Xbox SCUF Instinct Hall Effect Stick Upgrade | Best Solution Out There 

Jun Zeng's hall effect correction boards are such a godsend!

Been thinking about installing these in a few of our broken controllers. Just been waiting on others to pull the plug first and find all the bad bits out with them. Looks a tad more fiddly than i would like but perfectly doable.

Lightning Force 4 "METAL SQUAD" as the OST for this video. Nice.

Would love to see you do this on the envision to see if they would work or need a calibration board

you're a legend 👍

You should done the rotation calibration with them boards...

Circularity is important since the diagonal inputs will register 100% before reaching the outer rim. So this essentially will throw you off if you are trying to make small adjustments when moving or aiming. For example if you are aiming up it will move slowly, let's say it register 20% input, as expected and then if you try to aim slightly to the left or right you essentially will have a much faster movement then what you were expecting, let's just say for arguments sake it's reads as 35-45% input.

Where did you get those pcb for calibration? do you have a link?

why didnt you solder the wire to the middle pin and then insulate before mounting? would there be a problem with that?

I purchased Hall effect stud for my Scuf instinct I hope my tech does it right

If you sold brand new Scuf controllers modded with hall effects sticks I would buy one.

I do think these are a solid replacement, I've done 2 of my own controllers & and elite series 2 and the hall effects with the pcbs is a next level of smoothness

Did I need to buy like a micro chip board also to install hall sticks? Or just purchasing the module is all I need?

Have you had any scuf envisons in yet?

Hey could you please Show which one these are? You unfortunelly don’t take a Order from my Country 😬 thank you very much (:

If you put these in with no calibration board but you calibrate it with the holes,How does it play in games ? Does the jitter affect shooters? Call of duty? Thanks

Hey When will it be possible to install hall effect sticks on dualsense?

Pot secret sauce 🤤? Anything i might have mentioned 😉 🪛 or just a minimal switch 🪄✨ about, pull the rabbit 🐰 out of the hat 🎩 already 🐇 lol. Ill say no more 🤫. So the middle isolation tube is a pass through redirection circuit ⚡ of sorts 🤷🏼‍♂️🤯😵‍💫. For range calibration? Not for Elite Series 2 controllers yet or the pot screw 🔩 centre core is incompatible to Frankenstein into a tighter tolerance pot mechanism like a crazy person 🥴. I salute 🫡 your workmanship do you take apprentices, need a tea ☕ boy lol.

Have you thought about selling repair kits with instructions? Being from the States, I can't send my controller to you, but I'd purchase a 'do it yourself' kit from your company in a heartbeat.

The obligation to have these 2 PCBs soldered so as not to have interference with the triggers is a real thorn in my ass. I want to change my XboX Series sticks myself and there are new potential risks of screwing up that present themselves to me with all this soldering because of this damn interference. Isn't there a simpler solution to isolate the Hall Effect from this small magnetic source? Like a small iron plate that would be placed against the potentiometer? Anyway, thank you for this video. It shows exactly what to solder where and how if I really have to deal with this stain on my controller. This will require me to invest a minimum in a vice system (my little pliers are too weak for such a meticulous task) and a magnifying glass, not to mention the exercises that I will have to do to train myself to squeeze my buttocks properly. The work doesn't seem too difficult, but the extra wires and diodes are what scares me. I would test with metallic self-adhesive tape on the most exposed side of the potentiometer to see if it can avoid all this work. A surface sufficiently sensitive to magnetism can paradoxically act as an insulator. It shouldn't rub the thumbstick and the trigger magnets are far enough away and small enough that it might work. A small elastic band should also be enough to hold it in place if old age and heat loosen the tape. It's not great to have a conductive object that moves freely on a PCB, LMNAO. If it ever works, I will report the result to you (when I take the next step in the still undetermined future ^^).

Where do you get your drift fix pcb’s from? The ones I order on Amazon cover the entire module and the wires for rumble motors

When will you start taking US orders? I want to give you my money.

Are hall effect stick modules possible on the Xbox elite 2 controller? Most sources say yes; however, they haven’t completed a unit yet. Would things like the stick tensioners or magnetic thumb caps interfere?

One question: I also installed Hall Sticks on a XBox controller and notived afterwards that the LT/RT Buttons also work with hall sensors. After testing it, I could see how the hall sensor in the sticks gets disturbed by the magnets on the trigger. For my normal Xbox controller I bought clicky buttons from extremerate and want to remove the magnet. You seem to only built in the hall sticks. How did you work around that problem? I guess the scuff you have there will work with the same hall technology for the LT/RT buttons. I do not see a proper solution there since installing the board and calibrating it with software means that it will be centered until I press the LT button (which has its hall sensor right under the sicks). That would cause the left stick to drift a little up or down. I would be very greatfull, if you could tell me a proper solution on that or at least how y9ou fought that problem. Thanks a lot and great video!

do you offer hall effect module for the dualsence edge? thank you

I'm confused why most of these jumpers aren't already traces on the board that is being added. I'll also second that I wish I knew where to get this mod done in the US :)

Does it work with the Hall Rocker Orange potentiometers? I only have the pcb boards.

sucks you dont take u.s. orders 😒