Worst Body Work I've Ever Been Forced To Do! (Matt's Secret Samurai) 

Every time I hear Robby talk about a new hood for the Samurai, I'm reminded of Matt's "it's temporary until it's not" line.

I've been a fan of Bosch tools for decades -- that stack made me drool. You're a lucky man, Robby

I can see the pain in Robbys eye doing that halfway body work 😆

I love how Robby's "shit" body work (that he's vocally critical of) is better than many "professional" shops work.

You are in for a treat guys. I've never met a Bosch ANYTHING I didn't like. From wiper blades to saws to grinders, to nailers and everything in between... EVERYTHING they touch is top-notch! Consider yourselves blessed.

The most entertaining channel on RU-vid. And you never really know what to expect.

Beginning in 2014, GM debuted a 4.3L 90-degree V6 for the Silverado trucks based on the LS engine architecture! The engine is a direct injection engine running 11:1 compression and rated at 285 horsepower and 305 ft. -lbs. of torque

Hillbilly reminds me of a friend that passed away a few years back. I love all y'all's content, thanks for sharing your lives with us.

you guys are super fun to watch, thanks for all the effort you all put in for our entertainment.

I love my Bosch tools. I have Dewalt and Milwaukee as well. Where my Bosch tools really shine are with the angle grinder, and the hammer drill. I just never burn up the bearings and they just keep working and working and working.

Guys, you're channel (and lives) are about to blow up... Word of advice; don't ever get too polished... It's being real people that has us all tuned in. I'd love to see you get bigger than diesel bros and that's saying something... Mad respect that entire crew but especially the Dave's

I like how you use MORR's theme music while working on his Samuri.

Bosch had a good rep here in the UK many years ago, well before you could get other well made/known brands. Couldn't say what they're like now but I'd be happy to use them.

I love seeing you guys wip out these super useful tools that none of the other guys have. Seems to make these jobs go by way faster.

You will NEVER find another Hillbilly!!! What a great guy. Every once in a while, you’ll get to work with a friend. This makes working so much better. Plus you can trust that your interests are aligned. It’s nice to watch you two together, especially if Demeri is not around keeping you two out of the hospital! I really enjoy your videos guys.

The V6 out of a Sidekick was popular engine conversion here in the UK on those Suzuki's.

Hey Robbie little tip/trick of the trade - when using a bender such as the jd2 or jd32. You never use center of the bend to measure always find the tangent line...you can find that by finding where the bend starts on each die, use some grease on the die and bend a couple peices of tube… you will notice where the bend starts, mark that on each die. each die will always have a start of the bend…- Mark it and then measure. Once you figure that out it’s easy. Also always start from the middle and go out. But using your tangent lines as markers for bends. Typically each tube and die size i always pre made a pre bent 90 and a prebent a 45. With my tangent lines marked it was super easy to measure out tubes, bend starts and so forth. Once you see on the die where the bend starts I typically would put a grind mark on the die. It wont move. So you can always line your marks up as such. If that makes sense.

Okay being a Chevy enthusiast I appreciate the love we give our Ford friends & Hillbilly is a great guy his Broncstar deserves the same love a man's passion is not to be messed with it's the eb & flow of a good life, Matt's little Suzi need's a Chevy tritan V6, that hood is a real gem lol, great video thank's for sharing ❤😉👍

I use bosh tools (drills, impacts and grinders) love them ,i have used for about ten yrs and they still work well, haven't had to replace any yet.

I've got a full kit of Bosch Blue and I love it. You have to be careful with the impact drivers because even the small one will break screws. In fact, I use my Bosch Green 18V impact gun for wood screws because it is powerful enough without being too powerful. My favourite is a big corded router which never stalls and has micro adjustment. I'd like to get a smaller skill saw if I can work out which one works with the Bosch guide rail. I have a big 18V skill saw, but it's a touch heavy for some jobs.

The bender looks professionally built. Great job Robby and Hillbilly!!!!

Good vid, love the bronco build and the Samurai. Would be cool to see a full resto vid, even a bunch of short clips cut together explaining from sand blaster to final paint. What grit sandpaper, what coats of paint, how many coats of paint, type of bog used, all the tools needed and related to doing a back to bare metal resto from a body work perspective (not rust repair)

Happy to see more progress on the bronc☆. When it's all done, you should do something crazy with that mini van.

Nice to see some progress on the Bronc-Star AND the Samurai!! You guys are awesome!!!

Always onward and upward. Much respect for everyone.

Another enjoyable episode of Robby and Hillbilly's adventures! Thank You for sharing/creating/teaching/entertaining.

Rear crossmember could be 8” pipe tubing. Seal the ends and Voila 🎉 you have an air-tank. The round profile of the pipe helps you ease over obstacles also.

Used Bosch for years. The carpenters line of tools are spot on. Very nice tools.

It is coming along very well there. Can't wait to see more videos soon my friends. Keep up the great craftsmanship and hard work my friends. Fab on. Weld On. Keep making. God bless.

Good progress on both projects . Thanks for sharing .

Love the video, Hillbilly is doing a great job he wants to learn as much as he can. Robby you are a great teacher keep on going. Hope you made up for the valentine

In piping/tubing, you call the outside ends of the bends "straight flanges". A great rule of thumb is to make the straight flange the same length as the nominal dimension as the pipe. So a 2" 45° bend would have 2"SF. If you get into the habit of cutting the straight flanges of your templates the same lengths all the time, you will have a nice sharpie mark where the transition between the bend and the straight sections occurs. That will make measuring the straight sections between the roll cage bends super easy to reproduce, and you won't ever need to calculate the arc lengths. Another tip is to use cardinal angles for your bends (except for the ones that have to be specific). So start with 30°, 45°, 60°, and 90°... And when you want more, add 15°, 22.5°, and/or 10°. Those are generally the bend angles that are used to make things when a design layout is done on CAD. That's when you need to figure out when the bend length represents the centerline, ID, or OD. Arc length = 2π(bend radius)(bend angle/360). Easiest way to fab is cut segments with one bend, and start long, so you can cut them to length just before welding. BTW, tubing is used more than pipe for roll cages because easier bending/less expensive because thinner wall, and because the nominal OD is the nominal size of the tube, unlike pipe. That makes figuring out the bend radius a lot easier.

Oh my gosh,, you are all so much fun to watch!

Changed to Bosch last year when everyone went red or green yellow etc. Good stuff,hope you received the brush less . Dont know a thing about sand paper.

@Robby Layton, I think you're going to like the Bosch stuff especially if they threw in a few 4A and 8A core 18v packs and fast chargers in there. I have a lot of them and feel that they are underrated in the tool world; good, reasonably powerful, reliable tools that get the job done time after time deserve their place on our workbenches. The ergonomics and balance of their tools are great, I really like the precise trigger speed control and gyro/accelerometer feature of their drills. (If your bit grabs, the power cuts out and brake kicks in before the drill can swing and do any damage at all, much less throw you off your balance if you're working at height.) But my favorite of all is their one handed reciprocating saw; a mighty beast in a small, easy to maneuver format that fits in tight places.

Bosch has decent stuff, their brushless lines on a lot of the drivers and impacts are great. They have less mechanic specialty tools, they seem to focus more on the construction side of things. The newer CORE 18v batteries are awesome for the big draw items like the angle grinders and stuff. I really like their 12v impacts and mini recip saws though too.

Bosch tools are awesome and my favorite to buy!!! Hope you enjoy them as I do!!! Big shout outs for the Bosch tools. Everytime you use them💪💪

Sure getting excited about the Wrecker games. I'm sure everyone will be videoing for those of us that can't make it. My husband can't get off due to staff shortage- hopefully he only works 16 hours today. Hope everyone from visitors to participates have a great, safe time. We'll be watching from Oklahoma. Stay safe and GOD bless

Love seeing progress on your projects. Thanks for sharing

WHEN BENDING TUBING WITH A JD SQUARED STYLE BENDER, MAKE SURE THE WELD SEAM IS FACING UP!!!! That way you are not asking the welded seam to shrink or stretch. With the weld seam facing up, it is placed on the neutral axis.

Hillbilly is one of my favorite RU-vid personalities. He's authentic and f'n hilarious. Just goes to show anyone can make it! Great job with the videos. They're just plain fun!!

Lots of interesting projects going on, Robby and crew. Nice work growing your channel! Seems to me, you and your team have that "special sauce" needed to be a successful You Tubers! Good stuff to come, I'm sure!

Robby I was watching the latest Broncstar build video and I saw your battery powered mobile bender it's Cool! but for the Battery you should be using a Lithium Ion car type battery 100 Ah the reason is that lead acid type batteries only can put out about 50% of their available power whereas the Lithium type go closer to 95 percent they have an incredible run time. Lot's of them available on Ebay. They are more expensive but well worth it also they make higher current small chargers for either type. The faster the recharge the more work can be done.

Bosch power tools are the best I've ever used. So solid and powerful.

Great video and great job with your truck and Suzuki good work God bless from GA and stay safe 🙏

Milwaukee cordless, but all our wired tools are Bosch and they are great. Use Benchmark abrasives, there a great company!

When I was doing body work, depending on the dent we used the drill and screw pull method, but we always welded the hols. That was someone with no tools, but a lot of bondo!

Here near Gainesville Raceway the Gatornationals usually make finding a Room a little more difficult that is also the weekend of Wrecker Gamers 9th,10th & 11th. We live within 10 miles of raceway so our issue is more family calling to stay over, but having 40 acre farm we dont mind, Harbor Freight has a Portable Solar Charging station complete with Solar panel

just a heads up when matt says its only temporary, like its gonna get fixes properly later....means its not gonna happen and what you are doing will stay on it for years and years or until it brakes

You are A heck of a boss doing that for an employee even if he is paying you are doing a wonderful thing God Bless young man

I agree with Hillbilly on the bronco 2 being a sweet offroader if built correctly. But Hillbilly i personally think a built cobra jet between the frame rails would be sick

Hi guys, awesome video , as usual> Many years ago so memory is vague but I worked for a steel company and we used to use a lot of bender machines and there is a relatively easy formula for getting any bend in the right place to the millimetre, I can't recall the numbers now but I am sure with a bit of searching the net and you'll find it. We used to to twist and bend Rebar and though it might not look it Rebar had to be accurate to the millimetre! Also of course pipework for all kinds of applications domestic and commercial so as clever guys like your selves it should be no problem.

I love my JD2 model 32!!! I added the HarborFreight air over hydraulic to it!!

Robby Layton's channel was already Awesome,, Add in an old Suzuki Samurai and its Pure Gold!

BOSCH Set You Up Great & They Do Make Quality Stuff, & The Bronco Star is Going To Be A BEAST

@ 15:18 Robby confirms that this will be "the first annual Off-Road Wrecker Games" !!!! It's now on record.! Of course the pre-show hype/news seems to indicate a lot of interest.

Have you got the proper clearance Clarence? Love that this is turning into an off-road build channel 🤘

I'm pretty sure that Flex drill has the "Anti-Kickback" feature that stops it when it senses the bit binding. My Dewalt has the same feature and when you change to a lower gear the thing will break your wrist, I found this out the hard way because I keep the male code of conduct alive by not reading the instructions!

Great video. Nice seeing Bud!

"We're shade tree engineers, we do what we think is right." Absolutely hilarious!!!

Might want to pick up some conduit to make test bends with as you are bound to make some mistakes while learning how to make stuff with the bender. It’ll save you time and money, especially when doing multiple bends that aren’t all on the same plane.

' .. and I never even knew that Bosch made tools! ..' 😂😂

Loved today's video. Thanks for sharing

Since this hood is shot, you can spray some paint on a Milestar and roll it across the hood. Use tire tracks as a replacement for the stripe.

Yo. Robby. I Love America! Such a pleasure watching the lads invent, fabricate, and resolve. Well Done.

You'll LOVE Bosch power tools!

Ask Paul about bending a roll bar. You measure, mark, bend, then it's too wide so you cut it and splice it in the middle

This just shows how dedicated Robbie is to doing the best job he can in the day we live in most people would be happy to do a half a@& job cause nowadays people just don’t know what hard work is

Matt showed in a recent video, the footage of Robby taking the Samurai, so he knows you have it 😂

Cool stuff, I suggest yall compare a factory finish vs Robby finish

The subpar bodywork hurts my brain. I'm sure the subpar work hurts your heart and soul Robby. Keep doing what you are doing

Love your content 😁. The editor is awesome. I used sia abrasives for years in metal polishing and loved the product 👍. Keep up with the awesome videos.

It's going to be a 50/50 paint job. Looks awesome from 50 feet away or at 50 miles p/h.

Love the SIA abrasives stuff! Try the sponges...they rock!

Guessing that you will like the Bosch tools, the quality of their manufacturing and assembly is great - really tight tolerances. The only thing to be aware of is that Bosch doesn't make copy cat tools. Quite often their controls will be a little bit, sometimes a lot of bits different than other tools made for similar tasks. Often times there is an improvement made that will allow you to do something quicker, better more efficiently, but sometimes it will just be Bosch being different just because they're Bosch - sort of like what Mercedes and BMW do with their car builds - especially engines. Playing with new tools is usually awesome, have fun! 😃

Need to use a cheese grater to cut down on the sanding of the Bondo. Might want to invest or ask a sponsor for a portable vacuum system that would significantly reduce the amount of dust from sanding the Bondo. You guys completed a lot of work that wore out this arm chair critic. Good job.

I did the same thing used a log splitter type ram and 12v hydrologic pump off a power pole puller truck it's sweet and I can bend things mobile.

How do you young bucks know so much? and you guys have mad skills. Thanks

Straight honest reviews!

I bent a little roll bar tubing and used some half inch aluminum fuel line to make a pattern and also an angle finder.

Almost everything I own, minus my 12V Milwaukee chain saw is Bosch. I don't know if they make an impact strong enough for what you do but otherwise I suspect you will love them.

Another awesome video. Oh yeah we want to see Dinner !!!

Wow Robby i totally heard that /s "Yeah great idea." 😇

Robby, you might want to get a smart charger for your bender. It can help refurbish batteries that sat a bit too long and make them work again. Temu has one for about $18 with free shipping. I personally have a Peak telligent charger, and it brought back a battery that had some voltage, but after 24 hours, it put out 13.8v

Gooood morning yall wishing everyone a blessed and humble sunday with love👊🙏😎

Do my Samurai next, I boshed up my job totally. Guy at paint shop told me just put some holes and self tapping screws... It popped out!!!

“……big mess…….” Yep that sums up the bronco quite nicely.😃

Get a hold of trailtough out of Medford, Oregon they carry everything for Suzuki's

Winning a car door down in the desert is perfect! If it gets hot you can just roll down the window

Robby, it's hard to make a silk purse out of a pig's ear, but if anyone can put some make up on one, you guys can do it! And we are glad to hear that the thieves who stole your brother's stuff have been identified and now face justice! Looking forward to seeing Hillbilly's Bronc Star come together, and seeing your new Jeep off road build come together! When is Dinner coming back? We miss seeing him!

I wish i could afford to go to the offroad wrecker games , this Marine just cant afford it but that would be awesome trip .

Yes they do! I want a v6 LS for my Scout..

That samurai looks like it was trashed and thrashed before Matt got ahold of it! Dang! Must be hard not being able to do the amazing job that you're used to.

Aww nuts. I've got surgery on March 8th and ill be recouping during that time. Can't travel so I'll miss the banana door. That bites. Good luck guys.

Pinocchio's nose on the thought that your wife would rather be in the shop on Valentine's day then elsewhere. Caught you Robby Layton!

Robbie you need to box the frame on the Bronc stars to help prevent flexing

9:05 so much room for a coyote swap😮

Hey there Robbie you should layout your design of the tube on a place on the concrete floor or flat table

It’s great to see hillbilly try out body work! It’s perfect to learn on that type of work instead of a customers car but I’m sure he would do good on that too with your guidance while he learns

I saw you using a dynabrade air die grinder. I love their grinders and sanders.