Wheel Balancing - Using a Manual Static Bubble Balancer

Подписаться 15 тыс.

Просмотров 77 тыс.

50% 1

[Parts]
Static Bubble Wheel Balancer (CHEAPEST): amzn.to/3kONaor
Stick-On Wheel Weights (BEST VALUE): amzn.to/3dag6Ey
Clip-On Rim Wheel Weights: amzn.to/3qosR22
CKAuto Wheel Balancing Weight Plier Hammer Tool: amzn.to/3jQI3Cq
ALSO:
How to MOUNT Tires with a Manual Tire Changer !! EASY !! (Harbor Freight and more)
• How to MOUNT Tires wit...
Wheel Balancing - Using a Manual Static Bubble Balancer
WATCH THE OTHER VIDEOS ON MY CHANNEL!!! I REPLACE: TIE RODS, LOWER BALL JOINTS, CV AXLES, SWAY BAR LINKS AND MORE!!!
SUBSCRIBE FOR MORE!
#WheelBalancing #TireBalancing #ManualTireBalancer
----
Video Title: Wheel Balancing - Using a Manual Static Bubble Balancer
Video File Created Date: Wednesday, 14 October, 2020 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using RU-vid Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your RU-vid videos offline... Then upload!
-- ginkosolutions.com/youtube-bul...
-- GinkoSolutions.com
Video Tags:
wheel, balancing, using, manual, static, bubble, balancer, wheel balancing, wheel balancing explained, wheel balancing and alignment, wheel balancing vs wheel alignment, wheel balancing weights, wheel balancing sticky weights, wheel balancing at home, wheel balancing symptoms, wheel balancing noise, bubble balancer, bubble balancer harbor freight, bubble balancer accuracy, bubble balancer for tires, bubble balancer for car tires, bubble balancer any good, harbor freight

Авто/Мото

Опубликовано:

17 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@TutorialGenius 3 года назад

Like and subscribe for more! All parts, tools and more information in the video description. If this video helped you, please support the channel here: ko-fi.com/tutorialgenius Thanks for watching! ALSO: How to MOUNT Tires with a Manual Tire Changer !! EASY !! (Harbor Freight and more) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6NnY4vn88xU.html

@rrice1705 2 года назад

Very nice. I like the way you triple-check where the "light" side of the wheel is.

@anthonydargenio3536 2 года назад

Great job splaining the whole ball of wax this is what we did before dynamic balancing and it works just as well unless u r traveling at speeds over 100 MPH

@keyboardwarrior2812 2 года назад

really good and well explained Best video I’ve ever seen on this. Very thorough.

@tjslbfyt98 3 года назад

Thanks so! Best video I’ve ever seen on this. Very thorough. Great job! God bless 🙏🏾✝️

@FaithisKey792 Год назад

Amazing. Thank you and God bless you.

@carlyleroberts3995 Год назад

Excellent video. Perfectly explained!

@TookMe20min2findThis 2 года назад

Excellent video. Thanks.

@workharddieproud Год назад

Awesome instructions, Thank You !!

@TutorialGenius Год назад

You're welcome! I hope you will subscribe to me soon!

@fredblankenship2319 5 месяцев назад

thank you so much for such a fine explanation on how to use this tool,

@TutorialGenius 5 месяцев назад

You're very welcome!

@TheJosa007 9 месяцев назад

Thank you very much for the good explanation!

@TutorialGenius 9 месяцев назад

You are welcome! Glad it was helpful!

@TeslaFSDStudent Год назад

Very well explained with all necessary details we need to proper balance the wheel. Thank you for the video 👍

@VinnyOrzechowski 3 года назад

very helpful

@OldSchoolNoe Год назад

I did not know, very cool!

@timphung4431 7 месяцев назад

You are the best. Thank you

@TutorialGenius 7 месяцев назад

Happy to help! Thanks for watching! :)

@MarioLT4 4 месяца назад

Great job.

@TutorialGenius 4 месяца назад

Thank you! Cheers! :)

@newblue41 Год назад

There is a strobe light balance method to balance the wheel while it is on the car itself... the point is to balance the effects of the brake rotars... I had a BMW c a problem of vibration and this helped to cancel out vibrations of wheels to point to another problem...the rear driveshaft was also out of balance.

@TutorialGenius Год назад

This method is very unreliable though. I wouldnt recommend it to anybody

@garymahon1955 5 месяцев назад

Thanks much for this informative video. I just ordered one of them, and i see you also have a manual tire changer, like i just bought 10 days ago. We can surely save money with these things.

@TutorialGenius 5 месяцев назад

Glad I could help! Hope you have a great new year!

@tommccully2109 10 месяцев назад

Great video. Thanks

@TutorialGenius 10 месяцев назад

You are welcome!

@kingstonzincfence Год назад

Great job at explaining balancing. Even better than Scotty K and that says a lot!

@TutorialGenius 11 месяцев назад

I appreciate that!

@steveriley1000 Год назад

I seen something years ago about static balancing, and your not supposed to balance the tire 180 degrees from the heavy spot . You should use a Y pattern. Same technique but move your weights away from the balance point until you get a Y pattern and it will help keep the tire in balance longer as the balance points will be triangular on the tire in 3 points . Great video on the whole setup to checking everything. Try one with the Y pattern and do un updated video on that would be cool too .

@TutorialGenius Год назад

It's a theory for sure but spinning and checking does pretty much the same thing. Do a video and link me to it when you're done. ill see

@steveriley1000 Год назад

@@TutorialGenius , I may have not said it correctly, put the weights on the rim in a Y pattern from the heavy spots . Not in the verifying of the out of balance. That was truly great presentation in your video. I don’t have one of these balance machines but may have to look into it for my trailer tires .

@MileytheJeepV2 11 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w_mH9qCceMA.html this is what hes talking about. Yesterday i tried it the same way you did and i still had shaky tires. Today i tried the way in this video and the shake is gone

@roadassassin9445 Год назад

Does it work on motorcycle tires as well

@ItsFriscoBaby Год назад

A motorcycle balancer is even easier to use than these. It's just a level pole and you let the heavy part go to the bottom. Works so well motogp teams use it

@daves2433 3 месяца назад

No mention of repositioning the wheel on the balancer to make sure it wasn't sitting crooked? I do that along with the rotate and let it stop a few times to make sure the bubble is pointing in the same direction like you described. Once in a while it may not sit quite centered... like if there's junk on the wheel center / bolt face.

@TutorialGenius 3 месяца назад

It's not a bad idea, sure :) Hope the video as useful!

@daves2433 3 месяца назад

Yes it was, always good to see an instructional video that's done well.

@Tommy.McLean Год назад

What's the largest rim size you can do on these?

@TutorialGenius Год назад

I have done 19", it was fine, no problems. Anything more, well, let me know how that goes! :) I hope you subscribe to my channel soon!

@Tommy.McLean Год назад

Thanks for the reply. Subscribing time now. I'm going to try a 20 🤞

@dineshgurung9391 4 месяца назад

Did you modify the tips of the balancer

@TutorialGenius 4 месяца назад

Not I didn't! But I would 100% check if the tip is smooth and pointy!

@daves2433 3 месяца назад

I had to midify mine, there was a ~1/8" hole that didn't actually contact the tip of the base, it was a ring around it. That ring made it far less sensitive and sticky, even with grease on it.

@TutorialGenius 3 месяца назад

I think some of these aren't made too precisely! Mine was fine, but my neighbors was how you describe!@@daves2433

@stevenb_4202 4 месяца назад

Could I do this on a 15x10 rim?

@TutorialGenius 4 месяца назад

A 15" rim, i dont see why not

@stevenb_4202 4 месяца назад

@@TutorialGenius even if it’s 10 wide? And where would I place my sticky weights at it’s my first that I’d be doing it

@Renosapien 9 месяцев назад

If you have aftermarket rims they are most likely only going to get static balanced because you won’t be putting weights on the outside of the rim. Only the inside. How many people have aftermarket rims and never have any problems? Those are my thoughts at least.

@TutorialGenius 9 месяцев назад

Not necessarily! They can have slight imbalances straight out of the factory. This can also change if you hit a curb or anything to upset the natural balance of the wheel. It's not just weights that change the balance and its not aftermarket vs OEM which denote where the weights go

@catdaddy3728 2 года назад

First video I ever heard someone say NOT to remove all weights first! That is what I think too... See where you are first. Question though, when you find balance is off, with original weights on, why not add weight to bring it into balance without removing all weights and starting fresh? May not have had to add as much fresh weights. Very good video though, explained well! If you see this, could you answer as to why not just add to wheel already with weights on? Thanks!!

@TutorialGenius 2 года назад

Yes, you could. There is not really a right or wrong answer. If the balance is off though, and you have weights on then you might as wel remove them. 1. Aesthetics. Nobody wants a wheel full of weights (applies to clip on's). 2. Its just more weights to lose when driving, they can fly off. 3. Well you have the tools already, might as well do it properly. Seems like a bit of a hack job. but back to the start, it doesnt really matter, choice if yours, but i always like doing a proper job.

@catdaddy3728 2 года назад

@@TutorialGenius Very cool, makes sense! Thanks for the answer!!

@pablojimenez5736 2 года назад

Static balancing doesn't guarantee the wheel will remain balanced when rotating...so what the point to gamble with the balancing? I guess the only advantage of static balancing portable machine is check if basic wheel balancing is still in your wheels, but not a final balancing. For correct balancing, is necessary to balance in a machine of dynamic balancing

@anthonydargenio3536 2 года назад

Before dynamic balancing this is what we did and it works just as well unless u r traveling at 100 MPH

@mymorristribe 2 года назад

I started researching this after treadwright tires recommended static balancing. I've had dynamic balancing done twice on my truck, but I still get the freeway jitters at 80mph, so I thought I'd try this "after" and in addition to the already completed dynamic balancing. If this doesn't work, I'll know those tires just suck.

@alaingillot4718 Год назад

Have been balancing using a more pro bubble balancer for decades with zero issues .properly done with the harbor freight should work fine .

@peggyseefeldt2638 Год назад

I guess static is better than nothing at all.

@curryhousechicken 21 день назад

This shit does not work. The reading is always off if you put the wheel back on the balancer after balancing.

@TutorialGenius 21 день назад

Is the needle pointy without defects? and have you added any grease? maybe its getting hung up

@curryhousechicken 21 день назад

@@TutorialGenius …I have widened the hole where the needle goes in like everyone has done. The cone is sitting on it freely. Have you tried putting the wheel back on the balancer after you have balanced it? Do you get consistent reading?

@TutorialGenius 21 день назад

@@curryhousechicken Yes, it works really well for me, thats why I decided to make this video. Did you bolt it into the floor so that its very sturdy and doesnt move?

@curryhousechicken 21 день назад

@@TutorialGenius …maybe I didn’t tighten enough the shaft to the base

@charlesmckenzie7101 Месяц назад

it works good , but this is a static balance, not a dynamic balance, with wheel moving, plus it doesnt account for road force vibration. So, its a decent, but not perfect balance.

@TutorialGenius Месяц назад

You literally just copied what I said in the video, without watching the video. I don't understand some people!

@johnsmith-qp3xw 2 года назад

work perfectly until you mount on a car ,

@TutorialGenius 2 года назад

I mentioned about this in the video already. For anybody else that missed this part: This is a static balance with a static balancing tool. This does not dynamically balance (IF a dynamic balance is required)

@peggyseefeldt2638 Год назад

Then the moment of truth.