FYI whether or not you’re mechanically inclined…you MUST check all critical fasteners for tightness. I assemble these Chinese scooters and bikes and have seen brake calipers, rotors and axle nuts loose. Even seen brake pads end up on one side of the rotor.
Read this again...I did check most of what I consider critical for safety, but didn't check the shift linkage...72 miles from home and no shifting...it ain't fun getting started from stops in 6th gear...
Make more content on this bike just got one in green I have about four hundred miles on it over the weekend seems to be breaking in great keep up the videos 👍
If it had 22+ hp it would be a good buy.. but 16hp seams a little.low for a 250.. it will most likely struggle going over 65. It seems like they are almost there with these chinese bikes. It is like just a few more hp and they will have something great..I am sure it is great riding around town or in a city..
@@MJTechChannel Just for comparison I have a New 2022 MT-03 and I 6ft 255ibs and a powerlifter. I can easily drive over 80 MPH in 5th gear at about 7000RPMS I had a lot left in the throttle and I think I can hit 100+ without much struggle. The mt-03 has a 321cc with 41HP and I do not think I need anymore HP for a bike honestly it is faster than my 2017 mustang 0-60 time and it pulls way harder too! I think if the Chinese bikes could change compression or something and squeeze out 5 more HP they would become the best beginner bikes that can handle the highway without any struggles. I would have got one because they are Cheap and for a first bike it would have been just perfect I just could not get over the low HP and highway speed. I drive to work and i take the highway and go 80+ at times. Anyways have a good day.
@@MJTechChannel Full throttle for a few miles and the highest speed I saw on the GPS was 68.8mph. I do think I have an issue with the fuel injection...the bike just doesn't sound right. (I'm light at about 140.) Do you know how to access the air filter? Pulled off the right side panel, but can't seem to figure out how to get into the air box. Back in the day, I had a Ninja 250 and it would do 100+... This bike is more comfortable than that bike was.
You bought my bike. Cool thanks for the assembly video. They say on their website they offer pro assembly for $249.00 i wonder if they build it at your home or ship it fully assembled.
never connect the negative first. positive first when installing and remove negative first when disconnecting. you always want the negative disconnected when you are connecting or disconnecting the positive terminal.
@@joshwilliams2437 change your factory oil as soon as you get your bike.... Then check all bolts Allen bolts Phillips and make sure they're all tight but not too tight.... If you plan on doing modifications please use loctite.... Give it a spin around the block ... See if you like it
In Asia for the same price you can get an entry level Yamaha, Suzuki or Honda sports bike. But most people in the US want at least a 600 so those probably wouldn't sell well in the US.
what is the bike a clone of this way if I wanted to do upgrades and what oil filter did you recommend your information excited me to give this bike a look should be arriving Tuesday
When will you review the Vitacchi 250 Ranger Touring Scooter ? I can't figure out if it's Air or Water cooled. The idiots who write the spec sheets on the txpowersports & 360powersports website say "Air Cooled" but I can't find any evidence of such. All the 250/260cc engines I find in parts listings or in say, Yamaha Majesty 250, Linhai Aeolus 260, VOG 260, Roketa 250 all appear to be a GY6 based 249cc water-cooled 170mm engine, a very good Chinesium copy of late 90s Yamaha YP250 engine.. Can you or anyone reading this "confirm or deny" which is which ? Much appreciated - David !
I’m new to the whole motorcycle world and hopefully sometime soon be looking into getting one. Does a bit wider rear tire on this type of bike might have a different effect on handling? Better or worse?
A wider rear tire provides a greater contact patch for improved grip. But, it does cause it to require more effort to lean for turning. Not a lot of extra effort but just a noticable amount. But that extra effort mainly comes from super wide tires. Tire's that are beyond 200mm wide. This one's still easily in the comfort zone.
SO EXCITED FOR INFO ON THIS!!! I'd like it to bomb around town as a re entry bike. Please note I am NOT mechanically inclined and I'm looking to know what it is like stock. Share as much as possible!
Any recommendations for low gear stalling issues, I’ve had the bike for 2 weeks now, did the recommended mods but I have trouble keeping it running during idles or low gears like red likes or yielding on 2nd gear boom it just stalls out of nowhere no shop will check it out in my area because of its origin please help!!
Sounds like either clutch adjustment or idle mixture. since it is EFI, you would need a computer to adjust the idle mixture. Find a decent motorcycle mechanic and ask them to adjust the clutch. Any decent mechanic should be able to do it. Take it to someone that specializes in the Japanese bikes that these things are clones of.
I have this same motorcycle. Any idea where the fuel pump fuse is on this bike? Mine blew over in the wind the other day and laid on its side probably for a few hours and now it won’t start. No fuel pump noise when the ignition switch is turned on…any advice?
You won’t believe if I tell you that I love this bike. It shifts smoothly, rides much better now with the new tires. The only thing I miss a little is the power from a bigger engine. But hey, after all my speed limit locally is from 45 to 65MPH. This bike does 75-80 MPH without killing it.
One thing ive been curious about for awhile now is what is the main differences between a Vitacci Titan 250, Vitacci GT0 and the Vitacci GTX 250? I am thinking about buying one as my first major bike but I dont understand the real differences here.
I’m curious I’m thinking of getting a motorcycle never ever own one I don’t have a license for one!! 😂 but I’m thinking to experience it sometime in the future my friend tells me it’s to late for me cause I’m 66 !!! 😂but , I feel for one. I’m gonna dare to ask you do you give private lessons by any chance? And if you do how much ? Oh I don’t have a bike yet 😂 I live in north Miami so… just get back to me on this thanks
Nice video and nice bike, thank for the explanation, but know I have another doubt, may I buy a Yamaha mt 03 or this bike instead? ( it’s my first bike)
A 250 is going to feel a little under powered for you. It will be great to learn on but you will want more power soon. When I started riding, on a 250 Rebel, I was somewhere between 250 and 300 and It got me around but struggled to maintain 55 on hills.
@@richardpiotrowski1043 Where did you order yours? And how much in total? I cancelled mine because they wanted to charge me a huge amount for shipping.
Seems it's stalling the same as the xpro x24...i changed the t map sensor on mine and it still stalls...notice quite a few of these Chinese bikes with the same issue
It did stall on the first start. I replaced the tmap anyways with the one that has the orange label as shown on the link that I provided. So far running great.
@@MJTechChannel Mine dies at stops unless I go really high on the revs as I stop. (Not every time, but probably about 1 out of 3 stops.) Thanks, I'll have a look under the seat...
@MJTech I'm planning to purchase one in a month can I get you to come up to Port St Lucie and help with the assembly? I'd be glad to pay you for your time, plus I would like to pick your brain on the bike as well.
Thanks. Mine showed up this morning (went with blue)...was hoping to find an unboxing/setup video...and you did it. (Much rather sit inside with the AC, watching a video, than outside in the heat trying to figure it all out.) Is the oil capacity requirement (not in manual) on the engine? If not, how much oil? (Agree with the instant oil change...do it on all of my China Bikes.) Looking forward to more videos on this bike.
Hi. I bought a Titan 250cc. The problem I am having is that it stalls for no reason when start accelerating and when it down rotation with clutch fully pressed. I returned to the store and the thing happened with 2 GTX, witch are basically the same. Did it happen with you? If yes, how did you fix it? Thanks.
I actually learned something about ads. If there’s two and you don’t wanna watch the second one cause the first was unskipable, just close the video after the first ad plays and you should be able to watch the video without having the beginning ads. ❤
![Vitacci Titan 250 - [2022] - Cheap Chinese Motorcycle - Highway Capable!](/img/logo.svg){kind=logo}
