Wood Lathe Speed Woodturning Wood Bowls Video

Подписаться 89 тыс.

Просмотров 63 тыс.

50% 1

Lathe Speed Woodturning Wood Bowls Video
Determining a proper lathe speed can be a bit of a challenge when turning wood bowls. If you started turning spindle works, you'll want to pay extra attention to this video, because spindles are not bowls.
Turning too fast with a wood bowl blank on the lathe can be the recipe for disaster. However, on the other hand, if you're turning too slowly then the bowl gouge will have a difficult time making a smooth cut on the wood surface.
We'll cover all aspects of wood lathe turning speed in this video.
______________________________
********** TOOL SHARPENING eCOURSE for WOOD BOWL TURNING
turnawoodbowl.com/courses/too...
______________________________
EQUIPMENT USED
1/2" Bowl Gouge - amzn.to/38UqQmp
_____________
If you are curious about, or already completely addicted to turning wood bowls, check out my website dedicated to the art and craft of turning wood bowls!
www.TurnAWoodBowl.com
____________________
Turn A Wood Bowl is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
_____________________________________________________________
Online Turning Courses --- turnawoodbowl.com/courses/
Website --- turnawoodbowl.com/
My Publications --- turnawoodbowl.com/shop/
RU-vid --- turnawoodbowl.com/RU-vid
Instagram --- turnawoodbowl.com/Instagram
Etsy Shop --- www.etsy.com/shop/RelivedWood
Pinterest --- turnawoodbowl.com/Pinterest
Facebook --- turnawoodbowl.com/FaceBook
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK - Sign Up Free
turnawoodbowl.com/tips
_____________________________________________________________
*** TOOL SHARPENING FOR WOOD BOWL TURNING - ONLINE COURSE
turnawoodbowl.com/tool-sharpe...
_____________________________________________________________
*** WOOD BOWL TURNING Start-to-Finish - ONLINE COURSE
turnawoodbowl.com/courses/woo...
_____________________________________________________________
#woodturning
#woodworking
#turnawoodbowl

Хобби

Опубликовано:

30 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 244

@jimrose4596 4 дня назад

You have the best videos on the net! Your examples and discussion of the difference in spindle vs. bowl diameter have good variety for folks who "get it" differently. For me, a math/physics trained engineer, I think in tangential velocity so your comment about 11 MPH vs. 60 MPH tangential speed is how I get it. That's the speed the tool sees when cutting or scraping which, after safety, is what I see as important and your demonstration of the bowl gouge on a slow turning push cut really brought that out!

@TurnAWoodBowl 12 часов назад

Well explained Jim. Thank you, and Happy Turning!

@andyshoff1545 Месяц назад

8:30 am.....I have to admit I'm just getting started in this craft and you seem to have a video about every question I seem to have....Thanks so much for sharing your knowledge

@TurnAWoodBowl 18 дней назад

My pleasure, Andy! Yes, I too had all these questions. ;) Enjoy and Happy Turning!

@user-ix2cu1pi8e 4 месяца назад

Very useful and well demonstrated video.

@radiationroom 2 года назад

One of the best instructional demonstrations ever! A must watch for any woodturner.

@TurnAWoodBowl 2 года назад

Thank you kindly, Peter! All the best to you and Happy Turning!

@jameswinslow9911 5 месяцев назад

Well done. Very appropriate

@craigraper2911 3 года назад

Sure wish I would have had this great insight 11 years ago when I started. Thanks Kent

@TurnAWoodBowl 3 года назад

No worries, we all take time to learn! It's all good Happy Turning!

@ericeinsmann5559 27 дней назад

Very helpful! I was given a Sears Craftsman lathe circa 1977.. It has a pair of 4 step pulleys and you have to move the belt to change speeds.. The SLOWEST speed is 875 rpm.. I haven't tried any bowls yet.. But it doesn't look like I'll be able to do anything very large.. Not safely anyway.. I do have an idea that might help out. It would involve adding an extra pulley and changing out the original belt for 2 shorter ones. There would be a jackshaft bar and pillow block bearings. The motor would have a 2 step pulley. The jackshaft bar would have 2 pulleys on it.. A 2 step to go with the motor pulley and also the 4 step pulley to go with the spindle pulley. All pulleys would be mounted inversely from it's matching pulley so that the speed would change when either belt is changed . Essentially, I would be stepping the speed down twice.. I'm hoping it will allow me to do bigger bowls.. Thoughts anyone?

@michaelogden5958 3 года назад

I'm no pro, but I've produced several pretty nice bowls with a fairly wide range of woods. I learned the basics by watching RU-vid videos. I don't recall any of my "heroes" dwelling on RPMs. It was pretty much "if things start to feel a little sketchy, just slow it down a notch". So, for me, the RPM readout was pretty much irrelevant. Later on I watched some of those speed demons turning out nice stuff and decided to try it out. Screaming speed turning is definitely not for me. I could do it, but it took out the relaxing, satisfying feeling I get from turning. So, yeah... my RPM indicator isn't something I pay much attention to. Cheers! :-)

@TurnAWoodBowl 3 года назад

Right on. Happy Turning!

@alanhayes6323 2 года назад

Very helpful video really getting down to the science and safety aspect of wood turning.

@TurnAWoodBowl 2 года назад

Thanks, Alan. Yes, I feel it's pretty important to understand the why as opposed to someone just saying "don't turn too fast." All the best to you and Happy Turning!

@4gregcollett 10 месяцев назад

Thanks for all the info here. I've watched tons of "how to turn this that or something else". This is the first that's taught me the how and why.

@TurnAWoodBowl 10 месяцев назад

Glad it was helpful, Greg! Yeah, I'm a big believer in knowing why you are doing something. Being told, "just do it THIS way" isn't so fun. LOL All the best to you and Happy Turning! Kent

@Vet6970 Год назад

Great advice, thanks

@timguernsey8030 Год назад

Excellent tutorial for a very new guy in lathe work. Looking forward to the next video. Thank You.

@jarmstrong2843 3 года назад

Another great video as a reminder for safe turning speeds. Thanks, Kent!!!👍 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@TurnAWoodBowl 3 года назад

You're so welcome! Happy Turning!

@cookandclimb2742 3 года назад

1000th like!

@TurnAWoodBowl 3 года назад

Boom! Thank you! Happy Turning!

@stevefromlondon9175 Год назад

Great advice as always Regards Steve UK London

@stevenhansen8641 3 года назад

Thanks Kent,another great video.

@TurnAWoodBowl 3 года назад

Glad you enjoyed it. Thanks and Happy Turning!

@arielebrooke5246 Год назад

Thanks Kent, I really appreciate seeing your video on safe speeds, you deliver the message really well and with a lot of passion. I haven't made a single bowl, or anything for that matter, on a lathe, since high school :), but hopefully I will now that I am in retirement! I built a home made varibale speed lathe, but safety is the first rule of order, and you are starting me and others on a the right path regarding that most important rule. Thanks again. John P. P.S. That picture is my wife. She looks better than me:))

@hughcawley473 3 года назад

Congratulations, Kent - I wouldn’t have thought it even possible to record an interesting 30 minute explanation of lathe speeds (where the answer, after all, is “get the speed just right”) was possible, but you did it. Really helpful and memorable. You’ve a real talent for this stuff (that sounds much more patronising than I mean, sorry, but it’s a rare gift!) and I thank you for it. Best from the UK. Hugh

@TurnAWoodBowl 3 года назад

Thank you! Not patronizing at all. I appreciate your kindness! Happy Turning!

@keithkimsten5111 3 года назад

Thanks. It's nice to hear explanations as to why rules we all just learned by experiencing the wrong way of doing things apply... LOL. My mentor who was from Denmark would show me the correct way then said, you'll understand the wrong ways soon enough. Little mistakes become big problems. A lot of my lathe work back then was in process to Pewter spinning prototypes for designers who drew renderings that they wanted made in pewter to sell to the manufacturers. Now, sense retirement came, wood turning is just for fun. 👍👍👍🍻

@TurnAWoodBowl 3 года назад

Excellent. Turning pewter must have been fun. No drying and reshaping of a final turning. ;) I like the quote "little mistakes become big problems." Thanks and Happy Turning!

@walonguy111 3 года назад

Your videos are the best, informative, well produced and most of all educational. Great job Ken!

@TurnAWoodBowl 3 года назад

Thank you so much! Happy Turning!

@jimwheeler6131 3 года назад

Another fantastic help for us turners in training!

@TurnAWoodBowl 3 года назад

Thank you! Great to hear! Happy Turning!

@drgmackenzie 3 года назад

Next level effort using a drone for that overhead shot! You're a great teacher, thank you!

@TurnAWoodBowl 3 года назад

Thank you. Glad you liked that. ;) Happy Turning!

@dduncan221 11 месяцев назад

Thanks for sharing enjoyed your teaching. Great job on expanding the correct speed.

@TurnAWoodBowl 10 месяцев назад

Thank you, D. Happy Turning! Kent

@terrrywilliams3617 3 года назад

I’m so glad I found your site Kent. You are one of the most informative guys I’ve seen. A true teacher. I’m just a novice type of turner and never had any type of training on the lathe. Mostly spindle turning but an occasional bowl. I only have a little belt driven lathe but like you said common sense plays a big part. Again thank you so much for all the great information you provide.

@TurnAWoodBowl 3 года назад

Thanks for being so kind! All the best to you. Happy Turning!

@skyflyer2494 3 года назад

I really appreciate the enthusiasm and effort that you put into teaching us the skills and safe operation of bowl turning. My first experience with wood turning was 44 yrs ago in middle school. Until recently when I lost my job I hadn't been able to do any turning and I had forgotten everything that I had learned. It is awesome to watch your videos and learn all over again from what I know and see you are looking out for us and our safety as well as teaching us the skills to become a successful wood bowl turner. Again thanks sincerely Steve Y. From New Mexico

@TurnAWoodBowl 3 года назад

Thank you for writing and sharing your sincerity! Yes, I want you to be safe and get the most out of wood bowl turning! All the best to you! Happy Turning!

@pjseiber2774 3 года назад

Great video, full of great info. Thanks so much

@TurnAWoodBowl 3 года назад

Glad you enjoyed it! Happy Turning!

@josephwise485 3 года назад

Great explanation. Thanks for sharing.

@TurnAWoodBowl 3 года назад

My pleasure! Thank you!

@user-yy7dt8ef6i 4 месяца назад

Very helpful!! I turned my very first bowl yesterday and I knew it was to slow but wasn’t sure how fast I could go. Thanks for the equation and the indicators to look for!

@TurnAWoodBowl 4 месяца назад

You are so welcome! Happy Turning!

@mitchellmanning7887 3 года назад

OMG,,best video on speed I’ve seen,, thanks for sharing

@TurnAWoodBowl 3 года назад

Wow, thanks! Much appreciated. Happy Turning!

@randolphtorres8101 3 года назад

THANKSGIVING

@TurnAWoodBowl 3 года назад

Happy Turning!

@randolphtorres8101 3 года назад

@@TurnAWoodBowl would love to but the Berryessa fire took all my tools, this is the longest i’ve been away from wood it drives me nuts.

@qapla 2 года назад

Great video, Kent. It all made perfect sense. An idea ... for your outside demo of walking around the pole, you should have two people go around the pole at the same time so it would demonstrate that, while the person neat the pole only walks around the pole, the one 10 steps away would be running at a quick clip to keep up - would give a true visual of what you were explaining. Looking forward to watching more of your videos.

@TurnAWoodBowl 2 года назад

Great idea. Thanks and Happy Turning!

@burnleyize 3 года назад

You are an excellent teacher. Now that I have started turning in earnest, I have almost 50 roughed out bowls in various stages of drying. 10 are just now ready to finish turn, so the magic will soon happen. And I thank YOU and a couple of others for the fantastic information and knowledge.

@TurnAWoodBowl 3 года назад

Wonderful! You are very welcome. Thank you for your kind words. Happy Turning!

@josephsabo9253 3 года назад

Great info and explanation. I've got a better understanding of the role speed plays in turning bowls

@TurnAWoodBowl 3 года назад

Glad it was helpful! Happy Turning!

@tkishkapesilurian4281 Год назад

I learned from your videos and started from slow and slowly build speed as the balance is perfected. The highest I have ever run my lathe on a bowl was about 800rpm on a 6" bowl. My 10-12" bowls never run faster than 650rpm. That speed allows a smooth cut and a shaving action produce a surface that is good without sanding.

@nathansackett6899 3 года назад

Great information. Like the emphasis on safety 👌. No reason for a person to get hurt doing something they love.

@TurnAWoodBowl 3 года назад

Exactly! Happy Turning!

@kennethcaine3402 6 месяцев назад

Great video, one thing that happens in turning bowls and you have a blank vibrating and you increase the speed and the vibration goes down is that you were first running at a Critical Speed and when you Speed it up you go past it. All machines have a Critical Speed with a bowl blank added to the lathe it changes the Critical Speed, and if you put a heavier or lighter blank that Critical Speed will change. Thats the science of why speeding up the lathe and the vibration going down. There is a lot of information out there on the subject, I just wanted to touch on the subject because it seems strange that this actually happens and seems like something strange or mysterious is going on. That's one reason every bowl blank is different.

@saeedabadi1148 3 года назад

Very informative!!!

@TurnAWoodBowl 3 года назад

Glad it was helpful!

@joslynstuff 3 года назад

Just prior to this video i had a bowl leave the chuck at full speed. It hovered for a nano second like a gyroscope then shot out of the garage under two vehicles across the side yard and stopped at the neighbors fence. I now have the belts set to a max of 900rpms with an after market speed control that will slow it right down to nothing. Thank you for helping me not kill myself.

@TurnAWoodBowl 3 года назад

Oh Wow! I'm so glad you are ok. That speed controller will do the trick and now that you know what to do, I hope that doesn't happen again. Happy Turning!

@huutuan 3 года назад

yes i like lathe i can do what i want out of wood😍😍😍😍

@TurnAWoodBowl 3 года назад

Right on!

@stanberryk 3 года назад

Great video Kent. In your demonstration it reminded me of when I was a kid and they had merry-go-rounds, if you got in the middle you might be going same speed but their wasn't as much pull. But if you hung onto the outside you didn't feel you were going as fast but the force was greater, and more fun.

@TurnAWoodBowl 3 года назад

Thanks for sharing. Excellent point. Remember how "death defying" it was to hang on the outside bars? LOL Happy Turning!

@emilkvicktube 3 года назад

thank you, very helpful

@TurnAWoodBowl 3 года назад

You're welcome! Happy Turning!

@williambuckley1185 Год назад

Thanks Kent, good things to know.

@TurnAWoodBowl Год назад

You are very welcome William. Happy Turning!

@alainnoel_tourneur 3 года назад

Hi Kent, thank you very much for another exceptional video. The safety issues addressed are vey useful. It also gives good rules of thumb to use as safeguards and describes problems I had faced in the past. Have a good day

@TurnAWoodBowl 3 года назад

Glad you enjoyed it. Thank you and Happy Turning!

@martinvandevoort2266 3 года назад

Great information, thank you,

@TurnAWoodBowl 3 года назад

Glad it was helpful! Happy Turning!

@LS-fm2zt 3 года назад

You are an outstanding teacher. I always learn a great deal from your videos.

@TurnAWoodBowl 3 года назад

Happy to hear that! Thank you and Happy Turning!

@B16nobby 3 года назад

Very informative i have learnt a lot from this vid Thanks.

@TurnAWoodBowl 3 года назад

Glad to hear it! Thanks and Happy Turning!

@mackmay5442 3 года назад

Great video, I kind of knew some of the speed vs diameter ideas but you made it quite clearer to me how to get rid of the tear outs. I have been a woodworker a long time but just recently taken up turning. There are lots of things I still need to learn. Thanks

@TurnAWoodBowl 3 года назад

Hey Mack, fantastic. Yes, I think we all intuitively know when the speed is "right" and when it's not. We'll all learning together. Happy Turning!

@beebob1279 3 года назад

Dad was a wood shop teacher. He taught me the lathe when I was little around 11. He taught me about too much speed and turning a bowl. This was a very good review as I'm going to start turning again. It's a different lathe than what was in the garage. With the old lathe we had to stand on a rubber mat or we would get a little shock. My new lathe is grounded and has a variable speed control. It'll be fun getting back to what dad and I did years ago

@TurnAWoodBowl 3 года назад

That is awesome! Wow, "a little shock!" LOL That'll keep you on your toes! ;) Happy Turning!

@Mortalis2 3 года назад

Kent, I subscribed a while ago and have learned quite a bit from your teachings. I too have watched that "famous" bowl turner who says that life at bowl turning begins at 1300 or 1600 rpm (?) and will advocate turning as fast as possible. I have always turned as fast as the lathe will not vibrate which ironically has been, according to the pulley speed illustrations on the inside of my pulley section, under 1200 rpm (I do have variable speed on my Delta Midi). I have tried to turn faster but, the as you call it, intimidation factor does set in. Thank you for supporting my desire to only turn as fast as I sensibly feel is safe. Safe turning to you.

@TurnAWoodBowl 3 года назад

I hear ya! Be safe and Happy Turning!

@ronaldkramer2138 3 года назад

Thanks Kent your Videos or on the money, this will really help me..Ron

@TurnAWoodBowl 3 года назад

Glad to hear it Happy Turning!

@anneturner2018 3 года назад

Your tutorials never cease to amaze me! I have been turning for about 2 1/2 years and have never been taught that this could be the cause of a rough looking cut. I am been mentored/instructed by many woodturning professionals, who are excellent turners, but this is the first time I have been made aware of the speed being a possible cause of an uneven cut. It has been very frustrating, particularly when I know I am riding the bevel yet it isn’t smooth (and I am told it is because I am not riding the bevel properly). Thank you again!

@TurnAWoodBowl 3 года назад

Glad this helped. I have another video coming soon about tool marks. Stay tuned. Happy Turning!

@stephenmowbray.7165 3 года назад

Thanks again for great advice, I’ll be taking a little while longer as I have no controller I have to change the belts it’ll take a bit longer but I’m shaw I’ll get there,so thanks again and I’ll be watching as always.

@TurnAWoodBowl 3 года назад

You're very welcome. Use the slowest belt rpm speed, which will give you needed torque as well. If you use relatively well balanced bowl blanks to start, you should be fine. Happy Turning!

@kenkaufman4736 3 года назад

Thanks for the information. How about a video on sanding speeds. There seems to be different schools of thought in that regard.

@TurnAWoodBowl 3 года назад

Great suggestion! Typically sanding speeds are much slower than turning speeds. Happy Turning!

@andremaire4770 3 года назад

L'o

@tomcoker9882 3 года назад

Kent I took your challenge when I bought my dream lathe. It wasn’t by choice though. You see I bought myself a Robust American Beauty and even though I asked Brent and Deb English when I was going over my build if I could get a speed readout they said one was not available. Brent assured me I wouldn’t find it necessary. To my surprise, I don’t. Thanks for the tips. Stay safe and well to keep the videos coming. Cheers, Tom

@TurnAWoodBowl 3 года назад

Thomas, yes it's true, the RPM readout really isn't necessary. And I think it can be dangerous if it's relied more than paying attention to the bowl blank. Thanks for sharing. Happy Turning!

@lawrencedoucette1011 2 года назад

Excellent video. Merci !

@TurnAWoodBowl 2 года назад

Thank you, Lawrence!

@benyviaene7317 3 года назад

Nice explanation , 👏🏻👏🏻👏🏻

@TurnAWoodBowl 3 года назад

Thank you! 😃

@alanandkarenrouse747 3 года назад

A great video Kent! I haven't taken the challenge yet.............well maybe I have and didn't know it. I am a "self taught" turner. By that I mean I have not taken a formal course in turning. I have over time decreased the speed of my bowl turnings for exactly the reasons you mention. Thanks for the info and as always I learn something every time I watch one of your videos.

@TurnAWoodBowl 3 года назад

Awesome, Thanks for watching! Happy Turning!

@bobjr7208 2 года назад

I was a skilled trade machinist for 43 years and got back into woodworking again a couple years ago. My lathe has a variable speed split pulley system which works fine. It simply has a handle and dial which shows the "approximate" rpm, which I really never look at. My years of experience running many different machine tools has taught me how to gauge the proper rpm myself by vibration, sound, sight, or feel. You are correct when you say that an rpm gauge is really not needed for proper operation, and you can get a better "feel" for the correct speed by trusting your gut.

@TurnAWoodBowl 2 года назад

Thank you, Bob! Thank you for writing and sharing! I think we're much better off being more attentive and trusting ourselves more often. ;) All the best to you and Happy Turning!

@briandorton9302 3 года назад

Thanks enjoyed the video

@TurnAWoodBowl 3 года назад

Glad you enjoyed it, thanks. Happy Turning!

@RickTurnsWoodturning 3 года назад

Good video, Kent!

@TurnAWoodBowl 3 года назад

Glad you enjoyed it thank you!

@feetachemail 3 года назад

Great video! I learned most of this by trial and error and wish I'd seen this before I started turning a few months ago. It would have saved me a considerable amount of difficulty. I don't have an RPM readout. I adjust the speed by 'feel', if that makes any sense. When I hit the sweet spot, so to speak, everything just feels and sounds better as I'm turning. And where that sweet spot is depends on the type of wood, the balance, etc. Thanks again for your videos!

@TurnAWoodBowl 3 года назад

It sounds like you are right on target with your lathe speed. All the best to you and Happy Turning!

@danhoke2110 2 года назад

Thanks Kent. I’ve been too dependent on my digital readout and will try out your challenge.

@TurnAWoodBowl 2 года назад

Excellent, Dan! All the best to you and Happy Turning!

@randolphtorres8101 3 года назад

Good job young man!!

@TurnAWoodBowl 3 года назад

Thank you! Happy Turning!

@fishenbyfaithoutdoors2589 3 года назад

Thanks for the info.

@TurnAWoodBowl 3 года назад

You bet!

@DeeplyStill 3 года назад

Really great explanation. Being new to turning I was starting to be of the opinion that I should just turn as fast as I can but I can see the logic, and the 9000/bowl diameter formula is really useful. Thanks. Great video

@TurnAWoodBowl 3 года назад

Glad it was helpful! With bowls you don't want to go that fast for safety sake. Happy Turning!

@deanweeks7956 3 года назад

Great information. Too fast means your tools dull faster. Thanks again for the great information.

@TurnAWoodBowl 3 года назад

Very true! Thanks and Happy Turning!

@peacefulpandascreations8785 3 года назад

This was excellent information presented in an understandable way. Thank you. One thing I don't think you mentioned was that different chucks also have limitations on speed as well. I look forward to taking your challenge as soon as I can get back into my shop.

@TurnAWoodBowl 3 года назад

Great point! Yes, Cole Jaw chucks in particular should not be turned at maximum speed. Check with each manufacturer because they do recommend not to exceed certain speeds. Thanks and Happy Turning!

@hsbsolutions 3 года назад

You have just explained what speed is all about. Your the Man. Brilliant

@TurnAWoodBowl 3 года назад

Thanks. LOL I appreciate that! Happy Turning!

@debbiekorwin4000 3 года назад

This explains why I’m better at spindle turning!🤭. I’ve had the speed way too high for bowl turning and now I know why my bowls were flying off the lathe too often😬😟thanks for the great info as usual!You make such professional videos and they are crystal clear!👍

@TurnAWoodBowl 3 года назад

Happy to help! Happy Turning!

@WithTheGrain527 3 года назад

I wish I'd found you earlier Kent! Now I see how many bad habits I have!

@TurnAWoodBowl 3 года назад

It's all good. Thank you! Happy Turning!

@bobcarter8203 2 года назад

Bob C, Clovis California. Tree to bowl.

@TurnAWoodBowl 2 года назад

Thanks for entering! Happy Turning!

@matthewharvey8755 3 года назад

Wish I had this video 5 years ago when I was first turning. I had a walnut beer mug fly off and give me a concussion lol. I did have a proper hard face shield which I believe saved my life. 1400 rpm was way to high... Not to mention I was using Cole jaws with half inch stoppers. Bad choices all around lol. But live and learn! (I should of used a jam chuck/long nose jaws and about 600-800 rpm) I have had a few concussions in my day, so I didn't sleep for 6 hours afterwards. Cheers

@TurnAWoodBowl 3 года назад

Sorry to hear that. Concussions are a painful way to learn, but they work…usually. ;) Be safe and Happy Turning!

@matthewharvey8755 3 года назад

@@TurnAWoodBowl yes sir, and will do. Getting a new set of chisels ordered today 😁 I'm like a kid on Christmas haha

@TJMahoney57 3 года назад

Your videos are the best!! I've only been turning for a year, so I'm a rookie, and your instruction video's not only help be a better turner but also inspire me to keep learning more... Thank you!!

@TJMahoney57 3 года назад

I only use the rpm readout as a reference, not a guide.

@TurnAWoodBowl 3 года назад

Awesome, Rock on! Thanks for sharing and Happy Turning!

@JunkMan304 11 месяцев назад

I learned this the hard way also as many others have. The ER Doctor said he could not figure how I managed to not require facial reconstruction surgery. Bowl came apart and the largest chuck hit me square in the chin. I don't remember shutting the lathe off and going in the house. Wished I had seen this video beforehand. Great video!

@TurnAWoodBowl 11 месяцев назад

Yikes! I hope you have healed ok. Glad you now have this info. Don't give up. Turning is safe if you follow the handful of rules and guidelines. All the best to you and Happy Turning!

@JunkMan304 11 месяцев назад

@@TurnAWoodBowl yes all is good now but I am nervous about trying a bowl again. I am going through your videos trying to rebuild my confidence and I can say it’s definitely helping. Thank you so much for all of your helpful advice and tips. I have learned so much already and some has even helped me fine tune my use of tools for other turnings. I really appreciate you!

@Brian-tb1zs 2 года назад

I need to slow down ! I started turning with spindles for lamps and candlesticks going 1500 rpms +, I definitely have been trying to turn bowls too fast. I bet my bowl quality is going to be much better. Great video, excellent information delivered in a way that is understood, Thanks for all the work put into these videos 👍

@TurnAWoodBowl 2 года назад

Glad to help Brian. Yes, and you'll avoid some potentially serious incidents too. All the best to you and Happy Turning!

@markschmitz4891 3 года назад

Great Instruction. I have two Craftsman lathes. One old, one newer. Both belt driven. Slowest I can go is 875. Next speed is 1275. I now know why I am having so much trouble. Looks like I need a new lathe.

@TurnAWoodBowl 3 года назад

Glad it helped, be safe and figure out a way to get those speeds down. Happy Turning!

@jimmyhowell996 Год назад

Liked the information. My lathe is belt driven with a step down pulley. But I'm thinking about upgrading. I would want one to make up to 16 I ch bowls.

@mikefinley4367 Год назад

Just the info I was in need of. Thinking of turning banjo rims and any advise you may have is appreciated. Just starting to research si you might be a goldmine of info.

@briangustin3745 3 года назад

Like all the 5 other videos or so on turning speed, I keep thinking "Blade Tip Speed" - as a lawnmower tech, I found it important for liability reasons to be able to set that properly (governed engine speed) - way I learned it was through the use of Pi - The ratio of circumference to radius - so, an engine at 3600 RPM, with a 19 inch blade, for example, blade may be travelling at 18,000 feet per minute, or 300 feet per second.. - So I always wondered why someone talking about bowl turning speeds didn't simply do the (very simple) math using Pi (multiply your diameter by 3.1416 to get circumference, then multiply that result by the RPM to get inches per minute, which you could use , or then divide it by 12 to get feet per minute , then divide by 60 to get feet per second) Although I see in an earlier comment someone else mentioned similar, as well as the rotational inertia mass (which goes without saying.. the G forces created by that speed, in other words) ... That might help explain why the gouge cuts better/faster on outside and slow down feed rate as you move in .. But - this was probably one of the better explanations/demonstrations of the idea...

@TurnAWoodBowl 3 года назад

Yup, what he said! Ha. And you're right about the different cutting qualities on the outside and inside of the bowl. Thanks for sharing! Happy Turning!

@peted.7237 3 года назад

Great video as always, your videos always give me a confidence boost when I am unsure of something. Do you plan on doing a video on turning an end grain bowl? The grain orientation makes it quite different and I have actually yet to do it. Hopefully soon I get the chance!

@TurnAWoodBowl 3 года назад

Thanks, Pete! I may do an end-grain video at some point. Stay tuned.

@dennisbarney869 2 года назад

In spindle turning will a higher speed assist in less tear out. working with pecan making rolling pin.

@TurnAWoodBowl 2 года назад

It can help, but if the fibers are weak or brittle it might not help. Use shellac to tighten the end-grain right before the final passes. Happy Turning!

@brical1176 7 месяцев назад

I'm relatively new to turning. I've been at it for about three years...started with pens, moved on to small bowls and small vases. It's therapy for me. Three hours and ankle deep in sawdust is time well spent. I love the video. My lathe doesn't have a digital read out so i kind of go by feel, vibration, and comfort level so this video is very reassuring. Do you apply the same thought in regards to sanding or is it also the blank youre turning? Thanks for the help. Ill be looking at more of your videos..can use all the help I can get.

@TurnAWoodBowl 7 месяцев назад

Thank you, and yes, I do have a video on sanding. Check it out. Happy Turning!

@paulruud5804 Месяц назад

A friend just got a Robust lathe and he gave me his old Powermatic 3520A, which has no RPM readout. So I am starting out just as you suggest. I also have to replace the VFD, but that is another story. It might be helpful for people in a similar situation to understand that a VFD is not machine specific. One doesn't need to buy the original Powermatic VFD for a replacement. Indeed, that is an inferior VFD compared to the newer ones available today. I have seen so much handwringing abou this that is unnecessary. TMI perhaps. But definitely related to rotational speed on a lathe. 🙂

@DennisSuitters 3 года назад

Great information Kent, as always. I think a lot of people forget, or don't realise that the readout is based on the spindle speed only as that's where the sensor is and not an indicator of the overall speed of the work piece. Thanks for sharing.

@TurnAWoodBowl 3 года назад

Great point. Thanks and Happy Turning!

@clarencegreen3071 4 месяца назад

I believe the term for this used by most trades people is surface speed. Machinists use this a lot. It tells how fast the metal is going past the cutting tool in feet per minute or some equivalent units.

@laurencebugeja4160 3 года назад

Very interesting lesson about the turning speed. Is this also applicable for sanding speed. Thanks for your response thanks.

@TurnAWoodBowl 3 года назад

Yes, absolutely Thanks!

@Johnsonturning 3 года назад

You should talk about harmonic balancing. You can turn the speed up past the shake. When you want a clean cut, Speed is your friend.

@TurnAWoodBowl 3 года назад

Correct, on occasion. I'd rather help everyone know the limit and turn safe. Yes, you can go a bit faster and some times smooth out a minor vibration, agreed.

@matthewharvey8755 3 года назад

That would be an intermediate/advanced video lol. This would of been perfect for me when I was first starting out.

@scottfarnham2717 3 года назад

Good video Kent! Does the "rule of thumb" formula for spindle rpm apply to glued up laminated or segmented bowl blanks too? Thank you!

@TurnAWoodBowl 3 года назад

Yes it does, more so. Actually I'd turn them at a slightly slower speed, just fast enough to make a clean cut. Happy Turning!

@ddcd53 3 года назад

If you want to see what can too much speed can do, type in ( wood lathe fail hits man in face) Then you will see what Kent is talking about. Thanks for the video. Dan

@TurnAWoodBowl 3 года назад

Thanks Dan, I'll take your word for it. I don't like watching some of those crazy videos. LOL

@Dutchshedwoodshop 3 года назад

very nice one! i killed my lathe yesterday with the project that i upload to youtube tomorrow... need to find a new better one!

@TurnAWoodBowl 3 года назад

Good luck. Check out my lathe review on www.turnawoodbowl.com

@Caasi67 3 года назад

Great video! How do you think about speed when it comes to scraping?

@TurnAWoodBowl 3 года назад

Thanks and a good question. The speed setting should be about the same whether you use traditional tools or scrapers.

@piaffesavvy 2 года назад

Good info! Now I have to run down to my shop and check the speed on my lathe. I'm not very good about changing the speeds since I don't have a variable speed lathe and have to move the belt for speed changes. I suspect I have it running too fast for some things. :-(

@TurnAWoodBowl 2 года назад

Great. I'm glad you'll know now. All the best to you and Happy Turning!

@FilosophicalPharmer 3 года назад

Years ago, enjoyed mountain biking lots and lots more after removing my speedometer :P

@TurnAWoodBowl 3 года назад

LOL Happy Turning!

@danepowell3128 3 года назад

Come on Kent. Be honest! You use a Hollywood production company to produce your videos don’t you? LOL. I never thought I would experience someone using a drone to demonstrate wood turning!!! Seriously, that was a great video. I do have a readout but usually only look at it to confirm my decision if a speed. That’s video was a great way to start a weekend. Thank you!

@TurnAWoodBowl 3 года назад

LOL, oh you have me laughing. LOL I never thought I'd find a legitimate use for my drone in a wood turning video. LOL Thanks for your kind words and a good laugh to start my morning too! All the best to you!

@stumorris5902 3 года назад

You channel is so educational for a beginner so thankyou. On the subject I don't have a variable speed lathe. Your Maths say I should be turning an 8" Purple Heart blank at 1125 however I have a speed choice of 1000 or 1400. Would you suggest airing on the side of caution and running 1k? My 3rd ever bowl turn was a padauk bowl which I roughed at 700 then turned at 2k (I'd seen a video stating faster=better) but I used Carbide, however after studying your videos on bowl gouges I'm determined to get better with traditional tools

@TurnAWoodBowl 3 года назад

Stu, Faster, with bowls is NOT better, but more dangerous. Try to not exceed 1,000 rpm.

@stumorris5902 3 года назад

@@TurnAWoodBowl I swear by your 9k/diameter rule and then round down to the closest slower speed. Also purely through watching your channel I am using a bowl gouge every time, so thankyou!

@seacaptain92 2 года назад

A great video, but how do I compare your variable speed number 1, 2 3 etc, to RPM for those of us that have a lathe with fixed belt RPMs?

@TurnAWoodBowl 2 года назад

Great question. Well spindle turning speeds are very fast. In general, on a fixed speed lathe you want to have the belts on the slowest setting. Also, that slower speed usually provides more torque which is great for bowl turning. Hope that helps. All the best to you and Happy Turning!

@jamesrbrink9645 3 года назад

Good Morning, Kent! This was a great video. I’m wanting to start wood turning. Could you suggest a good starter lathe and tool? Thank you and have a great day!

@TurnAWoodBowl 3 года назад

Yes, absolutely. If you want to turn bowls, essentially any lathe that has a 6" swing or larger (that's the distance from the headstock to the lathe rails). See this article about lathes turnawoodbowl.com/wood-lathe-review-compare-select-understand-2/ The Jet 1221VS is a great lathe to start out with. And I'd recommend starting with traditional turning tools, a high-speed steel HSS 1/2" bowl gouge and a sharpening station like the Oneway Wolverine System should come first. I have two courses that will benefit you greatly - Tool Sharpening for Wood Bowl Turning and Wood Bowl Turning Start-to-Finish are both online check them out here turnawoodbowl.com/courses/ and will teach you absolutely everything you need to turn wood bowls. All the best to you! Happy Turning, Kent

@jamesrbrink9645 3 года назад

@@TurnAWoodBowl Thank you so much for the information. Have a great day and I’m looking forward to your next video.

@geneshipman3341 2 года назад

Hi, like your videos a lot. I’m just starting to turn and am using carbide tools. My bowl blank’s are 4”-5” in diameter. Based on your formula of 9000/bowl diameter that would give a turning speed of 1800 to 2500 rpm. That is well above your guideline of 1000rpm. What do you recommend? Gene

@TurnAWoodBowl 2 года назад

Hey, Gene. I'd keep the pieces under 1000rpm or lower than any unnecessary vibrations. Happy Turning!

@northernwesty 3 года назад

i'm inheriting a lathe from my father in law. no idea what kind of controls it has yet, so that'll be interesting. Hopefully it has a variable speed control, or can be retrofitted to have one

@TurnAWoodBowl 3 года назад

Best of luck and enjoy! Happy Turning!

@mikeyakey8315 3 года назад

Wow! Talk about going 180 to what I've been doing. Last week I turned six bowls over five days without a mishap. Now that was horseshoes!

@TurnAWoodBowl 3 года назад

Fantastic. Glad to hear! Happy Turning!

@mikeyakey8315 3 года назад

@@TurnAWoodBowl Happy SLOWER turning!

@jackgetzler3451 3 года назад

I have a pos import with the old non electronic variable speed the slowest rpm is 720 and I can only move the speed control handle about half way anymore and it sounds like it's going to come apart about 1000 rpm this was going to be a temporary lathe untill I retired about 2 years but became disabled 2 years before retiring so I didn't get to upgrade

@TurnAWoodBowl 3 года назад

Jack, it sounds like you're in the market for an upgrade. Hopefully you disability isn't too limiting. Perhaps take a look at Robust's Scout lathe. It can be adjusted to turn while you are seated. All the best to you and Happy Turning!