WHY DID FORD MAKE THIS SOO COMPLICATED?

Подписаться 273 тыс.

Просмотров 159 тыс.

50% 1

PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/sleeperdude.
In this video we are building the very popular 5.0 Ford roller motor. They made the Windsor V8 engine from 1961 to 2001 in cubic inches ranging from 221 to 351 but most of them being 302. We plan to double the horsepower of this one with upgraded heads, cam , intake, headers, along with lots of other go fast parts. Let's get this thing ready to go in our 63 Fairmont Sprint clone.
#builtwithsummit
#poweredbysummit
Check out ‪@SummitRacing‬ for all your performance parts needs!
Here is a list of the parts used in this build
MEL-68-S Melling oil pump pickup tube
DOU-D660YA-B Dougs headers
SUM-G1583 Summit freeze plug kit
SDK-B-F101 Scott Drake engine pulleys
SUM-G6335 Summit timing cover
GMB-125-1420AL GMB water pump
SUM-250004-1 Summit fuel pump
EDL-7521 Edelbrock intake manifold
PNX-D7130710 PerTronix distributor
NGK-4091 NGK spark plugs
MRG-6861G Mr.Gasket valve covers
MRG-7120MRG Mr.Gasket gasket set
SUM-K8902 Summit cam kit
PIO-PF-580-4 Pioneer Thermactor plugs
ARP-254-3708 ARP head bolts
SUM-G3867 Summit dipstick
SUM-163302 Summit harmonic balancer
SDK-C2OZ-6023-B Scott Drake timing pointer
Merchandise available at thesleeperdude.com/shop
Become a boosted member to get behind the scenes updates and priority response to your comments / @sleeperdude
Check us out on
/ sleeperdude88
/ sleeperdude88
www.tiktok.com/sleeperdude88
our 2nd channel @Sleeperdude2
our 3rd channel @sleeperdudearmed
Or Send Fan Mail to PO BOX 3411 Riceville Tn. 37370

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 944

@Sleeperdude 5 дней назад

PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/sleeperdude

@michaelperez6355 5 дней назад

Hi 👋 GUYS 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰♥️♥️♥️♥️♥️♥️♥️♥️♥️ LOVE YOU GUYS YOU GUYS ARE MY FAVORITE SHOW

@darrenswails 5 дней назад

Are they Dave Ramsey approved?

@WDMtea 5 дней назад

@@darrenswails I looked into them, from what I can tell, you pay them your debt Ex 10K, and they ask you to default on your credit cards/lender, then they negotiate(buy) your debt at a reduced amount. You still pay them the 10K while they buy your debt at example 5K. Your credit takes shit for the next 7 to 10 years. The upside is that you won't pay all that interest which could be 80K if you continued to make minimum payments. I got as equity loan instead.

@ericd2791 4 дня назад

they might call me crazy, that i spend over $1.000 on a rv that was free. big block 440.

@Robert.Tower. 5 дней назад

Can we take a minute to acknowledge the fantastic camera work marge does week after week❤❤❤

@Sleeperdude 5 дней назад

Thank you

@itsmephil2255 5 дней назад

Amen to that, we would be lost without RU-vid favourite mother

@M.O.G. 5 дней назад

Yes, absolutely ☺️

@MicheleBozarth 5 дней назад

She is great! ❤ Y'all are great and I love watching your show! You feel like family to me 😊

@johntatum1951 5 дней назад

Yep, Tosh is good with the camera angles...Shirley for sure.

@jaywest4102 5 дней назад

We need a manufacturer of paint booths to sponsor Sleeperdude, because we know Squeezie is going to require her vehicle be finished to a much higher standard than normal.

@Sleeperdude 5 дней назад

That’s right

@waynekyle4431 5 дней назад

OH! ABSOLUTELY!!

@ronaldbrown7780 5 дней назад

For Sure

@RayBrown-hs1ub 5 дней назад

I'll agree that's a given a talented one of them all

@NenadTrajkovic 5 дней назад

Good point there!👍

@joethepirate1 5 дней назад

First, I'd like to say that you are the only RU-vidr that I've seen take a moment to celebrate Joe Elmore. Thank you for that. I grew up with him, too. Second, I'm fixin to put a 302 in my Maverick and this is EXACTLY what I needed to see! Part numbers and everything. Thank you! I just hope I can replicate your results. Thanks, Josh and Fam.

@Sleeperdude 5 дней назад

Thank you. I’m glad you liked it

@iufan71 5 дней назад

Josh..did you grow up watching Shade tree mechanic guys?.....always loved to watch them and whatever Stacy David was building on his show.

@broonysaint 5 дней назад

I think it's great that you show kids can be hand-on with your builds and it isn't only blokes that enjoy working on cars. You really do make a great teacher SleeperDude.

@greggsvintageworkshop8974 4 дня назад

That little 302 is going to really light up the Falcon. I've been waiting to see the V8 swap come together on this car. The Falcon is going to be SO SWEET! Great video Josh and family!

@fredsimmons2793 5 дней назад

It's good seeing Squeeze get her appetite back after her run in with being sick.Same with all the chillin.

@vladflux 5 дней назад

Love your show ,PLEASE never change your fast forward music. It's sounds old school, and is relaxing, not some of other channels crazy rock music. I watch you and your family over and over, calms my PTSD. THANK YOU. 🙏🙏🙏🇺🇸🇺🇸🐏🐏🐽🐽🐖🐖

@MissionRestomod 5 дней назад

Joe Elmore was a big influence on me and my car guy journey. We didn’t have RU-vid in the 90’s and early 2000’s. Saturday morning car shows like Joe’s made a big impact on today’s mechanics and car guys. Salute to Joe for helping blaze the trail.

@noeschmoe9927 3 дня назад

I love the way Wawa looks at her father; such adoration. You are a good man Sleeper-dude!

@Sleeperdude 3 дня назад

Thank you very much!

@nickroden3593 5 дней назад

Sleeperdude out here making Saturdays great again!

@Sleeperdude 5 дней назад

You already know!

@gerrygwilson2849 5 дней назад

I’m running stock 350 in 84 Chevy truck had to block return off of mech fuel pump and it runs fine but now I get 5 miles to gallon got any ideas ? It ran out of gas when it went to shift to second I’ve replaced fuel pump on block twice with precision pump

@TedOption 5 дней назад

I think you're going to have a return.

@mattwalsh4133 5 дней назад

Its Sundays in New Zealand

@RockinGuy1994 4 дня назад

I remember hotrod TV and horsepower TV. I'd watch them every weekend

@bootsnbaggers 5 дней назад

😂😂😂 For all the wrenching, fixing and building y’all have done… for Ralphie to say “what’s that?” To red loctite… 🤣😂 THATS funny!

@Sleeperdude 5 дней назад

He’s a mess

@gregoryblair9810 4 дня назад

When Josh was carrying Squeezie and she squawked it sounded like her mom! Man, I was a Ford guy but didn't know about all these differences. Rebuilt a 289 and dropped in a 65 Fairlane that had a 260. I must have lucked out on timing covers/ waterpump and timing chain because I had no troubles and it ran great.😊

@Sleeperdude 4 дня назад

Thank you

@capicolaspicy 5 дней назад

Friend of mine took a dressed 396 engine and put a glass table top over it as his living room coffee table...it was pretty awesome! Your rebuild is looking fantastic - can't wait to here first firing!

@danobrien3109 5 дней назад

Laughed so hard at Sqeezie eating the vanias and gagging. Kid is too funny. Thanks for the wholesome content Sleeperdude family.👍👍🇨🇦

@Sleeperdude 5 дней назад

She’s a mess

@Wheel_Horse 5 дней назад

Gotta love a family that shares RC backwash!

@Sleeperdude 5 дней назад

Exactly

@ShilohShepherd 5 дней назад

Put together a 302, back when I was in high school. Cost me a fortune then. Had only 15K miles, on it. On a very cold morning. Just as you mentioned. I twisted the factory oil pump shaft, which lead to a disaster. An expensive lesson for me to upgrade that part in the future. Great video, guys.

@rgbigdog 5 дней назад

Josh you should have used the weak springs to set your push rod length, to check for proper valve/rocker geometry and for the valve to piston clearance. Remember your lifters have no oil pressure and will collapse under stock spring pressure.

@thebrokenbiker869 5 дней назад

I love watching you sir and the kids learning life skills. I love that

@Sleeperdude 5 дней назад

I appreciate that

@thebrokenbiker869 5 дней назад

@@Sleeperdude your welcome sir. Please tell the family I say thank you

@brucevallee5623 5 дней назад

Great job on the engine build. Who knew how many versions of water pumps, timing chain covers etc on the 5.0. Thanks for info.

@Sleeperdude 5 дней назад

Yes it’s crazy

@stephengay5181 5 дней назад

THAT WA...she's my fave...if she worked in my shop she'd realize you can be totally unhinged and still turn out some of the fastest Vdubs on the Left Coast...Wa is most impeccable...love your guys channel.

@AdamJones-cl4xd 5 дней назад

Poor Squeezy gagging over the Vienna sausages 1:10:18 mark. Awesome build thanks guys. Best RU-vid channel on the planet

@bigdaddy741098 5 дней назад

Ikr, the first one went down fine, the second one, not so much lol. I get it though, once you remember you're eating raw meat from a can, and that it's more lips and bums than actual meat, it's never going down easy after that. They'd probably be way better if you threw them on a bbq and got some grill marks on them, make em look like you're eating real food lol.

@Carcrafter7165 4 дня назад

I didn’t realize that over the years that the ford Windsor has 6 different timing covers I knew about the regular rotation and reverse rotation water pumps but never knew of the short water pump towards the end of production. Thank you for explaining this I learned something new about SBF. Can’t wait till it goes back in the Falcon.

@Sleeperdude 4 дня назад

Glad to help!

@johnkranz4004 5 дней назад

Very nice tribute to Joe rest in peace. Great work and video SleeperDudes

@RazingthenRaising 4 дня назад

Torquing bolts in sequence is EXTREMELY important! If you don't, you can cause them to twist and/or warp. This will cause bad compression and can cause coolant to go into and out of the cylinders. ALWAYS follow the tightening sequence!!!!

@Sleeperdude 4 дня назад

Ok thanks

@jakleo337 5 дней назад

"The life of a Ford parts counterman is not to be envied".

@N83Gaming 5 дней назад

I remember when I was a kid watching my uncle fully braking down a motor form a 1974 Trans AM. He painted every part of the motor a different color, and put it back together. He called it his Picasso motor I thought it was one of the coolest thing I ever seen. I'm 41 years old now!

@Sleeperdude 5 дней назад

So cool

@NicholasBaker-md6jq 5 дней назад

I watched joe back in the day learning about horse power from him but it’s a loss to all gear heads and body workers Rest in peace ☮️ Joe !!!!

@waynerohde1036 5 дней назад

Alot of the guys that have been on the powerblock/powernation have youtubes

@NicholasBaker-md6jq 5 дней назад

@@waynerohde1036 yes

@NicholasBaker-md6jq 4 дня назад

Yeah

@mike18421 5 дней назад

Joe was a great guy and an influence on me as well. I met him at Cecil County Dragway in Maryland during an event. He was a true car guy. RIP

@Sleeperdude 4 дня назад

Yes! Very cool

@joebeach7759 4 дня назад

Joe Elmore had the best voice for TV and could explain anything.

@Sleeperdude 4 дня назад

Yes

@182Warren 5 дней назад

Man I absolutely love those OHSA approved slip slops .

@Sleeperdude 5 дней назад

Exactly

@Mia-fz6xr 5 дней назад

Can't wait to enjoy the episode

@Sleeperdude 5 дней назад

Thanks

@AddieDirectsTV 5 дней назад

15:10 insert Stayin’ Alive here during the pig walk. Lol.

@Sleeperdude 5 дней назад

🤣🤣

@williamleonard1461 5 дней назад

Rip! Lizzy Musi. A racing legend.

@Sleeperdude 5 дней назад

Absolutely

@feron450 5 дней назад

Man this video brought back a lot of memories from high school helping my buddies with their mustangs doing cam swaps with the “alphabet cams”

@Sleeperdude 5 дней назад

Yes!!! Good times

@johnelliott7375 5 дней назад

It is amazing how quickly the channel has grown since the old place, quitting your job full time and going full time. Summit racing is a great place , The one in Ohio is the oldest Flagship store, and I was buying stuff from them for decades also since the the late 80's. I finally got a 88 Mercury Cougar XR7 with the 5.0L engine and it only has 50k on the clock. No rust anywhere and I got it from a 90 year old man who kept it in a climate controlled garage since 1995. They put a entire new stock fuel system on it tank, lines, pump, sending unit, filters, everything. Wouldn't run for more than 15-30 seconds, they put a PCM , 8 new/used injectors cleaned the EGR. Same thing my Ford guy at work told him, they were going to scrap the car after they told him what it needed to be fixed. I was fortunate enough to get the car for south of a thousand dollars and I replaced the fuel injectors with 8 new ones for a 89 mustang 5.0L and it fired right up. Needs a upper intake gasket and the lines finished underneath due to a small vacuum leak and I will have a great little runner. I'm going to build a engine for it and I will be using some information and tips from your channel Josh ! I hope you have had a great 4th of July weekend and I will be watching to see how this motor turns out. Thanks for sharing as always and have a great day today.

@bengyperez6933 5 дней назад

He was a mentor of tv n hotroding ! He was a pioneer n we’ll miss him a lot ! I was an hot fodder from Paterson,Pa n No. Philadelphia, Pa In the 70’s to the 90’s !

@Sleeperdude 5 дней назад

Yes!!! 👍

@flubber8396 5 дней назад

Sleeperdude, the other side of caliper measures in the inside of something. Such as the exhaust ports. Hahaha. Sorry I had to educate if you didn't know, which I am sure you do know. Can't wait to see this engine ROAR to life! Ford guy here!!!

@Sleeperdude 5 дней назад

Yes thanks

@vbtbmrt4394 3 дня назад

Yep three side on the calipers outside =big side Inside= pointy small side Depth=long end

@erniescarano1522 5 дней назад

Can't wait to see the Falcon run with this engine!!!

@user-hk2rl3ru5l 5 дней назад

Good to see you and Marge working together. Don't get to see much of that because she is the camera person.

@johnnydanger57 5 дней назад

You forgot the harmonic balancer should be mounted before tightening the cam chain cover so the crank seal is centered.

@victorrobison5069 4 дня назад

You may have heard this before, but 1 quart of engine oil swapped for a quart of atf and left until the next scheduled oil change will not hurt the engine and will clean the "gunk" better than you might think. That's not "something my buddy told me", but 37 years experience working on cars and truck fleets.When you get an old engine going, the first oil change should include one quart of ATF. I have torqued some detroit diesel head bolts to 300 ft pounds, but never gone over 125 for a 302 ford, and that was a special build for circle track racing.

@kdog622 4 дня назад

I ALWAYS fit the harmonic balancer on the crankshaft before tightening the timing cover bolts to ensure the shaft seal is exactly centered, or you risk a shortened seal life. Then you can remove, or finish torquing the balancer on. I'm enjoying your build.

@bungeycord5971 5 дней назад

That is going to be one fast Falcon. Nice job on the build the engine looks great.

@Sleeperdude 5 дней назад

Thank you

@AddieDirectsTV 5 дней назад

1:13:12 Murphy seems to enjoy his job of protecting the goats.

@Sleeperdude 5 дней назад

He’s the best

@user-li1fi4qu5n 5 дней назад

Great video! Thank ya'll! I grew up around 5.0s, this is by far my favorite build.

@dianecolquhoun5003 5 дней назад

Love this channel and family.We don't miss an episode❤

@kennethsonier1766 5 дней назад

Good afternoon from Cape Cod ⚓ I learned something very important from you working on that motor, I'm definitely sticking to Chevrolet 😉 actually I learned a long time ago the engines I hate the most of the ones I am currently working on 😂 thanks guys for a very enjoyable video, I'm looking forward to seeing that engine installed and rippin 🔥 keep up the great work guys and may God bless you all ✌️🇺🇲

@spectrophage 4 дня назад

aww God Bless, Joe Elmore RIP. thanks for sharing that. 302 is my second favorite motor, glad to see the upgrades.

@pavil58yt 5 дней назад

A really enjoyable video. Seeing the engine go together is what it's all about. Gives me good insight for working on my 83 Capri.👍

@VorlonFrog 5 дней назад

Another Squeezles merchandise ad!! Way to go, Squeezie!!

@martinmcdoniel4551 5 дней назад

YAY! best day of the week! Josh and Marge and Ralphie, Wa and Squeeze! tuned in with my Viennas and my RC!

@Sleeperdude 5 дней назад

Thanks

@Carcrafter7165 4 дня назад

1:03:11 when I had my 351-Cleveland built I immersed my oil pump in a clean bucket with oil and took the pump drive shaft and prime the pump.

@jameskearney4100 4 дня назад

Super looking engine!! My first car was a 1962 Falcon station wagon, my Dad gave me.

@Sleeperdude 4 дня назад

Awesome thanks

@lindastabell6598 5 дней назад

Woohoo! My favorite family. Good luck on the motor work today. 🙏🙏🙏

@Sleeperdude 5 дней назад

Thank you!

@sykwookiee 5 дней назад

I'm old enough to remember real family comedies on TV... The Bradys,The Partridges, Happy Days....The Bunkers😂...y'all are definitely in those shows wheelhouse...take care y'all@Sleeperdude

@lindastabell6598 5 дней назад

You're welcome

@alynwilson5694 5 дней назад

Another great video! A feller needs to take one end of the old shop by the house and turn it into a paint booth. A feller has years of experience in auto body that the kids would be lucky to learn. Great content!

@Sleeperdude 5 дней назад

Yeah we might one day

@bigyin1690 4 дня назад

Nice lil engine build and it looks really nice with all the new parts cant wait to hear it

@Laineycares 20 часов назад

Kids are growing up so fast. Thank you for clean fun and interesting content . We appreciate the time and effort that you put forth for our entertainment. Remember, my Tim worked on these older cars for many years and still has tools for those jobs. Just let us know anytime.

@elwhastrummer 5 дней назад

Awesome video guys, Sleeperdude is my favorite car tube channel! 😊

@Sleeperdude 5 дней назад

Glad you enjoy it!

@rodneycoleman4942 5 дней назад

SLEEPERDUDE SATURDAY

@Sleeperdude 5 дней назад

Thanks

@robostyle9773 5 дней назад

Thanks for another great video!

@ronniewilson4934 5 дней назад

Good job. Very detailed.

@bonescommiecrusher6473 5 дней назад

I'm glad that you started a rumble channel, the audience is a little smaller ,but is more free and AMERICAN...👍👍👍

@Sleeperdude 5 дней назад

Yeah Ralphie is crushing it on there

@Hard_Right 5 дней назад

just found this channel although i've heard puddin mention it a few times i've never gone looking for it simply because im already subscribed to so many channels but that being said i love Rumble unfortunately everyone is on youtube, im subbing to both just because y'all are on rumble. I really wish more automotive content creators would upload to both !

@gumbomudderx7503 5 дней назад

That’s good info on that summit cam. I’m a big fan of the F303, but in the last few years they cost as much as I’ve spent for custom grind solid rollers. Definitely gonna check out the Summit one!

@rctd511 4 дня назад

I spent many years at Cummins building 10, 11, 12 and 15 liter engines putting heads on them. Torque was between 430 and 480 Ft pounds for the bolts depending on which engine size.

@timhardison4084 4 дня назад

Love the upgrades. Great teamwork assembling the motor. Now, please, finish something. Its killing my ocd! Love you guys!

@jonnysuperglide 5 дней назад

This is going to be a good Saturday with sleeper dude family that was awesome of you to honor Joe he was a legend .!!! that falcon is gonna be a beast with that motor have a good weekend guys. god bless with lots of love from Pittsburgh pa

@Sleeperdude 5 дней назад

Thank you we are excited about it.

@chriscray506 5 дней назад

Have a great weekend sleeper fam. Thanks for the video

@Sleeperdude 5 дней назад

Thank you too

@johnwalter9696 5 дней назад

looks great. caint wait to hear it

@danhard8440 5 дней назад

80 ft pounds is not much for head bolts considering most wheel lugs are 100

@Sleeperdude 5 дней назад

Yeah 👍

@seandayma 5 дней назад

Wawa's face when you mentioned the engine in the living room. 😂😂😂😅😅😅😅😅😊😊😊

@Sleeperdude 5 дней назад

🤣🤣👍🤣🤣

@poohssmartbrother1146 5 дней назад

After a hard days work, its nice to come home and rest with a sleeperdude build

@brettjones5041 5 дней назад

Thankyou Mates Every Program is a learning Class . I Dig Every Class

@Sleeperdude 5 дней назад

Thank you

@tommyhijmensen6257 5 дней назад

wooohooooo 👏another new exciting sleeperdude-saturday-episode ! Hopefully wrenching on a big block.(looking at the thumbnaill) Let the sleeperdude-saturday-party begin ! As always God bless you guys and God bless America ! Greetings from Holland 😀🇺🇲🔧🚘❤️🙏🏻

@Sleeperdude 5 дней назад

Hope you enjoy!

@taylorstephensstormtracker 5 дней назад

It's always a good day with a new sleeperdude video

@Sleeperdude 5 дней назад

Thank you

@taylorstephensstormtracker 5 дней назад

@@Sleeperdude you're welcome

@inasnap7133 5 дней назад

Ton's of great info , Thanks

@TheCrackerBox 5 дней назад

Great looking motor !! Thanks for another , Brother !

@richardp6178 5 дней назад

Just trying to help. MLS gaskets need extremely clean machined surfaces to seal. not a good idea on an old unmachined block, that's what composite head gaskets are for. Don't jack on machined surfaces with crowbars, screwdrivers etc., you'll wreck the mating surfaces and cause leaks. Don't use stainless fasteners on engines! They're not strong enough and they cold weld and strip threads unless you use anti seize. Use steal reinforced silicone gaskets on the ends of the inlet manifold not huge beads of RTV. I have never had an intake leak doing this. Don't use RTV or any form of coating on gaskets. They come impregnated with boding agents so they glue themselves after a few heat cycles. you ruin that if you coat them with anything. I've been building engines for forty years including aircraft engines and my engines don't leak or fail, ever.

@danhard8440 5 дней назад

at 31:51 Josh must have forgot the back side of the caliper is for measuring the inside bore🤣

@Sleeperdude 5 дней назад

🤣🤣

@terrytye6497 4 дня назад

Another great build to learn.

@mikahakkinen5651 5 дней назад

cant wait to hear it running

@danhard8440 5 дней назад

funny way to say that Ralphie is making flat pieces of steel that have a angle on one side and taper to a very acute angle at the top🤣 must say that is an amazing hobby and can make him big money

@ryurc3033 5 дней назад

I found I could harden an edge by just welding, and quenching. Was always surprised how well it would hold an edge. Also used tig rod meant for welding cast steel. Shame the utubes are such panty waste sissy's obsessed with "safety".

@Sleeperdude 5 дней назад

👍🤣🤣

@rhondasweeney7271 5 дней назад

Lots of information for people who build engines. Love it when the children do goofy things! Thanks for sharing 👍 😊

@Sleeperdude 5 дней назад

Thanks for watching!

@vanpunk 4 дня назад

New subscriber, very cool to see a family work so well together!

@Sleeperdude 4 дня назад

Thank you!

@willierule3744 4 дня назад

All right man you’ve been in a funk for a little while now building these engines and have them blow up Anya. Let’s hope that this one is the first and one in Dunn one and done. I know you guys got this you got the best team in the world right there with you

@criptanite2838 5 дней назад

Was waiting for this vid today bangers 🎉

@Sleeperdude 5 дней назад

Hope you enjoyed it!

@20thCenturyMan 5 дней назад

Greetings from Germany! Love the show.

@danhard8440 5 дней назад

where in Germany? i watch from Minneapolis Minnesota

@20thCenturyMan 5 дней назад

@@danhard8440 a small town called Unna.

@danhard8440 5 дней назад

@@20thCenturyMan nice i google images of there really pretty buildings and churches the origins of my family was a town called Dansk Poland but you know being American i have pretty much everything now genetically🤣

@20thCenturyMan 5 дней назад

@danhard8440 that's the whole world now lol

@Sleeperdude 5 дней назад

Awesome! Thank you!

@StevenDailey-ul6iz 5 дней назад

You always give the most info on fit and fitment on things like this keep it up man great content

@saltynlit 5 дней назад

Nice lookin engine.... can't wait to hear her run n chop.... God bless y'all!

@Sleeperdude 5 дней назад

Thank you

@dennysauls2117 5 дней назад

I have been waiting on this one. Just awesome and keep up the good work 👍 😎 God bless you all and semper Fi

@Sleeperdude 5 дней назад

Thanks, you too!

@dennysauls2117 5 дней назад

@@Sleeperdude ur welcome

@michaelcoffey7362 4 дня назад

Will watch on Monday 😀

@user-lr6lx8xg2s 5 дней назад

Lmao was Squeeze about to barf choking down them Viennese?? Great Vid Josh thanks to all of y’all!!

@danhard8440 5 дней назад

OMG at 1:10:10 Marj and Squeezee had me crackin up🤣

@Sleeperdude 5 дней назад

Nothing but trouble them two

@DroooooopDead 4 дня назад

Great knowledge there buddy

@BudFranks-fu9ye 5 дней назад

Great video guys👍thank you🙏💯

@mromatic17 5 дней назад

i've been watching your channel for a few years and I love seeing a good family build cars together. I wish I had this kind of family growing up. I'm the only one in my family who is a gearhead. Its cool to see the kids grow up and see their personalities shine. squeezy is really cool I used to love painting when I was a kid and she has a real talent! keep up the good work!

@Robert.Tower. 5 дней назад

If you get bite by a goat do you get super super goat powers like spiderman?😂😂😂

@Sleeperdude 5 дней назад

Absolutely

@danhard8440 5 дней назад

WOOHOO LETS GO !!!

@Sleeperdude 5 дней назад

Yes!!