Xbox One X and PlayStation 4 No Signal Repair

Подписаться 424 тыс.

Просмотров 34 тыс.

50% 1

⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

Наука

Опубликовано:

31 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@oneandonlytyler1 3 года назад

im no pro but in the case that the flux got on the chip and you cant tell where the dot is to tell you pin 1,if you look at the back,the earth square on the bottom of the chip has a rounded corner on one edge where pin 1 is as pictured at 10.53.if you look the square is missing the corner,great work @northridgefix

@lexander9686 3 года назад

Thank you, Noted👍

@ps5gamepl4ys 2 года назад

Nice,

@jasondoesthings919 3 года назад

I can’t imagine getting as much done in a day as you do, keep up the great work.

@MohammedHussain-wu8gc 3 года назад

i love how you always add those subtle conversations from different customers. it really gives a good understanding to the watcher on what kind of questions you get everyday as a repair shop. Greetings from chicago!

@martingregson7136 3 года назад

It's so refreshing to see your reaction when you fix something and its successful. I still get the same kick out of making a successful repair ... keep it buddy

@tnfloose9023 2 года назад

I got the Ksger soldering and hot air station. For both separately will run you about $150. Or they make a combined unit for $200. Great budget unit for the hobbyist/Beginner. I found them cheapest on Bangood. Then I got my flux, low melt solder, copper braid and multimeter from this man right here!

@imnotdon3765 3 года назад

Good advice on the solder station. I'm 50 yrs old and started learning repair about 2 years ago and think the same way. My inexpensive China machine is doing a fine job for what I need.

@StezStixFix 3 года назад

Excellent job, as always!

@Watch__This_ 3 года назад

Thanks for all the videos, I am learning a lot from you, one of the best youtube how to... thanks, and go on with the good work, and i have to say this: the satisfection when the job is done is our fuel for all next repairs...

@TheCod3r 3 года назад

Another great video, I was saying on stream a couple of days ago how good you are, keep doing greatness 😃

@jasondoesthings919 3 года назад

TheCod3r he is great, but you give him a run for his money. 😁

@Finditfixitphilipit 3 года назад

See Phil with the low melt this is exactly what I'm talking about and like him I swear by it. Yes it costs some extra money but it's well worth it

@TheCod3r 3 года назад

@@Finditfixitphilipit yeah I know mate I just don't personally use it because I can achieve the same result using my tools and leaded solder, just takes patience and practice :)

@TheCod3r 3 года назад

@@jasondoesthings919 i don't know so much, i focus on only consoles not general electronics

@Finditfixitphilipit 3 года назад

@Digital Resurrection I don't like using solder paste. I tried this before and does not have the same desired effect

@rasheed3039 3 года назад

Years of experience in short videos that's amazing 👍

@Modyfikator 3 года назад

Nice job :) Great tut for beginner.

@Viggen66 3 года назад

So fast repair owing to your experience, great work here

@dankozlatkovic1993 3 года назад

Pedatno i profesionalno, svaka čast i želim Vam dalji uspeh u poslu i još puno videa. Pozdrav! Pedagogically and professionally, every part and I wish you further success in business and many more videos. Greeting!

@stefanlechner 3 года назад

Nice work on those two consoles. I love it. Perfect job.👌👍

@alinxn 3 года назад

Good job!!! When i playing your videos I’m relaxing ^_^ !!

@opelman5173 3 года назад

Awesome and clean job. I going to practice to reach this level of perfection!

@rigojaimes2151 3 года назад

Amazing job Alex , where could I get that soldering tip and at what temperature do you typically keep it at?

@onuroskay8613 3 года назад

Thanks for another great video. Greetings from Turkiye

@dalibensouilah950 3 года назад

Seeing that new hdmi in place, nice and clean..is just magical

@donnierobertson3088 3 года назад

Great job and video like always

@dougtaylor7724 3 года назад

One of the few places on earth I can watch something without politics. Thank you!

@bubblegum1792 3 года назад

Excellent as always

@iadikeshri.555 3 года назад

Lovely 🏵️ Great job sir 👍☺️

@MalcomJPrince 3 года назад

First like and then watch. Greetings from Germany ✌️

@oliverb.5041 3 года назад

Hi, wich microscope is used for the video, where can i buy one? Excellent videos 👍 you're awesome Sir!

@electrolk3811 3 года назад

Vara level..👌

@mohammadomar8299 3 года назад

excellent job brother hussain

@jeanpuetz4890 3 года назад

What' your microscope and lens you use? Great videos!

@jamesbruno5896 3 года назад

Amazing skills!

@clevinvarghese8504 3 года назад

Nice work 👍👍

@bubblegum1792 3 года назад

I have to say again awesome like always We can call you a real pro

@rifatahmed4659 3 года назад

Love you brother

@djminddrum 3 года назад

awesome man!

@mohamadmrkn3264 3 года назад

I like you man you are funny and you do a great job thank you for the nice videos

@rizwanfarooqui5518 3 года назад

Today we missed your smile of satisfaction after fixing a device😀

@MOHAMED-qh3px 3 года назад

GREAT JOOOOOOOOB SIR

@SupremeRepairs 3 года назад

ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ವಿಡಿಯೋ ❤️😍 amazing and beautiful video ❤️😍

@lexander9686 3 года назад

Weird profile picture

@dalibensouilah950 3 года назад

I was happy to see the ic ship falling that way coz i always wondered how it looks from the bottom hahaha now i get it!

@aotox5173 3 года назад

Man i dont know why but u remind me of adam sadler xD keep up the good work

@kintag4459 3 года назад

great job keep it up

@John-oo9xu 3 года назад

Its better to solder the legs of the hdmi port on both sides of the board. It gets loose in time with only the back soldered. And also when used lead free solder there is less force needed to brake out the port than with leaded solder

@somethingaboutachainsawgam8137 2 года назад

What brand and model multimeter do you use? I haven't notice you mention it yet.

@Jason-zh7wo 3 года назад

Awesome 👍

@cacrybarber 3 года назад

Surgeon skills 😎

@renzfixit9649 3 года назад

Goodjob boss im filipino tech im always watching ur video i want same to you multi task repair😊😊😊

@rheography 3 года назад

Hi Alex, im sure you've answered this question before and I apologize for asking again. can you tell me what hot air station you're using and also where can i get that hot air stand holder that you use.

@mazi16v 3 года назад

Incredible duo :) - which flux do you use?

@bilalamin7580 3 года назад

Am tech 559 flux. this guy always tell us .

@marcianzero_yt 3 года назад

It’s also in the video description. Why read given info, when you can request for a personal response.

@Finditfixitphilipit 3 года назад

I used cheap to begin with. Maybe £100 was spent on cheap soldering iron and hot air gun with a few accessories. Earned that back in the first day and now I own £4000 worth of equipment. So as you say can be done with a cheap station just takes a little longer than you do it. I swear by low melt also but not many people I know who work on boards use it.

@outfield1988 Год назад

Beautiful

@habzmiah 3 года назад

Fun to watch

@rodeljavier9179 3 года назад

good job sir..

@alessandrozax 3 года назад

Hi, just few information for all the novels..how you know that the problem for "no signal" was only that chip ? it should be interesting investigate why that chip is dead.. Great Work anyway , happy new year at all from Italy.

@stevencharette7918 2 года назад

sorry forgot to mention i will be picking up that weller wx2 in feb. its 1g but worth it.

@RaheebCar 3 года назад

I like these words super solid better than factory.

@dylannicolodi4673 2 года назад

Do you do mail in repairs? Never had any issues with my Xbox or hdmi port. I fell asleep last night with the Xbox playing a movie, woke up the Xbox power on and the tv powered on from the Xbox controller, but no video.

@RafalScrapper 3 года назад

well done

@suryavanshib 3 года назад

awesome ✌️✌️✌️

@ahmadwalidalkhatib316 3 года назад

hi i have one question . what kind of hot air machine you use ? i'm watching you from palestine

@dafalzonAUS 3 года назад

When can I get, my northridgefix, better than factory t-shirt?

@jasontrewin123 3 года назад

I wonder how those pins get pushed that way? Minus the obviously someone apply too much pressure on the cable.

@007Broadcaster 3 года назад

Why do you sometimes clean the solder with the wick and sometimes you don't, how do we know when the solder needs cleaning?

@instantgg5752 3 года назад

Do you use anti static on you body ?

@aknulakc1313 3 года назад

How do you get HDMI legs out ? I dont get it. There were a lot of solder but suddenly not

@missnakitalola7357 3 года назад

good day sir i have a question about diode and resistor and mostpet like i IC ..where did you buy all parts like you replacement tool pasts .....i hope you to answer my question i'm find and searhing like you complete box parts ......thank you sir i'm you're follower from phillipines sir ....

@abdulmuqadimkhan8582 3 года назад

Present 🤚

@neosrt10 3 года назад

So you didnt remove the solder from the top side pins you just spread it left to right ? 2. Whats that Xbox One X chip called ..retimer chip?

@joshuaa1921 3 года назад

Yes retimer chip he sells them on his website in the description

@johncramer99 3 года назад

At what temp do you use the soldering iron at?

@lexander9686 3 года назад

370°c, most of the time for me

@stefcampagna2321 3 года назад

thks to big boss too :-)

@TheKiLLHertZ 3 года назад

People have such clumsy and heavy hands now days, always breaking their consoles especially hdmi ports. LIKE HOWWW LOL. But good video though always love your work!

@sauravroy4411 3 года назад

Tony stark of northridge......

@macbp8455 3 года назад

ما شاء الله زاد عدد المشتركين كان 66 عقبال 100 الف

@stevencharette7918 2 года назад

ive got to get me some of that magic flux and wick lol

@calvinmientke3539 3 года назад

does anyone else try to move the picture with their cursor? I love a freshly wicked circuit board. Looks like victory!

@Amir_342 3 года назад

why does a ups cuts power off while there's electricity, and not using it's battery, any tips on where's the problem? It's a PowerMax brand 1200va m, i use it for my ps4 and it reset on yello light while there's electricity.

@RespawnRestricted 3 года назад

What does a repair like that cost cuz I know a ps4 is cheep

@ReballingBGA 3 года назад

👍

@KNFIX-CUCHI 3 года назад

👍👍👍👍👍👍

@kiramatzu 3 года назад

and where is a good place to buy stations

@johannbiker8803 3 года назад

👍👍👍

@BenhatesPOOP 3 года назад

I have an original ps4 retimer chip to replace and should I just use my hot air station to remove it or should I first add low melt solder before using hot air. Please help sir

@marcianzero_yt 3 года назад

If you got no experience, take the more easy route. Use low melt to reduce the amount of heat required on the hot air station. More heat is more risk.

@BenhatesPOOP 3 года назад

@@marcianzero_yt okay! I've practised on some boards and its quite hard for me as much heat is need on broken motherboards that I have practised on. Thanks for the suggestion.

@allantateossian967 2 года назад

send it to Alex!

@JamieRobert_ 2 года назад

Why does the retimer chip always fail on the Xbox one x

@Infiniti25 3 года назад

PS4 fat HDMI port can be removed by adding lead solder to the pins and the legs, then placing the board on your bench so the HDMI port is facing the floor. You apply hot air from the back and you circle around. You can also use your soldering iron on the legs in rotation to apply addition heat to the port and board in that area. It should drop to the floor when enough heat is present

@naseerbk 3 года назад

This repair thing is just awesome if its done brilliantly

@danielfortune6895 3 года назад

Do you do online training.

@NorthridgeFix 3 года назад

Working on it. Classes will start in January.

@lexander9686 3 года назад

@@NorthridgeFix have they started yet

@AntisocialDipshits 3 года назад

Let's get more ps4 stuff in the video

@LCDLCD-cl2qp 3 года назад

4:11 How to empty the connector holes? When I try with the solder tress he don’t empty the hole .... very hard for Me to find the good solution

@Sadenki 3 года назад

replace your soldering iron !

@LCDLCD-cl2qp 3 года назад

@@Sadenki it’s new ....

@Sadenki 3 года назад

@@LCDLCD-cl2qp You need a good one, Like Hakko FM-203 or JBC CD-2BQE

@poslane99 3 года назад

At 3:07 he shows you use soldering wick and soldering iron

@LCDLCD-cl2qp 3 года назад

@@poslane99 yes I try this , but the hole are not empty

@user-mb7ex4lq1y 3 года назад

خامس تعليق 😍👍👍👍👍

@aqib2000 3 года назад

FYI, If you look at the thermal under the chip, it has a corner which points at the direction of pin number 1. You don’t have to clean the top of the chip to find the dot.

@aramxaylani 3 года назад

Wow no comment

@jobsusi3268 3 года назад

Present

@ciganyhipervandor132 3 года назад

...and if you can work with a cheap, crappy soldering station, you will be able to work with any better one...

@farzana1236 3 года назад

Today my Bad day I am coming in workshop and any one hit my Bike and ask to me that was my fall i am now sad 😔

@Mobilerepairingchannel 3 года назад

Do you believe in God?

@ashrafbashreef3523 2 года назад

well done

@mattdunlop6056 3 года назад

When you solder the legs of a port, is it better to bridge the legs if possible to make a more solid stable port or is it best just too put it back to factory?

@Infiniti25 3 года назад

I’ve seen both done. I think those holes carry enough solder for the port to be stable, but bridging the legs (not the pins for anyone else reading) is just as good. It sometimes happens that way anyway if you haven’t used low melt solder when wicking those holes due to the extra heat needed because the ground plane is so huge there, you sometimes melt the green solder mask off which was happening in this video.

@mattdunlop6056 3 года назад

@@Infiniti25 yeah it does seem reasonable on a HDMI port that the 4 legs and large holes allow for enough solder to hold it. I have just seen too many ripped and mangled USB ports/pads that SEEM like they would benefit from a little leg bridging. I have never done that.....but am interested in if it would actually add any strength. Specifically to ports that are.....sketchy to begin with. See that A LOT on camera ports....the factory seems to use the bare minimum just to hold the port in, even though its heavy use like a charging/data port.

@Infiniti25 3 года назад

@@mattdunlop6056 as long as you verify that all what you intend to solder together are the port legs with a multimeter, adding bridges will add strength so it can’t be pulled out, it will just pass the point of failure on to maybe the plastic tab holding the pins in the user accessible side of the port. If it is a proprietary hard or impossible to find port I wouldn’t do it, I’d rather be able to reuse the existing port (if at all) than risk no chance of reuse. If it’s a micro USB port you can do it. I think I’d rather add some hot glue to the back side of the port for strength and allow the possibility of reuse on some ports 👍