UPDATE: I HAVE CORRECT THE LOW AUDIO PROBLEM FROM THE ORIGINAL VIDEO. THIS SHOULD SOLVE THE PROBLEM MOST PEOPLE WERE HAVING. Cheers
This video shows how to solder a NAND-AID into a Wii U console with a failing or bad eMMC chip. This is a PERMANENT FIX to repair bricked consoles, consoles with errors: 105-0644, 160-0103, 160-2215, consoles with corrupt data, consoles that won't factory reset, consoles stuck in a factory reset loop as well as consoles that are stuck on the Wii U logo menu or freeze on the menu and finally consoles that freeze or error on updates to games or firmware. While other methods exist that seem to resolve these issues on Wii U Hynix based consoles, the other fixes are only temporary. This is the full installation from start to finish with commentary explaining what I am doing. I hope others wanting to do this repair find this helpful. Also this video and additional resources at my website should allow anyone to complete this repair, including those who have never done a repair like this.
A full written repair guide can be found at the following link:
www.tzirf.com/nintendo-consol...
Further resources for this repair can be found at www.tzirf.com. If you have any questions regarding your own Wii U repair head to my website and make a post. I will be happy to help.
0:08 Cutting Trace R26 to disable NAND
1:15 Ground Pad Prep & Soldering
7:21 Soldering Data connection to resistors
9:55 Soldering SD Card Slot
19:45 Soldering 10uf capacitor
23:55 Soldering 3V Wire
Music by: Bensound
License code: E1XUXBWZ2RGDGCNQ
27 май 2024
