Why We Won't Use Head Gasket Sealer in a Can | Jeep 3.6 Head Gasket Replacement 

Dorman makes a great all aluminum oil filter housing to replace that plastic turd they used. Fun fact.... Chrysler used to warranty these coolers until 2013. After that, they renamed the part a "housing", which isn't covered under warranty by either them, or aftermarket warranty companies.

I'm always learning something with you guys......thanks.

The more I hear about the 3.6s, I'm glad I have the older JK with the 3.8 other mini van engine, not a power house, but no major problems, then again it's Chrysler so some curve balls will probably be thrown at me in the future.😁

If memory serves, Red Devil is for clearing clogged drains 😂 Hope everyone at the shop has a happy holiday season! 🎄🥂🍻

There is ASU all over the head gasket. 🤣

Had to use head gasket sealer in my 2013 jk to get home on a long trip. Took the heads off when I got home. All the little round cooling ports in bank one heads were plugged. Sealed everything but the head gasket. Had to do a thorough flush several times before I put new heads on. DONT use that snake oil it will cause more damage. My lesson learned

You should have used Flexi-Seal. 😄

Just because they sell it, doesn’t mean you should buy it.

How many hours for a job like this?

Was that the lead singer of Flock of Seagulls sitting in the chair?

LOL, It's not the reason why many people use a pressure relief cap with a manual lever. Been using them for years on hotrod's and OEM vehicles. It makes relieving coolant pressure easier if there was a overheat issue easier to relieve the coolant system pressure than letting it cool down manually boiling in the system and potentially cause other issues such as a blown gasket. It is still a rated cap for what your cooling system calls for such as a 15lb cap. And will manually relieve that pressure when the pressure is over the rated PSI, same as a standard radiator cap. It makes releasing the pressure quicker and safer.

Blue Devil stock shorter confirmed 😂

That Samcrac guy should watch this vid. That guy always uses those type of “solutions” on commonly known engines that fail. 🤷🏻‍♂️ No idea why people try to short cut the inevitable.

I'm guessing you're not fans of putting a handful of dry rice in the radiator to fix leaks then. 🤣

You mean mechanic in a bottle doesn’t work or you get what you pay for? Only way to fix it is to fix it. Did it run ok after re assembly?

Look, you can do constant full repairs on ancient vehicles OR try a short term solution to give you some room to save and shop for a new vehicle. Constant expenses that may not be worth it or a cheap fix-for-now, your choice.

How much did you guys charge for a job like this? Asking for a friend🤣

music when words are needed. Words having nothing to do with anything.

Eh. Just take the head gaskets off. Makes things way simpler. 😁 /s

"One of these thigs is not like the other" one of them must be a pretender.