Thanks for the video. It was very informative. FYI - you can use the HPN 7 in 1 to sublimate the wine tumblers. Just use the large latte attachment. It will only sublimate on the flat surface, so you have to make sure the image doesn't go into the bubble bottom part. The front screw knobs do increase the pressure as well as the back knobs, so it's really helpful when sublimating anything with a slight curve like the wine tumblers. The front knobs are not as obvious as the back ones, but they really do tighten the fit. Thanks again!!!!!
Right in time 😅.. I was just looking for a new Tumbler press and was indecisive on which one to get, but your video came up right on time and decided for the PYD Life because I have 2 mug presses.. Thanks so much Katrina 💕
WOW!!! Thank you Katrina for doing this informative demonstration. I just purchased the large WALA sublimation oven and now will be purchasing the 7-in-1 tumbler press. What I love about this is that you don't have JUST one brand which makes a huge difference for me.
Good morning, Trina Here I am watching your videos again. If I was in the market for another mug and tumbler press, I sure would be getting that 7 in 1 press. It literally has everything! But I’m working with my 8 in 1 swing away that came with 4 mug and tumbler attachments, as well as a cap and 2 size plate press. But I sure love that 7 in 1 press a lot. Girl, did I tell you that I purchased a Black and Decker air fryer with convection technology? Lord help me, I think I over did it and sublimated my image right back off my tumbler because it barely had a faded design on it when I unwrapped it. It has taken me this long to come to that conclusion. That thing has been sitting in there all that time since I didn’t get a good tumbler image the first time I used it. I had already seen in another video that you can bake the image off the tumbler if you make a mistake, and re-sublimate a darker image on it. So I didn’t toss the three tumblers that I messed up when I didn’t realize my tumbler heater element was defective. Thank goodness I am still able to sublimate tumblers with the mug attachment. My mother used to say, “There’s more than one way to skin a cat.” But I think I heard Delonda ask, “Who’s going around skinning cats?” 😂 She’s simply hilarious!!! I have learned so much from you all. SO MUCH! And I’m SO GRATEFUL! I don’t even know if you will see this comment, but I just wanted you to know that I truly appreciate you. I haven’t been watching as much as I have in the past, but I haven’t quit. You are so motivating, and I really appreciate all you do. Thank you. PS. Did you present your son with his very own award from Katrina’s Graceful Creations? Maybe with a little RU-vid logo on it. He would be so happy to receive it. I bet you can do a really nice one using a square clear glass with some beautiful silver metallic adhesive vinyl… then protect it with some clear coating, or the clear protective sheet. I’m thinking it as I touch-type. That’s just how I visualized it, but I’m sure you will have a much better method. Especially if you have a laser cutting tool. But, you could probably combine engraving with the silver metallic. I would like to see you design and create such an awesome award for your son. It would inspire others to create something unique and similar as well. Stay safe and successful! Donna Coastal Georgia
You just don't know how much you have helped me. I will be getting the 7 in-1 from Heat Press Nation. I need the best and you have shown me the best! Dahlene
That’s a good idea to get a tumbler press and do the mugs also . I wish I had know before I bought a mug press but that’s why we look at the videos we learn from the professionals I love the videos, I think I will be getting a tumbler press real soon
Great video! I have the CraftPro press. I got it before the fun colors were introduced. I hated it at first until I learned that my Epson sublimation paper was too light. Switched back to A-Sub and it was like the heavens opened up and smiled on me!
@@katrinasgracefulcreations3711 I see A-Sub has DTF film too! I hope you’re able to get your DTF printer issues resolved and possibly see a review on it 😊
Hi Katrina, I watched your video for how to select the best tumbler press. I had already made up my mine and your tuturial confirmed. The 7 - 1 is absolutely the best! The added bonus for HPN 7-1 is they have lifetime support services. Loved your video.
30:05 I use a mug press to do those tumblers I just don't put the button half in the machine at all, I only do the top portion of the mug and It works.
thanks for this video! I've watched all the full length unboxing videos but nice to have them all in one! Been on the fence between a Cricut Mug Press (or similar) vs a larger that can do tumblers too (like the PYD you showed). Budget is definitely a consideration
Thanks Katrina for this video. I've been looking to upgrade from the Cricut Mug Press (still like it but limited with what I can do in it besides mugs). Helped a lot. 🙂
Thank you for this! I am looking to potentially get into this, and a video like this is exactly what I was looking for. (I'm probably going to go with the CraftPro Mug and Tumbler Transfer Machine).
AWESOMEEEEEEE. I love this video. I am saving up for a tumbler press. Hopefully i will save enough upcoming months 💪🏾🎉 Thank you for showing them all Love hour hair 😊
Hey Ms Katrina, I have the purple BetterSub mug press and I did the wine tumblers in that. Came out great! Thank you for all your wonderful info! ❤️❤️❤️ your content.
Hi Katrina, great video! I've seen all of the unboxing videos, for these presses. But it's great see your opinion on them along with which was your favorite. I have the 2 in 1 from HPN but used to have a cheap one that lasted 6 months. I learned my lesson. Buy quality! I just do tumblers, mugs and can koozies so I just got the 2 in 1. The 2 knobs on the fronts do unscrew 2 round metal plates in front to allow more room inside heating area. If you look inside, either without a platen or from the front just below the black part, you'll see the 2 round white plates. At first, I thought the same as you because I didn't see them doing anything. But I haven't had to use them either. Thanks again for the video!
I'm pretty sure you put the wine tumbler in backwards in the latte sleeve. You put the wide end of the tumbler in the narrow end of the latte sleeve. If you switched it around it looks like it should work better.
Hi Katrina!! Thanks so much for all your videos. I've been watching for weeks and been making big decisions! I bought the HPN craft pro mug and tumbler press. I've been dealing with a strong smell from the press itself. Does this smell die off with time of using it? Or can I run it for a while and keep an eye on it to burn the smell off? Any tips?? Thanks so much for all your help and videos ❤❤
You are the sweetest. New sub here. Question for you. If you want to sublimate a XL coffee cup, say 22oz, like the ones you see at marshalls for the holidays, what heat press would you recommend? Its so hard to find one that has an attachment bigger than 15oz. Im not looking to full wrap the cups, more of small designs. Thank you ❤
I would probably just put it in a mug press but the tumbler attachment for the 30oz tumblers might work. Depends on how wide the mug is. I haven’t tried that size sorry
23:39 couldn't you just keep the tumbler attachment on and do mugs and tumblers without swapping it out and you would 🐝 able to press 2 different mugs at the same time?
Hi katrina, love your videos! with the 7 in 1 from heat press nation your showing a 12 to 20 0z heating element and a 30 oz heating element with the white cord.. When I went on the sight.. It's not showing those actual two elements...I was told one was a water bottle element....There is only one shown in the 7 in 1 that has four holes to screw the element down. I just wanted to mention that so no one else gets confused about it.... I reached out to heat press nation and I was told that you were speaking of the water bottle attachment which to me does not appear to be the same as the 12 to 20oz attachement that your speaking of. I was just try to get it all cleared up before my purchase.
Would the wine tumbler fit the latte attachment if you slipped it in open end first and bottom toward the wide end? It seems to be flared wider at the bottom from the lip to the curve toward the bottom. It's worth a try to see if it fits. If it fits, how does the sublimation turn out?
I watched a video that said to sublimate the wine cup that you can use the latte attachment and turn the wine cup putting the wide bottom at the top of the attachment. I've never tried it.
Hi I new at this So I see all Tumblr press but would recommend the five pieces that comes with your 8 and on 1 basic heat press do u have video on items you need for beginning start up business thanks
Hello 👋..Thank you for this video...I had a looked at the reviews on Amazon for the Pyd ppl were having issues with temp burning when doing trying to do multiple tumblers at a time ..Have u had any issues ....if you done multiple tumblers at a time ?
29:17 if you have a paper that doesn't bleed, would you still need butcher paper? I use A sub paper and I never had the ink pass thru the paper onto my machine before PS I Love your ch and your personality.
Thank you so much Katrina for this review because I have been doing research for the last 2 months on which Tumbler / mug press I want to purchase in the future once I purchase a sublimation printer and I'm really feeling the last one which is your HeatPress Nation press with all of the different interchangeable sizes HOWEVER, I am very big on saving time because of my lifestyle and I did come across a Tumbler press by MECOLOUR which is a dual mug and Tumbler press on one machine and I was wondering if you were going to add anymore mug and Tumblr purses to your collection, would you consider this specific one to review. * Note: I did reach out to the seller through Amazon to see if they would consider sending you one for an honest review so I have to wait 48 hours for an answer, I really hope that they send it to you because I would really love to see your honest review on this one.
Oh wow. Thank you never seen a viewer reach out to a company for a RU-vidr. Much appreciated. I never heard of that brand. I get offers all the time from companies and some I have to turn down because it’s too many I know people don’t want to keep seeing the same thing over and over. But I will definitely look into them. Thank you.
@@katrinasgracefulcreations3711 You're Welcome. I wish I could insert a picture in these comments to show you that seller did reach back out to me via email through my Amazon account and they they follow you and that you are a great blogger and they also said that they tried to reach out to you so I don't know how true that is and I know that you are probably tired of doing the same videos over and over but that Tumbler press/ mug press looks very interesting. I thank you. 😊