Why Doesn't Everyone Make These 5 Miter Saw Upgrades?

Подписаться 586 тыс.

Просмотров 434 тыс.

50% 1

These tips and tricks will show you how to get cleaner and safer cuts on your miter saw.
Videos To Watch Next
How to Cut More Degrees with Your Miter Saw - • Cut More Degrees Using...
DIY Miter Saw Station - • How to Build a Space S...
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Products in this Video:
Shop Nation Miter Saw Dust Collection Adapters - bit.ly/ShopNationStore
Fast Cap Zero Clearance Tape - amzn.to/3OQEVGI
Colliflower Zero Clearance for Kapex - amzn.to/45tkWVQ
CMT Chrome 80 Tooth Blade (Amazon) - amzn.to/3Z7uNhL
CMT Chrome 80 Tooth Blade (40% off at TayTools) lddy.no/1hueq
CMT ITK Extreme (budget friendly blade) - amzn.to/3Ecyrgn
Diablo 80 Tooth Blade - amzn.to/44n1ict
10 Million Dollar Stick - amzn.to/3YYY0v1
CA Glue I Use - amzn.to/3KWiK0G
StealthStop Stop Blocks - amzn.to/45Mot0S
Dust Extractor I Use - amzn.to/44uzanX
Miter Station Built Plans - www.731woodworks.com/store/mi...
DeWALT Miter Saw - amzn.to/45rUcEU
Festool Miter Saw - amzn.to/47NVxrc
Delta Miter Saw - amzn.to/45NizfZ
📲 Text DEALS to 1 (731) 207-7151 I send out regular texts to let you know about great tool deals.
Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Add the word VIDEOS to the text to be alerted when I post new content.
The full list of tools and supplies I recommend can be found on my website: www.731woodworks.com/recommen...
Other Tools/Equipment I Use and Recommend:
Ariat boots I wear (super comfortable) - ariat.dkkdet.net/9gJ5BY
Table Saw I Use - amzn.to/44XhPF5
Miter Saw I Use - amzn.to/3OqDIWi
Table Saw Blade I'm Using - shrsl.com/3xv5i
Toolbox in Background - homedepot.sjv.io/x9B2xy
Tool Organization Wall over Miter Station - amzn.to/45cQUFa
Digital RU-vid Sign - amzn.to/3GL2a2e
Work clothes I wear = TrueWerk Work Clothes - truewerk.pxf.io/GmbJjE
Camera Gear I Use - kit.co/731Woodworks/camera-ge...
Computer Equipment I Use for Editing - kit.co/731Woodworks/731-woodw...
🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! / 731woodworks
You can also join via channel memberships to get access to the perks:
/ @731woodworks
Get $10 off any order of stickers, labels, and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks RU-vid channel www.731woodworks.com/youtubed...
Some product links are Amazon and other affiliate links, meaning if you buy something, we'll receive a small commission. This helps support my channel so I can continue to make content like this.
0:00 Miter Saw Tips
0:10 Miter Saw Dust Collection
1:31 Miter Saw Zero Clearance
2:24 Best Miter Saw Blade
3:31 Cutting Small Parts on a Miter Saw
6:13 DIY Miter Saw Station
#woodworking #woodworkingtips #mitersaw

Хобби

Опубликовано:

19 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 224

@731Woodworks 8 месяцев назад

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: 5 Track Saw Accessories You Need - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-agVrU-g4yTw.html Tools In This Video: Shop Nation Miter Saw Dust Collection Adapters - bit.ly/ShopNationStore Fast Cap Zero Clearance Tape - amzn.to/3OQEVGI Colliflower Zero Clearance for Kapex - amzn.to/45tkWVQ CMT Chrome 80 Tooth Blade (Amazon) - amzn.to/3Z7uNhL CMT Chrome 80 Tooth Blade (40% off at TayTools) lddy.no/1hueq CMT ITK Extreme (budget-friendly blade) - amzn.to/3Ecyrgn Diablo 80 Tooth Blade - amzn.to/44n1ict 10 Million Dollar Stick - amzn.to/3YYY0v1 CA Glue I Use - amzn.to/3KWiK0G StealthStop Stop Blocks - amzn.to/45Mot0S Dust Extractor I Use - amzn.to/44uzanX Miter Station Built Plans - www.731woodworks.com/store/miter-station-build-plans DeWALT Miter Saw - amzn.to/45rUcEU Festool Miter Saw - amzn.to/47NVxrc Delta Miter Saw - amzn.to/45NizfZ 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

@Jackrob-dz6gh 8 месяцев назад

W😂

@TenmaFN 6 месяцев назад

sadly they do not have a dust collector at shop nation that fits a Metabo :/

@goMANgo84 2 месяца назад

You can send me all your old tools

@jeffgrove6568 8 месяцев назад

The Kapex Festool is worth the $1500 price tag. You get a very precision well made tool - BUT - they keep discontinuing models and I am already unable to get even the most basic parts for mine! DO NOT BUY KAPEX ANYTHING!!!!!!!

@stevenpowell3688 8 месяцев назад

Another good upgrade I did on my Dewalt Slider was adding the laser beam module that shows you where the blade will cut. It was easy to install and I got the instructions and kit from someone here on RU-vid.

@Stelios.Posantzis 8 месяцев назад

Nice collection of tips and advice that will save a lot of heartache if consulted before ever using a mitre saw!

@libertyvilleguy2903 8 месяцев назад

Five really good tips. Already have a miter saw station, and it’s wonderful.

@scruffysanta8442 8 месяцев назад

Great video. I have the Dust collector for my Ridgid glide miter saw and have been very happy with it. I also used the tape with my old miter saw and just have not had a minute to put it on my new Ridgid Saw. Now to get my self in gear and make the fence system

@Paul_Jonathan 8 месяцев назад

I definitely need to get a miter saw. I'll have to save these video and come back to it when I get one. God bless you

@KennelGirlBC 8 месяцев назад

Excellent tips & video! Not one second of time wasted, and I could follow every single thing. Thank you : ) : )

@TomRubicon5949 8 месяцев назад

I only used my miter saw for the first time last week. Although most of my cuts has zero tearaway, the miter sled is definitely on my to do list now!

@FixItFrench 8 месяцев назад

Literally building my miter station this week! Great tips and just in time 🤙🏼🤙🏼

@jwbnscacpt 4 месяца назад

I just bought that shop nation miter saw dust extraction kit for my new dewalt miter saw. Thank you for all your helpful videos!

@number1pappy 8 месяцев назад

Thank you for the zero clearance tape idea! I cant believe i didnt think of this! 😊

@steveocvirek6671 2 месяца назад

Fantastic helpful video ! ! ! I have had a nasty time cutting small pieces and your small part jig is so ingenious. Thank you for making this video.

@its_marc 8 месяцев назад

Did not know about the zero clearance tapes existence, Thankyou very much.

@michaelmenkes7233 8 месяцев назад

Thanks for this! immediately ordered the dust collection upgrade kit. My Dewalt cuts beautifully (with a finishing blade from Bosch) and I use it all the time for clean cuts at accurate angles. Its a bloody mess though.

@BrianAndrewStephens 5 месяцев назад

Matt you never disappoint. I've been woodworking for a while and you always teach me new things. Thank you.

@The-Handsome-Devil 8 месяцев назад

Great video I always use CMT blades in all my saws and I can say they are the best I have used.

@greenhornadventure 8 месяцев назад

I like this style of presentation far better than the "podcast" Quick and concise.

@Buffy1967 8 месяцев назад

Great video, great tips . We all or most of us start out with a miter saw .

@kenerickson4923 8 месяцев назад

I just bought the CMT blade and am totally impressed. Put a new piece of fastcap on throat. Old one was worn out

@robertmcevoy24 8 месяцев назад

I ordered the dust collection last week for my Dewalt miter saw looks like I’ll be able to get it a little closer to the wall as well , when I’m done remodeling my shop the sled is on my build list as I cut a lot of small parts for toys. Thanks for all the great tips Matt!👊🏻

@richardmoore1698 4 месяца назад

Thank you! I enjoy watching your shows. I just ordered my CMT blades from Taylor Toolworks. I was getting poor cuts and I didn't even think about the blade.

@dcruicks1 8 месяцев назад

Thanks! Very informative!

@77cemoore 8 месяцев назад

Thank you so much. I have the dewalt sliding miter saw. I love it but it is so darn messy! Thank you!

@pharaohacura3618 7 месяцев назад

i actually installed a range hood on clearance from Home Depot above my miter saw and exhaust it into a Kirby Micron Magic vacuum bag along with Bosch dust extractor a few years ago, lol…no dust in the air and i love the LED lights on the range hood as i’m making cuts…just learning about Shop Nation

@longshot726 8 месяцев назад

I bought the dust shroud for the Delta Cruzer from Shop Nation and the improvement is night and day. I dreaded having to use any miter saw just due to the dust explosion they always make, but the shroud easily takes care of 95% of the dust. Main thing is don't plunge directly into the wood. Run the blade out and push it into the wood if it is narrow enough. That kicks most of the dust right into the chute.

@storrance 3 месяца назад

I also have that saw and bought the dust shroud. It rules! Game changer. Go watch the Shop Nation video of him trying to intentionally break it. Might save you from having to buy a new one.

@951WoodworkDesigns-bx4kn 8 месяцев назад

I built a small miter station about the size of yours 2-3 years ago, but later I added a box with my shop vac in the cabinet directly beneath the saw and put a 6” scoop in the base of the station behind my saw. What a world of difference. The dust just flies in the box and gets sucked down into the vac. Not a lick of dust outside the box. I have the zero clearance tape, but can’t do the sled, or too lazy to do the sled as I’d have to rework my station to lower my saw to allow for the additional hight of the sled, but I installed a wooden backer plate against the saw fence and with the zero clearance tape, it works the same as your sled.

@melvmay 8 месяцев назад

Ordered the Dewalt dust collection based upon this video. I've got a full hood covering my saw with dust collection and it does a good job but improving the collection immediately around the blade can only make periodic clean-up easier. Looking forward to fitting it and not making a mess. ;)

@DIYCHURCHPROJECTS 8 месяцев назад

My inspiration in all the projects I do in my church is the way you observe safety which most of us Filipino fail to do so. Thank you!

@jimrosson6702 8 месяцев назад

Great tip Matt thanks for sharing

@D70340 8 месяцев назад

Awesome tips! Thank you!

@RJSDZNS 8 месяцев назад

I just finished building this miter station last weekend. I incorporated a hood into mine with a 4 inch dust port and dust doors. Matt I couldn't be happier with this station! I changed some things, such as added five sliding shelves in the cabinets but for the most part I followed your easy to read plans. I love your channel and your "5 things", anything videos! Keep up the great work my friend, and thank you!

@731Woodworks 8 месяцев назад

Awesome, thank you! Would love to see pictures of the finished product you made!

@RJSDZNS 8 месяцев назад

@@731Woodworks I would love to show you!! Send them to your new text #?

@731Woodworks 8 месяцев назад

@@RJSDZNS yes, that will work

@garymiller5937 8 месяцев назад

Thanks Matt. Really good ideas! 😊😊

@thenext9537 8 месяцев назад

Yep, shop nation. Shroud improves a lot!

@baddog4347 8 месяцев назад

I just put shop nations part on my delta saw today and it’s night and day difference 👍

@msk3905 8 месяцев назад

First thing I do with any miter saw is make several zero clearance inserts. Lately been buying HF Bauer blades fantastic bang for buck but I do love CMTs

@jeffdieringer1 7 месяцев назад

Great info - thanks!

@mcmathwoodworks 8 месяцев назад

Great tips Matt! A while ago I bought the zero clearance tape at your recommendation, and I’m definitely going to suck it up and buy the $10 million stick now… I really like the zero clearance sled too! One upgrade you didn’t mention was a laser or a shadow line… I bought a inexpensive laser that replaces the arbor nut of my miter saw from Amazon and that works pretty well! And Drew from Fisher’s Shop added a shadow line to his saw that seems stinking sweet! I hope you and Amy are doing well!

@fixerupperer 6 месяцев назад

I assumed the shadow line would be in this video

@reaper060670 8 месяцев назад

love the sled.. I only have a 210mm compoung mitre saw. No sliding on it. I'm going to try one of these sleds for it..

@urbannpa 8 месяцев назад

In my little shed right next to the laser engraver is my Miter saw and the dust drove me nuts. It was always extra cleanup at the end of a project.

@user-sb6ec7iy3o 8 месяцев назад

Your channel is very helpful. THANKS I hope. you make big $$$ from you tube. It's great to see a man of faith be subtle as the message is there to see but not being preached to. In addition your fast paced delivery is much appreciated. Excellent..THANKS

@mcseforsale 8 месяцев назад

If you're looking for a simple miter saw station, try the one from Shanty 2 Chic. I built that one about 5 years ago and it's simple and provides for bulky storage under the saw.

@garrett2635 8 месяцев назад

Getting the laser attachment for saws that don't have one (like my DeWalt) was a huge upgrade for me.

@robertivey3268 8 месяцев назад

I would love to get the dust shroud but it is still not available. I placed my order for it at least three weeks ago. All of the other things were done some time ago. Thanks for the tips.

@bigbee714 8 месяцев назад

Great video! Very informative, thanks

@731Woodworks 8 месяцев назад

Glad you enjoyed it!

@bobbrock41 8 месяцев назад

Excellent suggestions, Matt. I have a DeWalt 774 mitre saw which came with a 216mm (8.5 inch) blade. Can you recommend a CMT blade for that? Being a smaller diameter it may have to have less teeth than your 12 inch recommendation but not sure.

@kellyvcraig 8 месяцев назад

I note you shimmed your saw. You can make the recess for your saw deeper, then lay a piece of plywood on it. With four bolts, nuts and washers, you can drill through the bottom board, mount the bolts with T nuts, then adjust the board you laid on it up or down to accommodate dimensions of different miters. Drill holes part way into the upper board, for the bolt tops to go in to, to hold it in place. I came up with this when I was trying to come up with a way to move a mantle clock around and still have it perfectly level, which was critical to whether or not it worked.

@anthonyash3103 8 месяцев назад

Great video. Very helpful. Thank you.

@731Woodworks 8 месяцев назад

Glad you enjoyed it!

@MrRutabager 8 месяцев назад

Maybe I missed it, but don't see dust collection adapters for Makita miter saws either Thanks for the great video. Have a Blessed day

@adrianlouviere7650 8 месяцев назад

Thank you!

@DIYDEGEN 7 месяцев назад

Great video, very informative & on point.

@birdieerdie2349 8 месяцев назад

Great channel sir!

@BroRiv 8 месяцев назад

I ordered my Dust Redistribution machine from Worx..56v leaf blower. Coupled with the new $50 RZ mask, I'm golden!😂

@kevinrose8568 8 месяцев назад

The throat plates on those DeWalt's are adjustable. I had a zero clearance on mine by just turning a few screws. Though I had mine for several years before I realized that. Probably something in the instruction manual about that, but who reads those anyway.

@joeguilfoyle1922 8 месяцев назад

I ordered this exact dust extraction from the same guy about a month ago. I still haven't received it yet. However, it was a pre-order for the Dewalt model I needed. I can't wait to get it. It's good to see that it's a good product.

@zvezdankorica574 10 дней назад

I don’t think it’s working on sliding cuts

@chuckmarch5552 2 месяца назад

The insert tape is a good idea but i discovered that the tape shipped with appliances is stiff enough to do the same thing. Love your work.

@paulzirker706 8 месяцев назад

Great video good ideas keep it up.

@Jacko539 8 месяцев назад

Really useful video. Thanks 🙌

@731Woodworks 8 месяцев назад

Glad it was helpful!

@RYwoodview 8 месяцев назад

It is also pretty easy to cut and attach a flexible sheet of something (rubber, vinyl) to enclose the rear of any miter saw to guide the dust up into the OEM chute. Each one will be different.

@philipwolf3619 8 месяцев назад

BRILLIANT ! !

@user-nx3zk5qi8t 8 месяцев назад

I wish the cordless dewalt had a depth stop. Dust collection is surprisingly good, especially with the Camvac attached to it. I need one of this sticks, had my first scary catch the other day, wow, the force was incredible

@MrSpzwd 8 месяцев назад

Using a blade with a negative hook angle, or at least a very shallow one helps improve safety too.

@TadTheTinker 8 месяцев назад

When you build your miter station, build a dust collection box behind it. Angle the box to a central point behind the saw at the floor of tge station. Atrach your dust collection there. Funnels all the dust to one spot.

@Guile2332 7 месяцев назад

Thanks man

@mikethorburn6374 8 месяцев назад

Check out the new FlexVolt DCS 781 it has a much improved dust collection set up that very much resembles the kit you bought, is also lighter, uses but just 1 FlexVolt battery compared to my previous FlexVolts 2 battery system but no 110v conversion pack. . Direct worm drive instead of belt driven, I should also mention for old renovation guys like myself the 18 lbs they shaved off of the saw is a blessing 😂

@JimE6243 8 месяцев назад

A zero clearance fence does a good job of minimizing tear out on my Kapex but, it raise havoc with the dust collection because the fence blocks or collapses the chute unless I keep it real low and then of course the tear out starts again. JimE

@doughoist 5 месяцев назад

Thanks again!

@Emang169 8 месяцев назад

Hahaha, I watch both of their channels. I also bought the DeWalt dust collection.

@theloudestyeller 8 месяцев назад

I bought a laser guide for my dewalt saw off amazon. That was a great investment.

@kevinshea4353 8 месяцев назад

I just installed that same dust collection kit on my DeWalt miter saw yesterday. A major improvement over the stock dust collection which is practically nonexistent!!

@marconiandcheese7258 8 месяцев назад

The other thing is that it makes the miter saw more compact. The dewalt is awkward enough with its sliding bars out the back but with the dust collection back there it is even worse.

@douglasvine2516 8 месяцев назад

Try changing the blade. You won't be as happy.

@MJLWoodWorks 8 месяцев назад

Much better content than all those "5-tools you need" videos. Thanks for the tips!

@bobbray9666 7 месяцев назад

Another addition is the Fastcap 10 Million Dollar Stick. Cutting a small piece of wood on a miter saw can be dangerous when placing your fingers close to the blade to shave off a little. The hold down stick allows you to firmly hold the piece and keep your fingers safely away. I've used mine a bunch of times. Last used to cut filler pieces to door hinge mortises when I turned a swing door slab into a barn door. I cut small shavings off of my blanks get them to fit perfectly. Not every mortise was the same.

@timmyers1006 Месяц назад

Another RU-vidr called those miter saw alters. Both ways are great.

@OneWildTurkey 8 месяцев назад

I've got an older model Ridgid saw that came with adjustable inserts. I thought that was standard now. Looks like they stopped providing something pretty nice.

@patrickstiltner1207 8 месяцев назад

Is there shop tour video? I'd like to see your entire shop and how it's set up.

@731Woodworks 8 месяцев назад

Yes there is, here you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NdYM6ayLlrg.htmlsi=IFm7AgZUoL6Y8sBr

@sittingindetroit9204 8 месяцев назад

I bought a small “pet tent” from amazon and mounted it on the back of my saw. 95% reduction. It looks like a pop up tent and is about 2x2x2. Just unscrewed the back screws I used to tie the saw to my table, slid it under the saw about an inch and put the screws back in. Reduction seen is with no vacuum at all.

@davordoit 8 месяцев назад

Just a regular telesop channel and that is what money does to man! Amen

@1943Fletcher 6 месяцев назад

Very informative videos!

@Tanktaco 8 месяцев назад

Shout out to the kickback.

@saulmartinez6498 8 месяцев назад

Are there any better clamps for a miter saw than the ones that come with the Dewalt Miter saw?

@OtterBeSwimming 8 месяцев назад

This is the best video I have seen you make, many useful helpful hints for a miter saw. I agree Shop Nation needs to develop a dust collection for Festool miter saw. Thanks for the information, I will be using these.

@theycallmemcgyver 8 месяцев назад

Great video😊

@731Woodworks 8 месяцев назад

Thank you 😁

@jimfeaster4837 8 месяцев назад

Good video I enjoy

@731Woodworks 8 месяцев назад

Thanks 👍

@justaguyonthefly 8 месяцев назад

Tip for people like me that only have have a cheap Mitre saw. Upgrade the blade to minimum 60 tooth. Slow down the speed of your cross cuts, you'll get much less tear out or use a piece of sacrificial board underneath. Even a couple strips of painters tape will help for zero clearance (for a few cuts)

@georgesidhom7344 7 месяцев назад

Awesome 👏

@williammaxwell1919 8 месяцев назад

#2 - adding tape for "zero clearance" you also need to add tape to the in and out feed otherwise the vertical cut won't be 90 degrees to the board

@ndo342 5 месяцев назад

Maybe, maybe not. I have an older Makita saw which has adjustable pieces on each side of the blade, so you can move them as close to the blade as you dare. But before I saw this video with the tape idea, I made myself some MDF zero-clearance inserts to replace the Makita ones. While doing this I noticed that the Makita pieces actually sat a little below the level of the rest of the "table". I thought that was weird, but now that I know about this tape, I think that little space would make the tape work out very nicely. And much faster to apply than how long it took me to make up some inserts.

@usablellc6735 8 месяцев назад

Great video as always. I purchased that zero clearance material but then became concerned that by raising the cutting area of the saw's bed slightly higher than its overall height and thereby introducing a slight angle to the miter. I use my miter saw for making picture so those angles really matter. What do you think?

@731Woodworks 8 месяцев назад

I haven't noticed it making a difference, but I'm not making frames. But, my DeWALT throat plate is slightly lower than the bed of the saw too.

@stevehopkins5907 8 месяцев назад

I was concerned about that too, but found that a business card is the same thickness as the zero clearance tape. When I’m really concerned about the accuracy of the cut I slip one under the material being cut. If I continue using it I may just put them on there with double-sided tape.

@jameseconleyjr7868 8 месяцев назад

Using the FastCap ZC on my DW definitely threw off my cuts a 32nd. Works like a charm on my table saw but I'm able to adjust the throat plate. Not able to do that on the DW.

@KyleHarrisonRedacted 4 месяца назад

I’m constantly finding myself cutting narrow material on my miter saw, setting up stop blocks and improvised push sticks just to keep my fingers away and hopefully not wind up getting shot in the chest or face with a kick back Thought about your miter sled, wondering if that’ll help me out

@jimfeaster4837 8 месяцев назад

Iyour right cmt and diablo are my favorite

@blog4getadream 2 месяца назад

Dude!! That Kevin James clip 🤣😂🤣😂🤣😂🤣😂

@kellyvcraig 8 месяцев назад

You don't have to build an entire sled. Many of us have been running electric miters for decades, so came across the problem with lack of support for small parts over and over again. With the zero clearance plate problem solved, all you need is Masonite backing attached directly to the stock fence. This not only solves the problem of lack of support for small pieces, it reduces how much material you have to use. If you use a bit thicker material. you can even inset mounting bolts in horizontal slots and relief cuts so the fences can slide left or right, allowing you to use the same back for 0-45 right or left.

@gigliowananomacon 8 месяцев назад

“I don’t hate it” “ you can take it home with you” “I will” Lol

@coolzerow 8 месяцев назад

When you’re mitering 90 cuts and fitting. I’m having issues with my cuts going down being little off angle because of my pull. Any solutions? Cutting aluminum

@Critter145 8 месяцев назад

6:43 Paul Blart. 💯🔥

@joserubenvega 4 месяца назад

Would you be able to do a detailed calibration miter saw video from a woodworkers point of view

@GaryNixonTX 8 месяцев назад

I placed an order from shop nation, asked for an update and got a snarky reply and still no dust collection

@marconiandcheese7258 8 месяцев назад

I saw the cmt saw blade on your daily deals. With shipping (possibly to Alaska is higher), a 80 tooth diablo finish blade is cheaper up here in Alaska. Is it good enough?

@731Woodworks 8 месяцев назад

Those are decent blades. I used them for a long time, cut good and clean. The CMT will just stay sharper, longer.

@731Woodworks 8 месяцев назад

▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next: How to Cut More Degrees with Your Miter Saw - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SS9oiLreUnw.htmlsi=U-jh2g8r6eafm333 Tools In This Video: Shop Nation Miter Saw Dust Collection Adapters - creatoriq.cc/3QX3R26 Fast Cap Zero Clearance Tape - amzn.to/3OQEVGI Colliflower ero Clearance for Kapex - amzn.to/45tkWVQ CMT Chrome 80 Tooth Blade (Amazon) - amzn.to/3Z7uNhL CMT Chrome 80 Tooth Blade (40% off at TayTools) lddy.no/1hueq CMT ITK Extreme (budget friendly blade) - amzn.to/3Ecyrgn 10 Million Dollar Stick - amzn.to/3YYY0v1 CA Glue I Use - amzn.to/3KWiK0G StealthStop Stop Blocks - amzn.to/45Mot0S Dust Extractor I Use - amzn.to/44uzanX Miter Station Built Plans - www.731woodworks.com/store/miter-station-build-plans DeWALT Miter Saw - amzn.to/45rUcEU Festool Miter Saw - amzn.to/47NVxrc Delta Miter Saw - amzn.to/45NizfZ 📲 Never miss another tool deal. Sign up for my Tool Deals SMS Alerts - NOTE: I text out tool deals so you don’t miss any! text DEALS to 1 (731) 207-7151 Be sure to add DEALS to your text to me so you get added to the proper list. You can also click this link my.community.com/731woodworks Important to add the word DEALS to the text! 🇺🇸 Join the Tubafour Nation on Patreon to get an exclusive Tubafour Nation sticker, access to exclusive member-only behind-the-scenes videos, member-only livestreams, discounts, and other cool member-only perks! www.patreon.com/731woodworks (If you use one of these Amazon and other affiliate links, I may receive a commission) Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter

@gneissly 8 месяцев назад

Have you used zero clearance tape with a table saw? I have a really cheap craftsman saw at the moment. Its throat plate is very flimsy and not zero clearance.

@CJCWoodWorking 8 месяцев назад

I have a dewalt 10" mitre saw. I have it set to cut a perfect straight 90 degree cut. But when i try to do a 45 degree cut (not mitre) it's not 45 degrees. i shift the handle over to 45 degrees and it clicks into its spot but it's not 45 degrees. I can't trust my saw to make a picture frame because the cuts are off. I actually made a giant wood square jig using my my square and it works perfectly for making the 45's I need. So now i only use my mitre saw to make quick straight cuts.