X-Pro X24 [$2800] 250cc Motorcycle - My First Amazon Street Legal Bike & Fuel Injected! 

One thing I don't see enough riders doing is to rev-match the downshifts. Simply blip the throttle as you've pulled in the clutch, downshift, and when done correctly, your RPMs will match the lower gear. It's less wear on the entire drivetrain (inc the clutch), and frankly, it's just the correct way to use all manual trannys.

I recommend starting all fasteners by hand before tightening with any power tool.

Great review! Thanks! I have been riding since the early 70's and have a Harley now. But that is not how I started! My first real bike was a 72 Yamaha 200 twin cylinder two stroke with similar issues seen here. What the previous generation of bikers taught me was that they are machines and as such are not perfect. If one buys a motorcycle, that is your bike now. Instead of whining about it's imperfections, get to know your bike by riding it and fixing or making adjustments accordingly until it runs as it should for WHAT IT IS. Your imperfect review, and you admitted it so at the end of the video, still actually told me most everything I wanted to know about the bike, so don't be afraid to do more of these. Those of us who have ridden for a while understand and appreciate the effort! Despite the perceived anomalies, this appears to be a great beginner bike for someone willing to look after it or a superb kick around bike. Anyway, thanks for the review!

I was learning on chinese 250 cc bike and mine was also a pain in the ass to put in neutral from 1st but from 2nd to neutral was way better. Dont forget to brake in new tires for first 120 miles even when its hot outside brand new tires are slippery!

saw it at amazon and came to ytube if someone bought the bike.. u r the first videos.. love the video, thankx forur time and commenting about the bike and showing to us..

I actually prefer a sensitive clutch. I hate when a bike won’t start to move until the clutch is almost fully released.

The 1st RU-vid unboxing and review vid!!! Dope. I was looking into this joint.

Thanks for the ride!

Just bought this model bike and cant wait for it to arrive!

Great video!

Fantastic bike for the low price! But absolutely a MUST to change out that Chinese factory oil for good oil! Glad to see you did that lol.

Cool look and features bro🎉 love the white and red

I bought the same bike just red on Amazon..!! I love it I did a few things to it and it is FAST for a 250cc it's a sweet lil bike for the price I got a cop buddy lol to hit it with his radar gun and to see if the spdeo was working ..!! Mine was spot on brother I love mine I also got the curser 250cc bike off Amazon and it's geared definitely and it's a lil bit faster than the sports bike either way I love both

15:18 you have to remember to reset the turn signal after your turn.

ok one thing you should always connect the positive first==because if wile connecting the positive your tool hits the frame of the bike or car or what ever or any other place on the bike there is no short or spark and if positive is connected first then when connecting the negative the only way you can create a short is by your tool hitting the positive terminal on the other side of the battery not the frame or other parts of the bike == but if you connect the negative first then when you are connecting the positive you can create a short with your wrench by your wrench touching any mettle part of the bike or car or thing the battery is in and the negative post on the battery ..in other words your odds are allot less that you will short something and burn things up :-) also synthetic oil is only needed if you run a extrema high temp situation like a turbo application so any name brand conventional 10w40 will give you just as good of protection for half the cost as any synthetic.

I have the class 200 efi loving it lot of fun

If anyone is wondering what this bike is a copy of. It is a direct outside copy of the Ninja 300. The inside is different but most of the parts for the outside of a Ninja 300 will fit on this bike. When I first saw it I can't believe how similar it is to a ninja 300. My first bike is a Ninja 300.

certainly needs a clutch adjustment. and put a tool on all fasteners.

I'll still get it for work. Looks amazing though

16:45 may not just be that you're doing something wrong, can't top these EFI china bikes off all the way, there's a vent that when blocked by fuel will kill the bike, super easy to do when topped off

Negative should always be first to disconnect, last to connect. The reason you don’t connect Negative first is because it will provide a path to ground through the frame and everything else while you are working on the Positive terminal. While working on the Positive terminal your tool could short on the frame or anything else, become red-hot, and literally weld itself to them. Not good!

I found this bike on sale at Best buy and I'm getting it this bike is verry cool

You also strip and tear up your bolts easier with power tools.

So I have the kpm 200 and yes it has a break in period. It's very easy for me to go from 1st to neutral but I learned on a bike that was harder so maybe I haven't noticed. Make sure to change the oil pretty much immediately. The air box also can be modified.

In Philippines we have same bike not actually same at all aspect but only the engine .it is called z250 gpr from a dealer called motorstar .though it is a 250 but runs like a 150cc not that fast since it is chineese bike but is enough to get to your destination.

Nice video

Cool

Registration? Plates? What's the process?

I just got my phatmoto 2022 bike in, currently working on it, so i have no experience with disk breaks, not sure if the breaks are supposed to be rubbing on the front wheel, got a video about putting it together? I loosened the break so there is absolutely no tension on the break pads but its still rubbing

Built mine with my gramps/grandpa, anyone have any advise about rear brake light staying on I checked the wires. It's diffently the rear break. seems like it's the foot brake.

Nice! You keep getting faster and bigger review items. Whats next, A CAR! lol Have fun.

So is it any good after a year?

You’re not supposed to start the bikes off on full synthetic, they only recommend switching after the break in period

Is that buzz/rattle around 4k rpm the thing you fixed with the rubber tape in the latest video?

The oil has to be (Wet clutch 4 cycle motorcycle oil).. I heard, I don't know if it would make shifting into neutral easier

Why only 1 video of the gtx 250 efi? That bike from the 1 vid I’ve seen is under rated and it’s 2022

Is this a 250cc single or twin cylinder engine? It resembles the Ninja 300 in some ways. Thanks for the assembly and review. Interesting bike. I spent years on my Ninja 250R, always thinking I'd trade it in sooner, but kept realizing it was fully capable for what I needed at that time and fun to ride. It could handle freeways without any issues, but wasn't able to accelerate up hills with any urgency as the main limit of that twin cylinder 250cc engine with about 31 hp and 18 ft lbs torque back then, top speed said 110 mph downhill. It was a lot of fun to ride, so I kept it and put on 35,000+ miles before trading it in. I used to get a range of 235 miles from a full tank till near empty. I see the Kawasaki Ninja 250R was replaced with the 300, then the 400, and now in 2024, the Ninja 450 (500) in the US. Currently have a Ninja 650, which is a fun bike too.

Jay, you might want to change the oil from the full synthetic to a non detergent oil certified for a motorcycle wet clutch Jaso Ma 1 or Ma 2 . The full synthetic oil could cause problems with your wet clutch and cause it to slip. Read in the manual for what they recommend you use for break in and wet clutch operation. Synthetic car oil has "friction modifiers", motorcycle synthetic for wet clutches is fine.

Looks just like the Kawasaky 400

hey i have that same model but wont start it has power but not start the engine any recommendation

Sweet bike dude do u need a license for that bike?

what's that rattling sound when u get up to 7,000 rpm's ? sounds like somethings very loose

got one a couple days ago, tried to take it for a ride but something is to tight in the steering, bike did not want to steer, about caused me to crash,wtf is going on here 😶

What about getting a tag and for inspection. does the bike come with proper titling so you can get a tag from DOT

It's the oil... That's y u can't find neutral... Give it time to break in

Sounds like you drop a wrench every time you shift a gear

I want one!

10w40 is to thick for that bike,the thick oil is whats causing the clunky shifting.nice bike.

Do u still have this bike and ? And do what bike is better this one or the imother vitacci bike u have ?

Sound like that 2nd key was vibrating on the triple

What is that clanging noise before you change the up gear 😢

I'm been looking into buy one. What's the fastest you got that bike up to?

This is a good video but it's insane to me that you use an impact for everything haha

Is this the same size as a regular motorcycle? Looks small.

Did u put the right mirror on backwards at first??

When changing the oil did it not have a filter or did you just skip that part?

10:38 sir I think I video froze🤣🤣

Sounds just like my 260cc Burgman clone. Heavy, slow, basic, rumbled itself apart after 4k miles.

Im very curious can you drive this bike on the interstate? Also would yall recommend this bike for someone starting out? Like any major downsides? Not sure if i should get it bc it only goes 85 if your 200lbs. I will get this for my first bike or i will get yamaha r3 bc i hear good things about that bike its just more expensive.

how many quarts you added? on the oil change

I have this bike but just in the blue. Last week it started just turning off when running. I can turn it right back on but it keeps shutting off. Have you had this problem or have any advice on what could be wrong with it?

And where do you get a part for it?

Hell yeah..... let's act like there's no such thing as a break in period, and rap that bike out. Not supposed to exceed 30 mph during break in man.

Is this a good first bike for a 16 year old told

Nice inndeed

What types of gasoline do you use?

Did you get the Organ of title

I really want one just to learn how to ride a motorcycle. I don't need a high bike to practice with. I heard if you come off the clutch wrong, etc, it will get away from you

How do you register this i image it comes with the title..so its as simple as any vehicle but just want to make sure

Is this good bike for rider over 6 foot

can anyone tell me at 11:56 what is that noise when he hits the switch? my bike sometimes dosent start up because it wont make that sound and also sometimes it revs up by itself im trying to figure out what it is

Did u have to charge the battery ?

mais pourquoi en France on a pas des motos pas cher comme ça

This is not a 250cc, it's a 230cc. There is a 250cc, 6 speed available from the same mfg (or at least the same name)

Lol… doesn’t sound good at all… thanks for the review, I was honestly thinking about ordering one, think I will save my money. Cheap isn’t always better

Can you upgrade this bike to go faster

How did you adjust the stalling on the bike ? FYI I just bought one and I have the Same issue

Can you put a fatter back tire

Hi, thanks for the video; I would like to buy one and replace the clutch with an adjustable one: any idea of which model could be compatible? Thanks!

when did you get the mso and was it hard to register?

Can you ride this on an interstate

I wish I had the money to get it

How’s the bike going now? Get a top speed yet?

How's it look at night?

How is the reliability?

Can u modify/replace the speedometer

Looks like this bike is no longer available. 😕

this guy said screw the break in period

For that price couldn’t people just get a ninja 400. Maybe used in good condition. The price would definitely be close imo. Seems like a waste of money if you’re looking for a reliable starter bike. But hey your money your choice.

Man gas is 5 bucks or more lol it was 4 a few months ago

just how fast does it gol

lol he’s on Florida

He said it’s reading the speed wrong… yeah because you put the same shit I put in my 2000 Honda Accord 3.0 VTEC when it’s winter Weather. You would’ve done better with the Chinese break in oil taking it for the first ride. That must’ve been what cars feel like when someone puts sugar and honey into their gas tank

The rattling of the plastics is so annoying. You can hear it clear as day right as he shifts gears.

Ok. So I'm wanting this bike, but I have a legitimate question for anyone that has experience with it. This bike in total from Amazon as of now, is $3527.82, which includes tax and shipping and handling. The question I have is, does the shipping and handling get paid up front, or is it included with monthly payments through Amazon prime? Never dealt with something like this and only had prime and card for a whopping 4 months

Tha look like west palm

No break in

Top speed ?

How’s the bike ?

That bike is selling for 1200 on Amazon now