Welcome along again! It's taken a bit of time to get this first part of the video together, various reasons which are not at all related to the printer, but starting a family.
Rat Rig V-Core 3 - Why is this 3D Printer a game changer?
All comments are my own and not influenced by RatRig.
I'm really excited for you to experience the excitement of the V-Core3 its truly an incredible 3D printer and i'm having a ton of fun with it.
If you have any questions or comments please leave them below :)
Links:
www.ratrig.com RatRig VCore codes:
25OFFSAMPRENTICEV3 - NEW CODE 2021! Save yourself a few quid!
Polymaker Filament :us.polymaker.c...
EVA SYSTEM : main.eva-3d.page/
My Q&A RU-vid video • RATRIG VCORE3 Q&A LIVE...
www.sliceengin...?p=SyXQTKBnL
If you are in the EU or the UK order from 3D Jake as the import and shipping is horrible from the USA.
3D Jake UK bit.ly/3mp20DQ
:: Slice Engineering extruders::
Personal choice would be the Mosquito Magnum (30-35 mm^3/sec) The v6 is around (15 mm3/s.) or the Slice Engineering copperhead which comes in around (20 mm3/s)
Bondtech LGX or BMG-M again from 3D Jake
3D Jake International shorturl.at/knzGO
: Slice Engineering extruders::
Personal choice would be the Mosquito Magnum (30-35 mm^3/sec) The v6 is around (15 mm3/s.) or the Slice Engineering copperhead which comes in around (20 mm3/s)
Bondtech LGX or BMG-M again from 3D Jake
I use these heated beds on both my setups amzn.to/3CrK1SR :
3D Printer Silicone Heated Bed - 240v (AC Mains) heat plates - Multiple Sizes 300/400/500
SSR-40DA Solid State Relay Single Phase DC-AC Relay Input 3-32V DC Output 24-380V AC amzn.to/3jAvlIw (be careful where you obtain these from)
24v Meanwell PSU
I have ordered the Orbiter v1.5 also to test. www.ratrig.com...
KEY klipper features: www.klipper3d.... I've been really impressed with the input shaping and the skew settings. (Although mine weren't too bad)
Mike over at TT has a really solid video on input shaping so make sure you look around • Klipper input shaping ... he's also has videos on a step by step build, which was one of the reasons that I didn't do my own again very solid information.
My V-Core 3 setup:
400 x
Bondtech BMG- M
Slice Engineering Mosquito Magnum
E3D Nozzle X 0.4
PrecisionMaker Heated Bed
SSR-40DA Solid State Relay
BigTreeTech SKR 1.2 Pro (soon to be octopus)
TMC 2226 Stepper Drivers
Socials:
therealsamprentice
samprentice
/ therealsamprentice
ratrig ratrig v-core 3 rat rig hardware
14 окт 2024