIBE
Check Us Out On -
Website - www.thesketchupessentials.com
Twitter - / easysketchup
Facebook - / thesketchupessentials
Pinterest - / easysketchup
Disclaimers: all opinions are my own, sponsors are acknowledged. Product Links in the description are typically affiliate links that let you help support the channel at no extra cost.
TIMESTAMPS
0:00 - Introduction
0:11 - Full Release notes
0:44 - MASSIVE performance improvement (Graphics Engine Rebuild)
2:00 - Toggling the old and new graphics engines
2:37 - New Ambient Occlusion Style
4:17 - Share links to models without embedding
5:10 - Upgraded Add Location Feature
8:01 - New Layout Graphics Engine!
8:45 - Draft mode - MUCH faster navigation in Layout
10:35 - New Layout Inferencing
11:27 - Scan Essentials Ground Mesh
12:20 - Extension Error Dialog (HUGE Improvement)
14:25 - Toggle Move Grips and Ladder Lean Inference

Наука

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 178

@Thesketchupessentials 3 месяца назад

Hi everyone! Let me know what you think about this release in the comments below! :)

@DTP316 3 месяца назад

Pretty lame. Critical bugs. Check the forums.... really disappointing

@MrTahref 3 месяца назад

Speed update sounds nice. Just wish Sketchup had a option to buy their software..( I am the kind of person that only needs a upgrade once every 3 years)

@vaai_ltd 3 месяца назад

Been watching your videos a while now and finding im watching your work more than the sketchup channels which can get a bit salesy. This and other videos of yours are Straightforward and to the point, no BS, no sugar coating, huge amounts of valuable information about WHAT is important to each feature you present. Appreciative and thankful for the great content dude! Ill be sure to check out your course content

@Learnalot-vr1wq 3 месяца назад

Really glad they worked on the speed, thanks for making our work easier in knowing and understanding the new features

@Thesketchupessentials 3 месяца назад

Glad to help!

@colinholgate2804 3 месяца назад

For the ladder inferencing you would want to click on the corner that is going to touch the wall. Then when it rotates into place you get a new "From Radius" help tip.

@Thesketchupessentials 3 месяца назад

Thanks Colin - I clearly didn't have this one quite right :) - appreciate it!

@BrightmanDesigns 3 месяца назад

Thorough and insightful review as usual. Thanks for covering all the smaller features and updates too... There's a lot in there!

@Thesketchupessentials 3 месяца назад

Thanks dude - good work on yours as well! :)

@Ghost1152s 3 месяца назад

The ambient occlusion is a notch 👌

@Thesketchupessentials 3 месяца назад

It's pretty legit

@Thefrazzlee 2 месяца назад

Great video! How do I export the terrain and import in revit?

@anneinteriors1980 3 месяца назад

Hi, great. improvements! Can materials uploaded in SU 2023 be automatically transferred to SU 2024?

@johnwscarpenter 3 месяца назад

Very much appreciate the overview! Downloading v2024 now.

@Thesketchupessentials 3 месяца назад

You're gonna love it!

@colettepitu2418 3 месяца назад

Hi! Do you mind sharing what laptop you use please?

@askaraliarchitects5120 3 месяца назад

Watching you from years the way you start is out standing

@apertureworkshop 3 месяца назад

thanks for your great videos! I have noticed a 10x improvement in Layout speed!! I’m also curious if anyone has done the macos Sonoma upgrade and seen any issues…

@MelW913 3 месяца назад

Hi Justin, thanks for what you do! Can you comment on the feasibility of using SketchUp, (with Layout?) for drafting residential blueprints and creating Construction Docs? Are there shortcomings compared to Revit? Or can it be successful? Thanks for any insight.

@satriahanifrofi9798 3 месяца назад

Is there any mobile 3d app like sketchup out there? Currently my laptop can only use sketchup 2014, and my phone is Poco X6 pro. Any advice?

@terjehelmersen 3 месяца назад

Very nice! Regarding the ground mesh; I’m checking out photogrammetry with my drone. Does this mean you can import data from programs like meshroom or metashape, directly into SketchUp for further modelling?

@Thesketchupessentials 3 месяца назад

This I don't know - I'm not sure if Scan Essentials also has tools for lidar capture or photogrammetry or not

@ikagviz 3 месяца назад

I’ve checked this release notes page every day for over a month. So excited!

@Thesketchupessentials 3 месяца назад

Same!

@pratkbnsl 3 месяца назад

I just upgraded to SketchUp 2024, but I find the Ambient Occlusion setting is greyed out. Could this be because my Mac doesn't support the new graphics engine setting?

@Thesketchupessentials 3 месяца назад

I've not experienced this, so I'm not sure

@blacksheep_77 3 месяца назад

Looks like it's the SPEED update! Still waiting for Layout to give me control of Section Cuts at the viewport or by giving us Outliner control at the Sketchup Panel.

@Thesketchupessentials 3 месяца назад

I'm not sure you're going to see them move away from the current scene driven workflow any time soon, so I'd say these are probably less likely in the short term? Just a guess on my part, could be wrong

@erosvespasiani7929 3 месяца назад

Jitter option is disappeared from Style Setting - Edge Settings, why?

@mostlyelka350 3 месяца назад

Sketch up > Preferences, mine says "Open GL" instead of graphics, then the settings are reduced, any idea why this is? Thanks.

@bellousow2607 3 месяца назад

Very nice update really very good job

@Thesketchupessentials 3 месяца назад

Really excited for this one!

@shedever_designs 3 месяца назад

Does anyone know how to downsave from the 2024 to 2020 file? Please help

@md4uh 3 месяца назад

I have been using k key as a shortcut to initiate the label command in layout. will i now be forced to switch to another key?

@Thesketchupessentials 3 месяца назад

This I'm not sure about - I would assume you can change it in the shortcut manager

@bytecode5834 3 месяца назад

Thanks for the awesome video

@3DGvisuals 3 месяца назад

Yay finally! I normally roll my eyes whenever there's an update because of the pain of moving over to the new version, but the upgrades are too good to miss out on. There are a lot of plug ins that are needing to catch up though, so if you rely on them as part of your day to day process, then be wary before changing.

@Thesketchupessentials 3 месяца назад

True, though I was very happy with the performance of the new error dialogue in this case - I didn't get a bug splat, just an option to unload the extensions that were broken. Not sure if that's the case with every extension, but still a big improvement in my mind

@Moskeeto 3 месяца назад

Wow, it's about time they improved the real time rendering speed. I'm willing to upgrade ASAP but do you know if the Twinmotion Syncing extension still works with this version? Or will I have to wait for an update on that? Last time Twinmotion took quite a while to update their extension for 2023.

@Thesketchupessentials 3 месяца назад

This I don't know

@user-fc8ge3tw1t 3 месяца назад

I do interior rendering in SketchUp but it is so difficult because it becomes slower i hope that the update will fix it a little

@PalindromeDesign 3 месяца назад

Awesome upgrade and awesome preview. Nice work.

@Thesketchupessentials 3 месяца назад

Glad you liked it

@DTP316 3 месяца назад

Nope. It's as per every year's release with a ton of deal breaker level bugs

@florinapostoiu 3 месяца назад

@@DTP316 Right - so far 2020 - 2022 are the most stable versions, with 2022 on top.

@Thesketchupessentials 3 месяца назад

@@DTP316 What bugs specifically?

@lrisuchan2350 2 месяца назад

If I have the free Sketchup, can't I import 3D models? I've been trying for a while and it won't let me 😥

@showmak 3 месяца назад

Hi Justin, thanks for the video. Can you confirm if Enscape 3.5 is compatible with SU 2024?

@Thesketchupessentials 3 месяца назад

This I don't know - why wouldn't you use Enscape 4.0?

@showmak 3 месяца назад

@@Thesketchupessentials from what I read in enscape forum, version 4 is not stable yet and had some bugs.

@miro007ist 3 месяца назад

The Follow Me tool improved greatly. Ambient Occlusion is also a nice addition.

@Thesketchupessentials 3 месяца назад

What happened to the follow me tool?

@AtypicalWorkshop 3 месяца назад

Does this version work on Sonoma? I've had to use SketchUp 2017 for the last 6 months since updating my Mac Cheers :)

@Thesketchupessentials 3 месяца назад

Sorry, this one I don't know

@AtypicalWorkshop 3 месяца назад

@@Thesketchupessentials no worries - thanks for the reply :)

@cekuhnen 3 месяца назад

The improved graphic engine was way over due but no new modeling tools?

@AZIZXPX. 3 месяца назад

I think they are still working on importing PDF FbX OBJ Thank you for the clarification

@Thesketchupessentials 3 месяца назад

I don't think they touched these - you can now import USDZ and gLTF, but I don't think these others were added

@lsy88888 3 месяца назад

Although I already moved to 3dsmax since last year, it is still great to see SU to have significant nice updates! I personally feel that the draft view of the linework in Layout looks better other than having the dark lines overpowered the drawings. Not sure if Layout have the ability to set linework hierarchy. Looks like SU also decided to move toward to more 'BIM' oriented instead of wanting to be a easy hands on software. Would be interesting if they further release some features like clash detection etc.

@m-dlg9272 3 месяца назад

Is there still no native round bevel options with this update?

@Thesketchupessentials 3 месяца назад

Nope

@pibuz 3 месяца назад

I find this release to be the coolest since a very long time.! Got a little bit frustrated, though, while testing the rendering switch from raster to vector, which still appears to be cumbersome. Once switched, the navigation is very smoother now, on the other hand.

@Thesketchupessentials 3 месяца назад

Now that you mention it, this happened to me as well. Long initial switch, significantly faster after

@johnnizito 3 месяца назад

Why dont add some plugins like bevels and some others plugins that we always have to install, depends of a external plugin store for everything.

@ConnectedConstructionTech 3 месяца назад

We have to get you a scanner! Maybe we could get you one to test out up in Westminster.

@Thesketchupessentials 3 месяца назад

Ooh - that sounds fun! I've not been able to do much with Scan Essentials just due to lack of data at this point :)

@divyakarelia7251 2 месяца назад

YET TO TRY THE NEW VERSION HANKS FOR THE VIDEO UPDATE

@clementd6291 3 месяца назад

Hi, if you want, I can send you a point cloud of the inside of a studio that I am currently working on in Paris. Thank you for your videos, have a great day.

@JoneRogan402 3 месяца назад

Congratulations! Acceleration of this software done!🎉🎉🎉

@Thesketchupessentials 3 месяца назад

LOL - Big improvement for sure!

@dwiranu5394 3 месяца назад

Is there any improvement in terms of file size in layout?

@Thesketchupessentials 3 месяца назад

I didn't see anything specifically mentioned

@jonm7197 2 месяца назад

Things there just work WORSE now.

@rdvizstudio 3 месяца назад

I tried the trail version, and i came across a big nerf, which was geolocation where for trail not even a small house size area is able to import. I'm really disappointed by that otherwise its really nice update

@Messi10billy 3 месяца назад

The funny thing i found, kind hard for me to find the side scroll bar 😁

@dinuionescu1779 3 месяца назад

Hi, why don't they correct the problem that appeared in 2023 with trimming of solids? You can not trim multiple solids with a first one as in 2022 version, it s so time consuming

@Thesketchupessentials 3 месяца назад

I'm not sure what the specific issue is - I don't think you've ever been able to trim multiple solids at once unless you group all the solid geometry into a single solid group and trim that way

@dinuionescu1779 3 месяца назад

@@Thesketchupessentials In 2022 version if you pick the first object and trim one by one the other objects, you don t have to enter trimming command for every trimmed object ( the first object remains active as the cutting one). In 2023 and 2024 after you trim one time it exits command, you have to enter trim command again, and so on. Let s say we have a main beam and 10 perpendicular secondary beams on the main one, intersecting it. Please try to trim the 10 beams in 2022 version and then in 2024, the time is at least double.

@florinapostoiu 3 месяца назад

@@Thesketchupessentials You can, with a Thailandese extension called ExtensionLab (and maybe also with BoolTools)

@marjolein_pas 3 месяца назад

Realy need better snapping for Layouts, that would be amazing and a competition killer

@bong5079 3 месяца назад

i wanted to see more useful tools for layout, becuase this is the main tool for documentation.

@belcofnet 3 месяца назад

Спасибо за видео урок, как всегда замечательно!

@chrislambe400 Месяц назад

Is it faster now without a 2000 USD graphics card? Where is the before comparison? Is it faster now using my crappy intel integrated laptop graphics Intel Iris Xe?

@cptbaku6310 13 дней назад

sketchup is now only missing the uv mapping function

@lucasoliveira475 3 месяца назад

Ambient occlusion 🙏🙏🙏🙏🙏

@Thesketchupessentials 3 месяца назад

Actually creates some really cool images :)

@richiee13 3 месяца назад

Awesome update, I’m glad they enhanced the performance, because sometimes its annoying when skp gets slow with big projects. And now, I feel like they made it more bearable😂

@Thesketchupessentials 3 месяца назад

LOL - fair

@AdamGrant-sp4bf 3 месяца назад

The real question, will Layout keep crashing every 5minutes on my MacBook?

@Thesketchupessentials 3 месяца назад

No clue

@vmurad 3 месяца назад

Finally a SKP update that did more than just replacing the human figure in the template!

@Thesketchupessentials 3 месяца назад

Slight hyperbole :)

@aliwalid5 3 месяца назад

Why does SketchUp 2024 not accept Enscape installation?

@DEPICTIONILLUSTRATION 3 месяца назад

SketchUp 2024! Love it!

@Thesketchupessentials 3 месяца назад

@vaai_ltd 3 месяца назад

Lol ive had so so many crashes in the earliest versions of layout i still save often even in these newer versions 😂

@Javier-ss7jg 3 месяца назад

Still no built in bevel tool? :(

@Thesketchupessentials 3 месяца назад

@asd-fw7yb 3 месяца назад

I bought the new Sketchup 2024 and it is very good! . BUT! - if someone had any plugins on earlier versions of SU, these plugins will usually no longer work in the new version of SU 2024 and you have to pay (if you have paid plugins) and install them again. The new version of SU 2024 is very sensitive to old plugins and rejects them. you only need to install plugins that are adapted to SU 2024, otherwise they will not work. (there are some plugins that still work with SU 2024, but there are very few of them, such as 1001bit) which is a pity.

@avicohen2k 3 месяца назад

Yup, new better engine is at the top of the wish list. Doesn't seem that much faster, Imwish it was 3ds max level where much larger files would be much soomther.. Number 2 is a external reference system, to have an external model embedded in a current model.

@Thesketchupessentials 3 месяца назад

What did you test it on? In my viewport it's like...noticeably faster on large models as soon as you open them up

@mwave5642 3 месяца назад

Hi Justin, a very important aspect that i have notice, at least for me it was the one that Sketchup 2024 was running very slow, very slow also compared with the 2023 version and i wanted to stay on the 2023 version, after deciding after all to go with the 2024 version and uninstaling 2023 version it was a wooow, Sketchup 2024 was realy boosting, maybe the new render engine got a conflict with the 2023 version at least for me i am sure, maybe it will help others as well, now i am happy with the new version, of course lot of plugins with problems also but positive that the developers will fix them

@Thesketchupessentials 3 месяца назад

SketchUp 2024 wasn't faster for you until you uninstalled 2023?

@mwave5642 3 месяца назад

@@Thesketchupessentials yes, exactly, sketchup 2024 was lagging and 2023 had no lagging on the same model, it was much much worst on 2024, but after uninstaling sketchup 2023, sketchup 2024 new render engine started to go on his potential and it is realy faster now

@plummetplum 3 месяца назад

Does Sketchup Free get an upgrade or not?

@mikrobus72 2 месяца назад

Thank You for video! From Russia.

@kyleb4327 3 месяца назад

Was waiting for a SketchUp free addition of the ability to import an SVG and nothin.. such a bummer.

@ShomitSarkar 3 месяца назад

Too bad the add Location feature now belongs to the subscription users :(

@Thesketchupessentials 3 месяца назад

The free version has add location, but it doesn't have terrain I don't think

@WakeUpToReality125 3 месяца назад

Great

@Thesketchupessentials 3 месяца назад

I'm liking it :)

@dpgedward5947 3 месяца назад

Not much new that is going to make much difference. so still sticking with 2021

@Thesketchupessentials 3 месяца назад

I suppose if your models aren't big enough that they ever slow down, it's maybe not a ton of new features? Performance has been the #1 thing that I've heard people struggle with online, so for most users this is a BIG release

@ryanalbracht2308 3 месяца назад

Agreed. This update is bigger than most sketchup updates but it is still falling behind most modeling software. Needs procedural and non destructive workflows

@aggros2011 Месяц назад

Still no multicore ?

@Thesketchupessentials Месяц назад

No 3D modeling program that I am aware of uses multicore for modeling applications. It's used for rendering, and since SketchUp doesn't have a rendering engine built in, there's really no place where SketchUp could really utilize multicore - forums.sketchup.com/t/cpus-and-multithreading/88109

@danieleb588 3 месяца назад

AO es massive!!!!

@Thesketchupessentials 3 месяца назад

It's a big one!

@fadilvi 3 месяца назад

I wonder they just half assed to develop it ? Why no dark theme too Also some plugin need update ,if you decide to use this version of sketchup

@Thesketchupessentials 3 месяца назад

How is rewriting the entire graphical engine for significantly better performance "half assed developing"? And you ALWAYS have to update plugins, with ANY new program release unless they literally change nothing

@fadilvi 3 месяца назад

@@Thesketchupessentials let see...qt development already years back , and i believe most of those graphical engine depends on qt, and it only released today? And while we know how sketchup work and depends on plugins , why not integrated it using their own way,like pull push support group, i believe it can be done easily, and talk about dark ui I believe its now part of daily necessity for designer who spend hours in front of monitor, it can integrated easily with qt , sketchup can do xref -ing but its not featured, layout save is still slow because the file size is the same or bigger than sketchup files..its need to be resolved... basically 'the half assed work' that i mean is this kind of thing. Thats way i called it half assed work. You look at blender , theres always change n new tool, but you look at sketchup from su-6 to 2024, its all almost same. Still need many plugins to work efficiently. Sketchup used in wide variety of field, but it never adapt to the need of those who work with it ,n only support minimal tools. Only using plugins you can work faster n efficient.

@Creathrod 19 дней назад

👍🏿👊🏿

@robertwilliams2762 3 месяца назад

Dark mode?

@Thesketchupessentials 3 месяца назад

Not in this release

@kroolintentions182 3 месяца назад

Jeez... I still use Sketchup Make 2017.

@joeyyahya 2 месяца назад

WHAT’S UP GUYS 😂

@AD-Dom 3 месяца назад

FINALLY. Truly frustrating handling of large files. City massings used to be the WORST!

@Thesketchupessentials 3 месяца назад

This should be a significant improvement!

@Skans-Gustav 3 месяца назад

I think Undet fo SketchUp is better than Scan Essentials.

@Thesketchupessentials 3 месяца назад

I've not really used either, so I guess I don't have an opinion on this one

@Bleepurchin 3 месяца назад

As someone who has used 3D modelling software for over 15 years, this piece of software is SHOCKING. It’s like the developers are living in a cave and under a rock. Determined to remain in 1995 using windows XP. How is this an industry standard??

@Thesketchupessentials 3 месяца назад

And yet here you are, watching videos about it and commenting 🤣

@Bleepurchin 3 месяца назад

@@Thesketchupessentials I have to work along side people who use this software so I am ever hopeful that the program will make a leap forward with each release but it falls short every time. That is just a fact sir. That said, I think your channel is a great resource for those using the program…

@Thesketchupessentials 3 месяца назад

@@Bleepurchin I appreciate this - there are also things that I hope are added, and I'm not sure why they aren't. I don't really agree that this particular release falls short (I'm happy as it solves probably the biggest problem most people complain about, performance), but I would hope to see a focus on some of these more standard features in the future.

@calebfrost6195 2 месяца назад

@Bleepurchin, what 3D software do you use or recommend. I've hd similar thoughts although I use sketch up.

@Bleepurchin 2 месяца назад

@@calebfrost6195 I’ve always used Cinema 4D for most of my work. However, looking at the landscape now, I would recommend Blender. It’s got a comprehensive user interface, easy to use modelling tools with a far greater range of capabilities than sketchup. It’s open source and free to use. A great move for anyone looking to advance their 3D skills.

@JeanToga 3 месяца назад

Still no Native Bevel huh

@Thesketchupessentials 3 месяца назад

I suppose re-writing the entire graphical engine for 8x better performance took priority

@tulisan1041 Месяц назад

SketchUp - let's create a useless feature: Import Revit into SketchUp.

@bellousow2607 3 месяца назад

#sketchUp

@LibertyFabrication 3 месяца назад

Compared with modern games the graphics performance is still an absolute joke.

@sirrodneyffing1 3 месяца назад

Shadows slow? So how come I can get real time everything in Blender EV, but hey, wow..a bit of speed increase and very basic ambiant occlusion is SU after waiting years; very lazy dev team at Trimble.

@Thesketchupessentials 3 месяца назад

Feel free - I love Blender. That said, sometimes I like working with a program that has an actual line tool 😎

@sirrodneyffing1 3 месяца назад

@@Thesketchupessentials I've used Sketchup for Architecture for 10 years..its hardly progressed at all, the plugins, many of which are superb, are what keep it going. The actual application gets little more than tweaks. Switching over to Plasticity day by day where possible.

@Thesketchupessentials 3 месяца назад

@@sirrodneyffing1 Don't think I've ever seen anyone using Plasticity for architectural modeling - most everything I see is product stuff. Interested to see how that's working for you

@jonm7197 2 месяца назад

With every "update, simple things that you were used to NO LONGER work as well. Measure tool turns on guides now. Why.... Split screen Bug splats on me. Why... dual monitor INSIST on drop down menus showing on opposite monitor. Why.... Oh, and Osnaps work WORSE than previous versions of Layout. Why...

@Thesketchupessentials 2 месяца назад

I can't speak to the bug splats, though I would suspect this is all having to do with graphics card and drivers. I'd recommend switching it to the classic engine and seeing if that helps at all. The tape measure tool has always created guides though. Snaps in Layout is weird - Brightman did a video on that - seemed like an odd change

@edisonpalomo115 3 месяца назад

Por fin, luego de años esperando cambios relevantes en el software, lograron darnos avances importantes.

@Fiskyaz 3 месяца назад

@Thesketchupessentials 3 месяца назад

@ibrahimakca8628 3 месяца назад

Bu program gereksiz kasıyor sahne dolunca PC iyi olmasına rağmen

@join2go 3 месяца назад

SU 2023 is where us non paying leachers are going to stay. No map or location for non payed version of SU 2024.

@eugenn2848 3 месяца назад

Can't believe they haven't added the trackpad gestures yet. Such a disappointment!

@Thesketchupessentials 3 месяца назад

Just as a general rule I think most people would recommend getting and using a mouse. Trackpad isn't really standard for ANY 3D software I've seen

@eugenn2848 3 месяца назад

@@Thesketchupessentials You sound like an apologist. The web version features support for trackpad gestures, and they work very well. It's incredibly convenient to have this feature when being away from home or the workplace. Why they desktop Pro version shouldn't have it as well?

@Thesketchupessentials 3 месяца назад

@@eugenn2848 I'm not sure why calling names is necessary. Every piece of instruction I've ever seen usually recommends using a 3 button mouse with a scroll wheel as it's significantly faster and easier to use. As such, trackpad features are probably lower priority to the dev team (I would assume). I can't speak to why it wouldn't be in the desktop version when it is in the free version. It looks like you've been active in the SketchUp forum saying this same thing, so maybe someone from the dev team will see your post?

@ignorante.promedio 3 месяца назад

finally ambient occlusion LOL, hope they add more shaders to play

@Thesketchupessentials 3 месяца назад

I really like the way the Ambient Occlusion results look

@DTP316 3 месяца назад

Full of bugs as usual

@Thesketchupessentials 3 месяца назад

It's usually a good idea to keep the last year's version in addition to installing the new one while they work stuff like this out. Every update of every software introduces some bugs, and I'm sure re-writing the engine probably has more implications then a regular release.

@animatedadam 3 месяца назад

I'm finding this too. I'll keep to the old one for a while until its fixed

@nathanrichards7930 3 месяца назад

Takes more ram when dealing with large projects too, especially when meeting the minimum requirement for ram (8 gb)

@CStoph1979 2 месяца назад

Do all my plugins break again? They arent designed for 2024 I used software 30 years ago that let you move vertices, but not sketchup!

@Thesketchupessentials 2 месяца назад

Depends on the plugins you're using and if they're compatible, if the developer needs to update them so they work, etc. This is pretty normal across all 3D software, not limited to SketchUp. As to moving vertices, SketchUp isn't really built around modeling with vertices, but rather with faces. That was kind of the original "point" of SketchUp was to simplify modeling to the point that you drew a face, and extruded it. While it might preclude some more advanced modeling, it also makes SketchUp significantly easier for beginners to use as opposed to something like Blender.

@CStoph1979 2 месяца назад

@@Thesketchupessentials Totally disagree. Sketchup makes outside developers create tools for free, that break every update and require you to pay again to get them. Simple things like moving vertexes, you have to pay extra for. And pay every time sketchup updates. What other 3d software gives you a version that forces outside developers to make it useable? Pretty normal? Across ALL 3d software? LOL 20+ years ago, every 3d software was full featured, let you move vertices, etc... Sketchup - NOT EVEN FUCKING CLOSE

@Thesketchupessentials 2 месяца назад

@@CStoph1979 You're conflating two different statements. Plugins/extensions break sometimes across pretty much all 3D software when new versions are rolled out. This happens with SketchUp new releases, Blender new releases, Rhino new releases. It's something that will ALWAYS happen on platforms that allow third party add-ons, because the main software update usually precedes those developers being able to update their extensions, so things break. As to the rest of your comments (vertex editing, etc) - like I said, SketchUp is designed to model in a different way. It might work for you, it might not. If it doesn't, you can use something else. That's the benefit of having other options, and I encourage everyone to find the 3D software that meets their needs. Good luck!

@CStoph1979 2 месяца назад

@@Thesketchupessentials You guys purposefully make your software crap so other people have to make it useful for you, for free! Then update every 2 years, cant even add a dark mode, and all the plugins break, and you have to hope there is a new version when many times there are not. Your software is so bad that you cant even give your users the ability to move vertices without paying extra every update. There is no other software out there that gives its users so little. 3d MAX, LIGHTWAVE, MAYA, every 3d software until you guys came out had basic functions you cant seem to add. Blender is feature filled. You are featureless. And blender is FREE! I never knew it was a feature to give your users less. I guess that comes from being created by google.

@CStoph1979 2 месяца назад

@@Thesketchupessentials Actually, its complete shit that your software has the ability to move vertices, yet you keep that feature out of your software, and force someone to write the code for you, then force your users to pay for it every two years when you release another version. But excuses are cool.