WIRELESS LAN TEST FROM 1.0 MILE AWAY!!! Adalov CPE360 wireless network bridge 

I was quite impressed as well, was not expecting it to work as good as it did. Good luck on your project! Definitely worth the money for an application like yours. Thanks for watching for for your comment.

@@shanesdiy Thank YOU for sharing! So excited for this project.

12V @ 1A for the DC jack.

Just curious, does this device have a "24V" spec for POE? A device may have, for example, a 12V power input and a POE ethernet port. However, if it supports POE, that doesn't mean that the POE voltage supported is 12V (though I'm assuming you probably know that). To be absolutely sure what the device can use for POE voltage, check the POE standard that the device supports, such as 802.3af, 802.3at, etc, then look that the POE injector/switch supports that standard. Most POE devices will accept a range of POE voltage all the way up to 48V-56V, unless it specifically states a POE voltage max of I.E., 24V. If you're using power at a remote location and you have a POE injector/switch already that's 30-60V POE output, you can use a Linovision "POE Splitter-1224". It takes POE input, then splits to a standard RJ45 1gbit data port, with both 12V or 24V DC output selectable by a dip switch, allowing you to power a device like this bridge directly through it's 12V power port. Of course there's various routes depending on what you want to accomplish, such as 24V POE to 12V DC splitters. Or just use a cheap buck/step-down DC driver if you simply want to drop non-POE 24V DC from batteries down to 12V DC, and those are like $5 on Amazon.

@@matthewmarshall3808 Thank for sharing your knowledge, interesting stuff. Here's what I have on this equipment. The manual states the Power requirement is ">/= 3W" which is only 0.125 @ 24V, I did not measure it's power consumption to confirm this. The POE input requirement says "POE 24V-1A" and the POE power adapter they include is only rated at 24V @ 0.5A. The DC jack requirement "12V 1A" and I did run one of the modules during testing with the DC jack @ 12V. Never noticed any power related issues but didn't measure current draw in either mode.

There's usually some overhead booth ways, power output of a transformer and power input rating of a device. Can usually get away with some difference when it's a low power device. Looks like it's working well. This video surprised me. When I watched I had no idea they were doing this good at a mile in this price range. How did you end up choosing this one, do a lot of research or did you just try one and get good results? I have a 3/4 mile long driveway and this has me thinking of all kinds of new uses on the property!

@@matthewmarshall3808 The company contacted me to test and review it. First and only one of its type I've tried. I was also impressed and surprised. I was honestly ready to call BS on the range claims but it clearly worked!

Email is in my about section for the channel.