When to [un]Focus Your Laser

Подписаться 92 тыс.

Просмотров 28 тыс.

50% 1

🔗 Plans & Laser Cut Files: samcraft.shop 🔗 xTool D1 Pro Gridboard: samcraft.shop/... 🔗 My xTool Creative Space Test File: samcraft.shop/... 🔗 Lightburn Version Test File Package: samcraft.shop/...
⬇️ MORE LINKS BELOW ⬇️
🎉 xTool FATHER'S DAY SPECIAL SALE!!!🎉
xTool P2 - The Smartest CO2 Laser Cutter(Save $$$ this Father's Day):
🇺🇸 US: www.xtool.com/...
🇬🇧 UK: uk.xtool.com/p...
xTool F1-Fastest Laser For Craft Show DIY(Save $$$ this Father's Day):
🇺🇸 US: www.xtool.com/...
🇬🇧 UK: uk.xtool.com/p...
xTool D1 Pro - Cash-in Laser Machine(Save $$$ this Father's Day):
🇺🇸 US: www.xtool.com/...
🇬🇧 UK: uk.xtool.com/p...
🔗 REAL Laser Safety Glasses: amzn.to/3YlhAAN (Diode & Infrared) amzn.to/3FtkbjP (CO2)
🔗 All my Laser Videos: • Laser Engraving Business
🔗 Make Money Woodworking Videos: • Making Money from Wood...
🔗 Our Family's Small Business: greenacrehomest...
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
Today on Samcraft I talk about when it is best to purposely un-focus or de-focus your laser. This easy test may be the key to getting better results from your laser. This test works on all diode, infrared, CO2, and fiber lasers!
#laserengraving #samcraft #xtool #diodelaser #laserengraver #smallbusiness #sidehustle #tipsandtricks #smallworkshop #maker #makerspace #ortur #atomstack #roly #rolylaser #co2laser #fiberlaser
*DISCLAIMER*
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@JuliaRusso-vg7sy Год назад

I can't sit quietly and enjoy your videos anymore--have to step up and give you a shout out for all the generosity of instruction. And a Southern boy too. Thanks from South Carolina--keep 'em coming!

@air12345567 Месяц назад

Thanks for the tutorial on this. I haven't tried coasters yet. I hope I get good results on my P2. Great information.

@guybowers9094 Год назад

Great test to do, and I always enjoy seeing the outcome of the project. It looks like 3 is pretty good, but 6 appears to have a slightly sharper image.

@geraldlamothe6091 Год назад

Here is a pro tip that I have been doing for over 2 years.I started like you with an Ortur...Get yourself a z-axis height adjuster,and adjust your focus manually..In other words you need to eyeball it with the laser dot...First you put a piece of flat black cardstock over the piece you need to engrave or cut,press fire button in lightburn and you will see your laser dot.Now with the z axis adjuster you can pinpoint the size of that dot to it's smallest...I guarantee you will never adjust any other way because, you will have better engravings and faster cuts.Also when doing fire mode in lightburn everything below 5% there is no problem ,I mostly leave it a 3%... Last thing, by doing this you need to get rid of that shield...Also if you want the most perfect dot, use a microscope you can get them cheap on Amazon...If you want perfection, this is the best way...

@otakelblanchemanor0659 Год назад

Agree. When it started on the 3m level, I could tell a difference, it was 'crisper' looking, same with 6... but 9 was just a bit 'fuzzier' looking. Just my observation.

@TheLouisianaHobbyGuy Год назад

*Great video Sam!* I always defocus slate and stone by 5mm. This method works really well on photos as well.

@Samcraftcom Год назад

Great to hear! Photos are a realm I have not ventured into yet!

@mattsara2802 Год назад

😂🤣😂🤣 when you tossed it up my heart stopped.

@Samcraftcom Год назад

Yeah, it was def. a lucky catch!

@georgesavage3482 Год назад

Thanks Sam! D1 Pro 20W… Used 1500 mm/min and 50% power at 4mm above focus. Can’t wait for your coaster grid to come out

@Samcraftcom Год назад

It should be available very soon. The Lightburn design is done, just need to re-hash the base mounting then film it all.

@composter1 Год назад

when your kick stand is down instead of trying to lift it and possibly mark your work, just slide gantry to the right and then lift your kick stand. This way it is not scratching backwards but walking away with no mark.

@PuppetWood 7 месяцев назад

Never thought to try this. Thanks!

@bonniehollingsworth1996 Год назад

Completely agree, Sam! 3 - 6 is absolutely best.

@tommodica4165 Год назад

I have the OLM2 and just upgraded the laser module to the 20w. For me it was cheaper than getting a new machine. Definitely increased my speeds

@kathycortez232 Год назад

Engraving always make something very pretty. I want to order me some. I love your videos they’re always so inspiring. Thank you for sharing. Hugs and prayers much love. Oh and much love to my Angela I know she’s hard-working too

@margiebrown7436 Год назад

On camera 3 looks the best to me. 😊

@chrismckenney4391 Год назад

I have really noticed this with my ortur LM2 pro as well when engraving walnut charcuterie boards, I raise the focus point by a little bit like that from factory and I get a much better engraving!

@Seven_Craig Год назад

To me it looks like 6mm is the clearest test run. Nice work!

@mrsdizi1234 4 месяца назад

Thank you, you are amazing straight to the point and very clear, Question If I find my sweet spot using the jigs as I had to go up to the 9mm. Does that require me to put the jig in everytime I engrave,? also does this work for the cut focus as well? Thank you

@tomsmales3696 Год назад

Great videos Sam. Only found your site recently. Wish i had found it earlier it would have saved me a lot of headaches. So far you seem to have the answers to most of my questions. No one seems to talk about the how-to and why about laser focus, instead of just using the mfgs settings. Have you done anything with glazed ceramic tiles? I would love to see something about your process. Thanks again for the videos.

@dl5244 Год назад

6:15 Nice

@johnkubisky5618 Год назад

Great test, i do the same - between 3 and 6 - thanks for the info.

@Samcraftcom Год назад

Glad it was helpful!

@boruchlen 7 месяцев назад

Great video as usual! Thank you!

@customartbyt 6 месяцев назад

Hello Sam. Just found your channel today and have spent quite a bit of time watching some of your laser videos. I really like your presentation method. I am new to the whole laser scene, just bought an Xtool D1 10 watt machine and haven’t used it yet, been working on projects with the CNC. Question, how do you set the XCS software up for engraving multiple items at the same time? I figured you would have to do 1 at a time unless you were cutting them out of a single piece of material?

@DWIT3D Год назад

Wow, great timing. My D1 Pro is arriving today, and I have coaster orders… thanks for making this video! Question… How necessary is it to ventilate when burning coasters? I need to bring my production into my basement when the weather turns. Thanks Sam.

@GrandOldDwarf Год назад

Looks like the 3mm looks best on camera

@stevengriggs9748 Год назад

Found my D1 on slate looks the best at 5mm defocused, fun to test, great vid!!

@mikepetitt9624 Год назад

That’s cool really never thought about setting off zero. But ya 6 looks the best to me

@blondefoxcreations Год назад

Very interesting. I am going to have to try this test with mine as well. Thanks!

@terryh5677 Год назад

Another great lesson. Thanks again Sam.

@Samcraftcom Год назад

My pleasure!

@onsapplikasies8620 Год назад

Interesting. Did not think it would work that well. Now I need to try it 😉

@chloesmom412 Год назад

3 is favorite

@StumblingBumblingIdiot Год назад

Would be neat to compare this output with a ramp test focusing result and see if the ramp test gets you spot on. Great videos, keep em coming!

@georgewilmore7599 Год назад

Awesome explanation I’m getting ready to do coasters. Nice tips for me to take in consideration.

@Samcraftcom Год назад

Glad it was helpful!

@LYTOMIZE_Woodshop Год назад

Nice catch! 🫣

@sharksys Год назад

I vote 3

@deannaoverstreet4146 Год назад

Thank you Sam!

@angelacross2216 Год назад

Thanks Sam.

@eh3237 11 месяцев назад

Great video Sam! Like all of your videos. Question, do you put any spray coat on the slate before or after the engraving?

@rightpassage Год назад

If I'm correct? I do believe the lever on the right is for defocusing. I had it up once and ran a job before I realized it.

@Samcraftcom Год назад

Correct, that is for cutting and moving the focal point. I keep mine at the 0 point most all the time since I cut on a CO2 laser. I checked today and it's still set to 0. :)

@terryclair2914 Год назад

Thanks Sam great video!

@telecasterbear Год назад

Thanks Sam. I am most comfortable in the real world.

@StanG1980 11 месяцев назад

What number on the side of the laser should it be on

@brette166 Год назад

Hi Sam. Are you using the 20watt? And if so, what are your settings? They look great!

@Samcraftcom Год назад

I knew someone would be asking. :) Yes, 20w. I ran these at 250 mm/s 50% power, 300 DPI. BUT do a material engraving test to be sure that's the best settings for your machine. :)

@DH-lq6lf Год назад

I need to burn a logo into a pen I turned. I have the roller dialed in but I can't get the laser quite right. The logo is a little slopy for my taste. Any suggestions

@colinfarrowdesigns4627 Год назад

Hi Sam 6mm looks best for me. Thanks for great channel

@TheFalconJetDriver Год назад

Very interesting who would have thought that would work as well as it did! I just ordered last night a Longer Ray 5 10 watt with air assist it will be interesting to see how well it works using your technique. About 6 years ago I bough an Ortur laser Master original one in the T shape I believe it was 3.5 watts still works well.😁🛫

@Samcraftcom Год назад

Hope you enjoy it!

@TheFalconJetDriver Год назад

@@Samcraftcom thank you 😊 🛫

@v-dub1317 Год назад

3mm looks best to me on camera. 3-6 best.

@axelSixtySix Год назад

Hey Sam, thanks for this video. Did you ever tried finishing before/after lasering ? I like the before method on stone and I like it with a single coat of Danish Oil, which finishes IMHO pretty well the piece making it a step further in quality.

@vickyrupe8999 Год назад

Those looked really awesome 🤙🤙🤙🤙🤙

@Samcraftcom Год назад

Thank you! I have several new designs for coasters on our website. More than this one style. :) greenacrehomestead.com

@BlissfulBloom992 Год назад

Nice content bro

@Samcraftcom Год назад

Appreciate it

@georgemccombs5070 Год назад

Where did you get the coasters? This looks very interesting.

@user-so6yk9fs1u Год назад

You could use it on a fine work canvas Can you draw on canvas?

@prestongriffin416 Год назад

yes i thing so to i liked 3 great test great video SAM HAVE a good day

@Samcraftcom Год назад

Thanks! You too!

@clydedecker765 Год назад

Imma lookin and I think the 6mm LOOKS the best "on camera" but your solution seems the best -- yu der - me not.

@jonathandamewood5749 Год назад

3 mm looks best to me on camera. But I understand it may be clearer in person.

@46B3x2you Год назад

I noticed that you had what looked like a Atomstack P9 hanging on the wall behind you. I just bought that laser and I'm wondering what you think about it.

@Samcraftcom Год назад

It's actually a Genmitsu laser, but similar I guess. :)

@I-LOVE-EARTH Год назад

Nice. Where do you get those crazy smooth / flat coasters?

@Samcraftcom Год назад

I import them myself from overseas. I want to offer them wholesale to other makers, but have struggled with getting consistent results from many suppliers. I've been working on it for about a year solid now.

@I-LOVE-EARTH Год назад

@@Samcraftcom thanks...the ones in the video sure are nice and flat, makes life a lot easier. Would be great if you could sell them to us.

@claym6061 Год назад

Love your videos. When you ship your coasters in the bubble wrap, what type of outer packaging do you use?

@Samcraftcom Год назад

Depending on the customer's order and what other items they purchase they can ship out in a variety of boxes.

@raulrojosr5824 Год назад

I have never had a laser of any kind never used one which laser would u recommend l wish l could talk to u live but oh well b waiting for ur answer

@mattdworaczyk1884 Год назад

Thanks for the tip! I'll have to try this. Do you have a link anywhere for those coasters? I haven't had much luck finding consistently priced smooth edge coasters.

@Samcraftcom Год назад

No links for these style coasters. I work directly with the manufacturer and import them in bulk quantities (thousands per shipment).

@doroscnc Год назад

Love this ❤️ Great vedeo 👍

@Samcraftcom Год назад

Glad you liked it!!

@TP-si3km Год назад

😃👍Danke für das Video

@HalfAssHomestead Год назад

My problem is that you are not doing this with the original XTool D-1 10 Watt. The one you are using, is the D-2 20 watt.

@Samcraftcom Год назад

Same concept applies, this isn't specific to the xTool. Any laser of any type will benefit from you testing the focus.

@jamescooke3872 Год назад

Mr. Sam, where did you get the smooth edge slate coasters?

@Samcraftcom Год назад

I import them directly from overseas through alibaba

@johndeaux9987 Год назад

Well, crap....I had enough to do today without experiments, lol. Now I gotta try!

@icmpeko Год назад

Nice! Do you spray the coasters beforehand these days (or after) -if so, with what? 🤔

@Samcraftcom Год назад

I don't, I leave them raw. I am just about done with a 3 month extreme test on coasters with a variety of finishes too. That will be a fun video to share. :)

@osielflores9204 Год назад

How do you know what speed and power to use ? New to laser engraving

@Samcraftcom Год назад

You want to run an engraving test for every material you use. If you use Lightburn, I offer a premade file you can purchase and load. It's under the "Laser Test Files" section of my website: sam-craft.com I also sell it on Etsy if you rather that platform.

@robertgarciajr8079 Год назад

I always get a machine alarm what can I do to fix this ???

@Samcraftcom Год назад

My flame alarm on my D1 Pro 20w was always causing me problems and giving false alarms. I disabled mine through settings. This link will help: forum.lightburnsoftware.com/t/turning-off-the-flame-detection-on-xtool-d1-pro-20-watt/77960

@vincewesson-xi6qi Год назад

Hi Sam, great video. What watt laser are you using?

@Samcraftcom Год назад

This test was with the xTool D1 Pro 20w module.

@MarkChristopherpens Год назад

The 6mm was the best

@wymanhammond6466 Год назад

6 all day

@michaeljensen7146 Год назад

hi sam how do you get the laser to engrave one at time in lightburn ?

@Samcraftcom Год назад

Group your coaster design per coaster, then set the layer settings to fill all groups at once.

@jakerazmataz852 Год назад

IMO 6, 9 are both better than 3. 3 has several missing spots, 6 none and 9 a couple smaller ones. OK, looking again, it may be a tile quality issue. 3 has some fissures in it, that look like they may have cause some of the missing spots. 6 and 9 look like very good sample tiles. OK, I liked your solution at the end. 🤷‍♂👍

@Samcraftcom Год назад

I agree with you. :) Your thought process in the comment is exactly what I was thinking in the shop realtime. :) That first coaster tile was pretty rough, so I credited the flakes to it being from my "trash" pile.

@johannvantonderlife 7 месяцев назад

6mm

@steveferguson1232 Год назад

What power and speed did you use

@Samcraftcom Год назад

Remember to always test your own laser with each material, but here's what I ran from Lightburn (no xTool creative space here): 250 mm/s, 50% power, 300 DPI.

@tt3233 Год назад

How do you manage to get your parts consistently aligned with the cut? Did you bolt down the laser to a spoil board?

@Samcraftcom Год назад

It's still in "prototype mode" but my spoilboard is locked into the laser, yes. All my jobs run from the home position (absolute coordinates) in Lightburn. This keeps everything right in place like they should be. :)

@tt3233 Год назад

@@Samcraftcom thanks. That helps a lot.