Window won’t go up ?How to manually roll up stuck window in car. 

I just want to say thank you for this video!!! I’ve been trying for hours and watching non stop videos since my window stopped working last night it’s finally up until I get my new motor in two days

Hell yeah! Good deal bubba. Works with ease. Perfect detail to description.

Demand that manual overrides for all power windows and doors be required by law...

Felipe, even though it did not work as you were expecting, your effort and all what you showed to us is enough for us not to feel intimidated with it to try that ourselves. That is what is important. I do appreciate your video. I will also try to lubricate both grub sides to see and check the ends. The motor of mine does not work in mine and i refuse to purchase a third motor.

Wow! Thanks so much. This is the answer I've been searching for.

This is why I prefer crank windows

The real youtube channel!😆💯 Thanks Man!

You just saved my day/week! Thank you so much!

Thanks for the video. Now I know how to manually roll up stuck window in car..

Thanks a million Bro I'd give you a thousand likes for this video very helpful mine was stuck for 2days after seeing this I sorted it out manually now I can sleep in peace

Worked!! Thanks!

Thanks. This worked!

Thank you so much super easy and u explained perfectly without all that putting on a show

Thanks for the information! Been a big help! Have a Blessed day! 😊❤️🙏🏻📖🙌

man I'm having this problem and you just saved me thank you

I LIKE THIS.its the easiest i have seen

Goat. Thank you.

Thank you bro you saved me big time

Exactly whay i was looking for. A actually manuak way to make the regulator go up. Thanks. You helped more than all those other videos combine. Straight to the point. Thankd again.

Thanks man !

Finally got it up, I believe it is the regulator. Tha nas for your help

Thanks, brother.

Thanks man! I need to do this toy truck!

Thank You a Million time's 😊

Thank you bro

excelente thank you!

TY, ILY.

I wish the Kia Sorento (2013) used a similar squared 3/8" drive socket, that's genius of Nissan. In a pinch you can at least easily roll it back up or down tell you get a new motor. The Kia Sorento has a splined round shaft connection.. I know you were using a camera, but I suspect if you lift up on the glass while ratchetting it would go up more easily. Also, I think you were right, the guides were probably dirty and needed to be cleaned and re-greased. The motor looked like it was working perfectly. My old 98' Honda Accord used a scissor lift mechanism where you have to get the glass to a certain level, to remove the glass screws through access holes, then hold up the glass with tape, and then wind down the scissor lift, and pull out the scissor lift that's almost too large for the opening.. I honestly don't know how I would have replaced the motor scissor lift assembly if it was stuck up.. the motor was at the bottom of the door and hard to reach.. This center motor arrangement with winding wires around a shaft is a better solution, only the motor need to be replaced. Thanks for the video.

Pretty cool video man, first video I've seen what this technique. All the rest of them to show you to use a paperclip to manually power the window but it doesn't do you any good if the motor doesn't even work. Lol

Thanks

Thanks bro you just saved my whole life my guy

Mine has a gear ⚙️ setup. I had to take the motor apart and I stuck the drive shaft back in the actuator then turned it by hand. Couldn’t get a wrench or drill in there but it worked.

Thank you

Good tip til get my motor replaced

So I could have done this the entire time instead of taping my window shut

i noticed my passenger window was stuck so i was pulling it up while holding down the window up button until i heard a loud crack like something breaking so i stopped messing with it and taped up the gap only to find out that the child safety button on my car was on causing all of the windows to stop functioning so i turned the safety off and the passenger window went up when i pushed the button.. moral of the story, check your child safety settings first before trying to use brute force to almost break your window like i almost did.. kinda nervous some plastic piece snapped down there

Awesomeness³

How do you manually roll up a window in a Chevy Malibu 2008 I was gonna paint it I took the doors off already I would have to hook back up the electrical system to roll the windows up and raise up the trunk which I should take the trunk off before I paint it and I need to take to open the trunk to remove the lights too.

Omg finally now I know!

❤❤❤

I'm not sure it it's going to work on my cat but thanks for the idea. I'll respond again if it does.

WOW , I KNOW AN EASY WAY TOO WHEN U OPEN MOTOR HEAD IT SLIDES OUT & U CAN EASILY PULL WINDOW UP OR DOWN

Woulda done this if the window wasn’t all the way down😂😂

So it can be done.Unfortunately my Seat Cordoba does not have that square hole on which to turn the regulator,the Seat has a 'toothed circle hole' so I will have to make a bespoke wooden piece to insert into hole to turn.

I need to do this on my 97 Nissan 200SX. The power window motor crapped out on me 2 days ago

Need help? Turn the ignition to the first position so the car is on but not the engine.. Hold the switch to make the window go up, then open the car door, still holding the switch, then close the door, still holding the switch .. Repeat this as many times as necessary.. It took me about 3 open/closes of the door then my window finally went up.. Still not working? Try short bursts on the switch instead of holding it down.. Hope this helps someone else

Vz commodore passenger window wont go up how can I put it up

Help me with my 2013 charger thanks !

It's all the way down, but the motor works. I believe it's off track

I have an 02 accord, the motor works but the window is I think off track. It's in the down position. Any solution to this?

Hey i have a 2012 g37 do you think i could roll the window up like this?

My window is all the way down is it still good to do it

thank you. i HATE doing this. what an annoying project. fuck this window. thanks for the help. ugh!!!!

on the 2003 Camry, you need to buy a torq socket piece to get those 3 bolts off. ANd, it doesn't seem to have the same parts, so can't get the window up that way. 🤥

Man, I wish I had seen this before I took my door panel apart and still couldn't get the window to go up. If I had, I would have put the window locks on the passenger doors,( because the window went down with ease, but not back up) & I could've avoided a $350 regulator replacement bill. Oh well, u live & u learn.

Damn I have a magnum worried this won't work doorpannels off but idk where the regulators at

my regulator is screwed to a metal panel on the door that cant be removed :( its in the way so wont be able to dial the window up even if i got the motor off

The wire to mines was jamed so I just cut it with wire snippers and pushed it up. Quick fix until Thursday, then I'll have to replace the whole assembly.

WHAT DOES THIS HAVE TO DO WITH WORLD WAR COVID-19?

Is this a 04 sentra 1.8?

There's no holes in my door to access anything!

Yoo

Jesus Loves You

Thanks