XFX Merc RX 6800 XT - Not Detected and No Fan Spinning - Fix

Подписаться 5 тыс.

Просмотров 2,3 тыс.

50% 1

Embark on a groundbreaking repair journey with our latest video on 'Graphics Card Repairs' featuring the XFX Merc RX 6800 XT. Tackling the common issue of 'not detected' and silent fans, we delve into the intricacies of repairing the RX 6800 XT version 1 from XFX.
Unveiling a known problem, we focus on a resistor linked to the SOC rail, prone to blowing up due to high current draw. Witness the step-by-step process as we locate the fault, skillfully replace the faulty resistor, and ensure the card's stability through rigorous stress testing.
This video marks a milestone as the first AMD GPU repair showcased on our channel. Subscribe, like, and share to stay abreast of cutting-edge graphics card repairs and witness the expertise behind every restoration.
Support me on Patreon: patreon.com/GraphicsCardRepairs
You Can Book Your Repair At : graphicscardrepairs.com/repai...
🔴 Don't miss our latest repair videos! Subscribe for more: / @graphicscardrepairs-t...
🔴 Support My Other Channel
/ @pixel_playground
👁️‍🗨️ Must-Watch Videos:
GPU Reballing: • Master The Art of GPU ...
Memory Chip Reballing: • Master The Art of Memo...
How to Repair Broken Memory Pads: • The Hidden Art of Grap...
🔧 Other Related Graphics Card Repair Videos:
RTX 4090 Repair (Error Code 43): • PNY XLR8 RTX 4090 Repa...
RTX 3070 Repair (No Display): • MSI Ventus RTX 3070 GP...
RTX 3070 Repair (Not Detected): • MSI Ventus RTX 3070 No...
RTX 3060 Ti Repair (Not Detected): • Gigabyte RTX 3060 Ti N...
🌐 Connect with Us:
Website: graphicscardrepairs.com
Email: support@graphicscardrepairs.com
Facebook: profile.php?...
Instagram: / graphicscardrepairs
🔥 Tags: #gpurepair #graphicscardrepair #XFXRX6800XT
Music:
Atmospheric Morning Corporate by LesFM | lesfm.net/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...

Хобби

Опубликовано:

20 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@Lazllb 3 месяца назад

I just wanted to say that thanks to you and this video I was able to fix my dead XFC MERC 6800XT with this exact same issue! My first ever experience soldering and repairing a board. Thank you!

@GraphicsCardRepairs-tk7ql 3 месяца назад

I'm glad my video could be of help to you. Thank you for subscribing to my channel. 😁

@rongray8934 5 месяцев назад

Great video. Thanks for sharing all your knowledge.

@GraphicsCardRepairs-tk7ql 5 месяцев назад

Thank you for watching 😁

@xbillygangx 6 месяцев назад

Keep up the the great work!

@GraphicsCardRepairs-tk7ql 6 месяцев назад

Thank you 😊

@tonict2302 3 дня назад

Awesome video

@GraphicsCardRepairs-tk7ql 3 дня назад

Thank you 😁

@Dandan-tg6tj 6 месяцев назад

The way you repair a graphics card seems to be very easy. I know it isn't actually easy but it certainly looks so.

@GraphicsCardRepairs-tk7ql 6 месяцев назад

Thank you😊

@jimmyramkey895 5 месяцев назад

For someone who might be attempting this fix as well, what was the new resistor you replaced the broken one with? Which size and rating of 0 OHM surface mount resistor?

@GraphicsCardRepairs-tk7ql 5 месяцев назад

The one I replaced is a 0 Ohm 1206 size resistor.

@NAZ2222222 5 месяцев назад

@@GraphicsCardRepairs-tk7ql Could you please indicate the exact model of 1206 you used(what mW)? I have this problem and want to fix it. Thank you in advance!

@GraphicsCardRepairs-tk7ql 5 месяцев назад

There is no watts rating. 0 ohm 1206 size. Best resistors are which have less than 5% variation.

@GraphicsCardRepairs-tk7ql 5 месяцев назад

a.aliexpress.com/_opxT67a

@GraphicsCardRepairs-tk7ql 5 месяцев назад

Use this link. This is the resistor I used in the video. It is 1% tolerance and 1/4w.

@TheSystemActive 28 дней назад

Hi, thanks for this video.I have a question if you don't mind me asking. I have this exact card and had an issue trying to take it apart to repaste and repad (really high hotspot temps). It seemed like there were additional screws holding it together no matter how hard I tugged to seperate the pcb and cooler. I took off 10 total on the backplate (4 for the cooler/die contact and the 6 surrounding for the cooler, see 0:16 frame). Are there any additional fasterners or was I simply not tugging at it enough? I've repasted and repadded many gpu's at this point in time and haven't encountered anything like this. Thank you in advance

@GraphicsCardRepairs-tk7ql 28 дней назад

For the front cooler to come off it's only the screws on the back of the GPU. To remove the black frame inside there are many screws including 3 on the IO plate. to remove the back plate there are 2 screws on the PCB as well, on either side of the GPU core.

@TheSystemActive 28 дней назад

@@GraphicsCardRepairs-tk7ql thank you so much for the reply. So it sounds like just the back plate screws will be enough and I did undo everything I just needed try harder. Wish me luck, it was really stuck on

@GraphicsCardRepairs-tk7ql 28 дней назад

Make sure you are holding only the cooler and not the black frame. The black frame is attached to the PCB from inside. The cooler needs to be removed first. Then the black frame.

@TheSystemActive 28 дней назад

@@GraphicsCardRepairs-tk7ql Will do. I'll give it a try again tomorrow or the day after and will report back with how it goes. I'm going to run furmark for 10 minutes or so prior to the attempt to hopefully loosen any adhesion from the thermal pads as well.

@thibaultdeurveilher3122 2 месяца назад

Congrats! Thx for sharing. I ha ve a xfx 6800 xt, today my pc won't boot and my motherboard diag led say 'vga'... Leds on graphic card turn on and fan spinning but no signal on screen😮 Any idea?

@GraphicsCardRepairs-tk7ql 2 месяца назад

At this point it is difficult to say. If you use a CPU with graphics can you boot through the internal graphics and check if the GPU is detected? The first step is to check if the card is detected or not detected everything else will follow after that.

@autotropicplaybench1819 Месяц назад

Have you resolved this? If not let us know what else you have tried. One tip I can suggest is confirm if you use DisplayPort on the monitor, and try to connect to HDMI instead and restart the PC, if it then boots properly. If it doesn't then definitely check other steps but if somehow you notice it does, then try if connecting via DisplayPort again works. If this is the case, you may need to seek how to tape one specific DisplayPort pin to prevent power issues causing the temporary boot issue.

@mcblocked2 5 месяцев назад

Maan that is nice!!! I didnt know there was common faults within this card. I have this exact model and has a no detect problem as well and has all the voltages present but all the waveforms in the oscilloscope looks distorted. where do i check further to find the root cause of this fault?

@GraphicsCardRepairs-tk7ql 5 месяцев назад

Did you check the SOC rail? This is the only DRMOS with SIC DRMOS and all others are IOR. Check if this chip is outputting and voltage. Even if all other chips have voltage this chip might be missing voltage. Check if it's missing. If it's missing check this resistor at the back. This zero ohm resistor is know to burn out. Causing the SOC rail to go missing even though all other voltages are present even the core will be present.

@mcblocked2 5 месяцев назад

it is present 0.975v , and all the other voltages present.@@GraphicsCardRepairs-tk7ql

@GraphicsCardRepairs-tk7ql 5 месяцев назад

Have you checked pex reset? And also if BIOS is getting read?

@personalcomputerbuilds 3 месяца назад

xfx 5700xt 6pin are has a red indicator. sometimes boot sometime no display

@GraphicsCardRepairs-tk7ql 3 месяца назад

If your card sometimes boots and otherwise does not, i assume it's a loose connection on the 6 pin. Red light at the back of the card near the 6 pin or 8 pin means break in connectivity between the circuit and the connector. This light also turns on when the fuse blows but if it's intermittent then it's good. Check for loose connection.

@realward3784 4 месяца назад

I have same gpu have no power also would you assist me in the fix ?

@GraphicsCardRepairs-tk7ql 4 месяца назад

This video describes the problem and I show how to fix the problem. If you are asking me to fix it, you can send your card for repairs to me. Fill in the repair request form on my website graphicscardrepairs.com/repair-request/

@bravocortez4087 6 месяцев назад

Can you mentor me so I can repair these in the states?

@GraphicsCardRepairs-tk7ql 6 месяцев назад

Thank you so much for reaching out and expressing interest in learning from me. I truly appreciate your enthusiasm for graphics card repair. However, due to the significant time difference between the UAE and the United States, coupled with my demanding schedule, it would be challenging for me to provide the level of mentoring and support you deserve. My current commitments during the day and evening make it difficult to allocate the time needed for effective mentoring. However, I recommend reaching out to local resources in the United States, such as individuals like Tony from NorthwestRepair. He has a great reputation, and I believe he could offer valuable guidance and support in your pursuit of graphics card repair skills. Additionally, if you ever find yourself stuck with any card or have specific questions, feel free to leave a comment on my RU-vid videos. I'll do my best to respond and assist you. It might not be as immediate as having a mentor, but I'm here to offer support whenever possible.

@rongray8934 5 месяцев назад

He is mentoring us all. Keep watching, buy a few things and practice on older items first. Good luck to you.

@bravocortez4087 6 месяцев назад

Was that a yes? Do you have a discord to connect?

@GraphicsCardRepairs-tk7ql 6 месяцев назад

I am so sorry. My schedule is too tight as I also do a Day job and just have 3 hours for GPU repairs. Unfortunately, i will not be able to mentor however if for any reason you are stuck you can leave a comment and I will reply with a solution or suggestion.