No video :(

Window Tinting: How to Cut and Shrink a standard door

Подписаться 32 тыс.

Просмотров 55 тыс.

50% 1

Wanna help support the channel?
Shop Installation Tools!
- dryshrinkprep....
Shop Dry Shrink Prep!
- dryshrinkprep....
Donate to the Channel!
- streamelements...
--------------------------------------------------------------------------------------------------------------
Big shout out to our sponsors!
tintwiz.com/
There are many helpful apps and tools available, but most software out there are not designed to tackle the specific workflow and challenges that present themselves to tinters. Tint Wiz™ is a CRM app designed specifically for window tint companies. Book appointments, create proposals, send invoices, schedule jobs, manage tasks, and more.
dryshrinkprep....
We here at Dry Shrink Prep believe in long and healthy carriers in the tinting industry. Our Dry Shrink Prep is handcrafted with all natural ingredients that contain moisturizing properties, anti-aging properties, rich in antioxidants and much more. If you’re a health conscious person then this product just might be for you.
solarfxwindowf...
Solar FX Window Films offers one of the most extensive lines of Non-Reflective, Hybrid Metalized and Heat Rejecting Nano-Ceramic Automotive Window Films in the industry. Our window films are manufactured with the highest level of quality materials and are subjected to rigorous testing, both in the lab and in the field. Our goal is to ensure you get consistency and excellence in each and every box of tint you purchase. Our window films are not only an investment that provides the consumer increased privacy and comfort, they also help provide protection from the damaging effects of the sun and can help reduce driver fatigue and increase safety.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@dzznuts7580 6 лет назад

I've watched about 12 of these videos now and this is by far the best one..

@WindowTintingBusiness 6 лет назад

hopefully I'll have more in the mix that you like also!

@shawntester1640 5 лет назад

100% the best video I’ve seen! Just completed 2 windows that came out great because of this video!

@deltajohnny 6 лет назад

Impeccable pronunciation and very easy to understand, even by non-native English speakers like myself. Thank you very much for everything 👍👍

@briandanning 7 лет назад

I tried tinting my windows myself to save some money... spent $70 on tint and failed miserably on my first window then rage quit. lol Mad props to you pro's that shit's hard!

@jimmylloydjlloyd1876 4 года назад

I love how you explain each step thank you so much

@marcinbialobrzeski608 4 года назад

You are a great teacher mate!

@milneberovvbg 6 лет назад

Very helpful. With some of your tricks now i can install tint even better than before.Thumbs up for all of ur videos.

@WindowTintingBusiness 6 лет назад

keep it up brother!

@JosePerez-lh3dp 3 года назад

Your explanations are awesome! Love your attention to detail.

@Random-rt5ec 7 лет назад

Excellent video- great detail on how to properly cut to fit.

@ljellison1950 6 лет назад

Very good videos, I want to do my travel trailer windows and the videos that I watched were very good.

@fernandobautistalira3877 2 года назад

Gracias por los consejos, cuando cortan los redondeos sobre el cristal no se marcan o rayan ? Saludos desde 🇲🇽

@mobility63 7 лет назад

I use the same technique, except I use scissors to round the corners because there's always a possibility of scratching the glass when using the Olga. I use Global fims

@hoolywood07 6 лет назад

Use stainless steel blades only

@echologged85 6 лет назад

Good stuff! Thank you for sharing the videos. Cheers!

@bamowfazal5775 7 лет назад

Nice one bro

@grahamcharlton861 3 года назад

Brilliant video and knowledge. One question, how and why do some people fit film on outside of glass and others on the inside?

@Kaabosurron 7 лет назад

Thanks very informative👍

@WindowTintingBusiness 7 лет назад

Glad you found it helpful!!

@IAutoEnthusiast 6 лет назад

Very good. Thanks man

@adriancota7393 6 лет назад

Great job

@eddyj3821 7 лет назад

Can you do a video on how to cut rounded quarter windows like on a honda accord 2014? Trying to cut out the rounded part is what's challenging. Can't get a good round cut. Any tips would help, thanks. Very informative videos by the way!

@jorgevega238 3 года назад

Detailed video

@joev8275 3 года назад

If I have a 40 x 100 roll, let’s say the the 40 is the height and 100 is the width, is it ok to shrink it either horizontally or does it have to be vertically?

@joudomsouk 6 лет назад

I’m sorry if this was answered before, but what is the advantage to shrinking film? Most DIYers and beginners won’t have a heat gun. Do I absolutely need to shrink the film?

@WindowTintingBusiness 6 лет назад

Yes shrinking is necessary to avoid fingers and to have a good install. Plus window tinting is NOT a DIY thing.

@diegocebrian2125 7 лет назад

hi.....greatings from jamaica, love your channel. I have a question, i see you move the tint sheet to the right 1/4 of an inch so you can push it under the casquet when you install it... What happen with the botom casquet...... how much you give the tint to push it under and when you estimate it and actually leave it? Thank you

@WindowTintingBusiness 7 лет назад

+Diego Cebrian so I shift the film to the side a 1/4 of an inch so it leaves you an 1/8 on both sides, this you know. Before I cut the top of the window I line the bottom of the film with the bottom seal tack it down and then cut the top of the glass. I do this because when I install the film I leave a 1/8 gap at the top of the glass so the bottom of the film that was in line w the weather strip is now shifted 1/8 lower eliminating any light gap but at the same time minimizing the amount of film I have to tuck at the bottom during install. Sometimes the inside weather strip is lower than the outside and doesn't need to be tucked at all. Some installers like to at least tuck the bottom a bit. If that's you then before you cut the top of the window instead of lining up the bottom of thr film w the seal you just pull it down a bit. Just keep in mind the further down you pull the more you have to tuck which makes the install harder. Hope this explanation helped!

@deltajohnny 6 лет назад

Window Tinting Business, perfect and very clear explanation. Thanks a lot! 👏👏

@Whuckfisle 6 лет назад

Question I have is how is the film large enough from top to bottom to get underneath the bottom gasket using this meathod? I find most vehicles, the inside sweep is at least a 1/4 inch below where you cut on the outside

@WindowTintingBusiness 6 лет назад

If the inside gasket is lower than the outside (like in a ford pickup) then you can always pull the film down after you line up both sides just before you cut the top edge. Its preference if you'd like the film to be tucked below the inside seal or not, some tinters just go below the outside and as long as you give it enough time to cure then you wont have a light gap.

@sufiullasufi288 5 лет назад

How heat rear window

@kevinbaker1922 5 лет назад

What’s the difference from doing outside the window or doing inside the window I watch you video and you put the tint outside and the guy who did mine put the tint inside of the truck

@WindowTintingBusiness 5 лет назад

I'm hand cutting the film on the outside. This is part one of a two part set, the second video is me installing the film and that goes on the inside. All window film goes on the inside.

@christopherpowell3520 4 года назад

Hi my name is Chris Powell I have been tinting on the side since my school days. I started out using Gila brand tints out of part stores but I am looking to advance and use other brands which brand do you recommend and where to find it

@WindowTintingBusiness 4 года назад

Solarfxwindowfilms.com

@simonrahn9181 6 лет назад

Do you touch the glass when you cut with your blade, especially when doing the rounded corners? How do I avoid scratch marks?

@WindowTintingBusiness 6 лет назад

+Simon Rahn as long as you’re using a stainless steel blade, break off a fresh blade throughout and don’t use a lot of pressure (just enough to cut the film). You can still scratch the glass w a stainless blade but you have to use a lot of force. Avoid carbon blades, those are more sharp and a harder metal so it will scratch the glass.

@gerryn167 7 лет назад

what do you do if you are using a heath gun to get out the fingers and the keep comin back no matter how much you try get them out?

@WindowTintingBusiness 7 лет назад

+gerry nail 2 things will happen #1 it'll lay down flat #2 the film will melt. Make sure your hear gun is set at a high enough temp. And make sure you're shrinking in the correct direction.

@dnawrapsatl 4 года назад

How many hours to do a standard 9 window 4 door sedan? People say 4 hours but i think thats alot of time for a pro correct me if im wrong

@simplybuilt_1708 4 года назад

4 door sedan can be knocked out in less than a hour

@sttm1283 7 лет назад

when cutting against the glass, do you use any special angle or special blades so you dont scratch the glass?

@WindowTintingBusiness 7 лет назад

I use a NT red dot pro knife and I only use Olfa blades, specifically stainless steel blades. DO NOT USE Carbon blades (I believe the olfa carbon blades are Black in color). Carbon blades are too strong and too sharp, its very easy to score the glass w carbon blades. In regards to my angle I keep the back of the knife as low to the glass as possible with out dragging the knife (not the blade) against the film.

@Not_nice718 6 лет назад

What’s the feedback on tints window after 2 to 3 Years

@joev8275 3 года назад

What do you mean liner Side out, and film side in?

@gav6808 3 года назад

The film has a liner side and a tint side.So basically it has 3 layers the tint,glue and a backing sheet/liner side.

@Nodirm93 6 лет назад

What if fingers keep pops up while shrinking ?

@WindowTintingBusiness 6 лет назад

use more heat to shrink them down. If it ain't glass its ass.

@cheatsyaddolli7026 6 лет назад

which squze use shinking time

@iclashroyalez1225 5 лет назад

Wat brand of tint do you use

@edgargonzales4210 7 лет назад

Hello, What kind of film are you using? Thx

@WindowTintingBusiness 7 лет назад

+Ed Barber in this video I'm using Maxpro but I prefer Johnson (Marathon line) just using up the last bits of my inventory.

@mikep03 6 лет назад

How easy is it to scratch a window with your knife??I am temped to try it.

@WindowTintingBusiness 6 лет назад

Easy if the blade is dull and you’re pushing hard to cut the film but forget it could etch the glass.

@Pbabyjoker 6 лет назад

What's your go to tint brand?

@WindowTintingBusiness 6 лет назад

LLumar for now

@robh23a1 6 лет назад

The spray you use is it just water?????

@WindowTintingBusiness 6 лет назад

Mostly water with Johnson’s baby shampoo

@qhongnguyen 7 лет назад

What other services do you offer at your business besides tinting?

@WindowTintingBusiness 7 лет назад

qhongnguyen headlight and tail light tinting, emblem black out w plasti dip, I'm going to be learning how to install PPF (paint protection film). other good ones is vinyl wrapping rims.

@qhongnguyen 7 лет назад

I am going to start training tomorrow for window tint. How long does it take to become efficient in window tinting? Where do you go to learn new services?

@WindowTintingBusiness 7 лет назад

qhongnguyen a solid 6-9 months in a shop for me. But everyone's different. some are quicker & some are slow.

@qhongnguyen 7 лет назад

What are the "bread and butter" of our industry?

@WindowTintingBusiness 7 лет назад

qhongnguyen window tinting is the bread and butter for me. But I think offering other services is good for business to diversify it. that way you can fill your void time w other services. detailing is another good one too! exterior and interior detaing.

@alend175 7 лет назад

Dont you have to shring the top as well?

@WindowTintingBusiness 7 лет назад

No you do not. The process in this video will eliminate all fingers

@Mad-Man84 4 года назад

Why do all these cars you tint guys heat shrink be easy cars to heat shrink, can somebody heat shrink something more challenging like a Ford crown vic or a Grand marquis, thanks in advance

@edgargonzales4210 7 лет назад

suntek

@WindowTintingBusiness 7 лет назад

I haven't used suntek enough to give my opinion on the film.