Xiaomi m365 first look at the 500W motor (Monorim ?) 

I have Xiaomi Pro 1st gen with 13s battery and I have these weird noises at about 34-36 kmh, if I exceed it, the weird noise will disappear. Also is good to have engine braking at minimum current (I have 8A at max).I replaced the mosfets for maybe 10 times just because of strong braking or braking with full battery. Also is good to have another fuse (for example I use car fuses), so if you burn two mosfets, it will go to short circuit and trust me - you really dont want to replace fuse in original battery. About real currents (measured right from battery): 27A at max - mosfets burned after 80 km and 350W Pro engine gets really hot after 3 km ride. 22A - my current sport mode (13S 54V full charge), did not burn mosfets yet, really powerfull, 42kmh and engine gets hot after about 10km, so it is usable 18A - my current D mode, 37kmh, engine never got really hot Maybe it will help someone

Finally!! A real scooter mod channel that doesn't try to discourage you from upgrading your scooter.

Fantastic video! Well done. Not going to lie that speed was fast

Definetly enjoyed the content! I am looking to have 2WD on my XIAOMI M365!

Ive got my monorim motor it rides a bit swoother i dont think you need the pro dash i done it with hack its going about 31km now but the wheel hits back of mud guard.its ok when i pull it up a bit.ive ordered a 48v batery 100ah will that work on stock controler.???

500W and 12 battery combination looks really a huge boost. I wonder is it legal this kind of modification and what would be life span of xiomi itself. Anyways don't teach the younger ones and great content as always! Cheers! :)

Great video. Again. Keep it up 👍🏽

The hole scooter is sounding noise?

Loving what u do

I have m365 with 2nd gen 500w pro motor from aliexpress. With just the stock 10s battery it reaches 40kmh on a full charge. 35kmh is possible down to 30% battery charge

Hello Mate, great video as always, sorry to hear about your controller, if your able to get hold of the V3 stock controller that will do you just good, no need to change mosfets on that,since I last commented on your previous video clip on your Dual motor video clip, I have now gone 13s3p 14.4ah internal alongside my 13s4p 20ah external battery ,Rita adapter for BMS emulation great with the 500w monorim motor, I have no issues and have pushed some good speeds so far and have done alot miles on the same controller, 900+ miles so far, I havent changed my firmware for along while as i'm currently comfortable with the firmware I created

I’m looking to add two 36v 500w motors to my hover-1 alpha that I’m customizing. It’s my first build and I’m a bit nervous. Can I run two motors at 36v on the stock battery and just upgrade it with a pack? Or should I upgrade everything and get 48-60v and run dual 48v-60v 500-1000w ? So many choices. Obviously I’ll have to upgrade the controllers and modify a bit but it’s mostly bolt on and go. Any thoughts?

Did you run the battery pack in parrell so keeping the 36v or did you seties doubling the voltage I also got a replacement controller and the speedo was waaaayyyy out. Reinforce the shunts and replace the large capacitor

also where can i buy an 12s or 14s battery?

Hello, I was wondering if I buy the Rita adapter from Denis yurev and I add a 12s 44,4v and the stock battery. Is there any issue with adding a 350w or 500w to it ? Do I have to do something specific to the software

Been there got a stack of burnt out controllers. Frustrating and fun at the same time. 👍

Hi I have 48 v battery from my bike and I trying to add it in my scooter m365 I add only 48 volt battery and when I turn on scooter beeping I change the firmware to 48 v remove charging mode and keep beeping stock controller can’t work with other battery -bms? Thanks mate I wait your answer

what does the extra battery do does it make the voltage higher or does it increase the capacity

Hey thanks for this review!! I just ordered the monorim 500w motor. I was wondering where i can buy the extra battery pack that you have ? Cheers !

Probably you overload the controller by hitting the break lever and eventually if you do that kers will kick in.

This modified it’ s possibile for Ducati Pro 1 Evo ??

I have this motor coming on delivery. It's a 10x125inch wheel. Is this adequate for the m365 as I only realised the size afterwards? I dobt suppose anyone would know?

Hey mate.. great and very helpful comparison. I have new 365PRO and my battery overheats while I m driving back to home from work. I drive almost 10km uphill. It s small but constatnt incline and I have 100kg :) . Battery temp reach 53,54 degrees and Scooter turns off. Do u think that I will resolve this problem if I add larger battery something like Monorim B2 battery 48v 14.4ah? What do you think?

i got my xiaomi pro 2 custom with a 52v 25amps controller and an 52v battery with a stock 36v 300w motor and top speed of 45kmh.but my motor takes up to heat fast and it burns out..Will a monorim 500w motor will better for me or it will heat even worst than the stock one?

Nice Videos! Where do you get your batteries from? :)

Hi, Can I use the Monorim 500w motor with the original 36v battery? Will it increase speed?

Hi bro what is the phone holder thing called. Can you send me link please

So how about now with field weakening?

hi mate good job. if you could answer my questions i would be so happy. - i bought that engine but i am not seeking for speed. I am about more torque. I have to climb high hill during my journey to my home everday. 350w engine is not enough for that. * if use it with stock battery (i have xiaomi pro 2 scooter), will it be safe for my controller? I guess stock battery has 40v but engine has 48v? * ı am not gonna change the firmware, so it can't go faster than 25 kmh? * Stock battery has 12400 mah, if put 40000 mah instead of stock battery and 40v, can i get more range? * if i put 48v battery, it will go faster than 25 kmh even if i dont change the firmware? Thanks mate.

I am replacing my 250W with a 350W motor Do I need to do any firmware or software updates? Thanks for the video!

That motor sound 😄 like a jet engine 😄

El motor 500w monorim cuantos kg pesa? Y el motor de serie cuantos kg pesa?

hi I have a stock pro 2 but have hacked firmware too get 20mph max . my question is will a 500w motor work on this with stock battery I know will run down faster but how fast and is the motor simple to fit or do I need firmware change

Can i use 2 36v battery’s in parallel to run a 500w motor will it decrease my range

the motor comes in a pack that includes a new controller and higher amp battery so u can go 60km an hour

Hi, do you know if it's possible to install air tires onto this motor?

Hey guys, I’m looking for help I’m running a 500watt motor on my mi pro 2 with standard battery, please can someone help me what setting should I use to get full potential as I can’t really feel a difference thanks

What will I need to reach 40kmh got the 500w moter and extended battery mine only gets up 2 20mph any help will be brilliant 👏 thank you

Hi. I'm changing my Xiaomi pro motor from 300w (original) to 350 w. Do i need to know something before i changed it?

yooo bro! nice video! i got now a pro 2 (32kmpu (brake lever) firmware) today i changed the front tire and now it makes the same sound as youre motor heheh... what should i upgrade for more speed pls help me out bro (stock pro2)

Hi Where can i find installation guide this motor in m365 scooter. There is difference in wires color between 500W and stock motor

Hi got 500w moter and upgraded controller with external 36v battery with stock 36v battery what is the best amp on sport mode thank you bro

Have pro2 stock 350w motor and stock controller if put 48v baterry not demage?

I wish I could understand this motor does not support a regular tire and inner tube :-( :-( -- I bought this same motor after seeing your video, and it really has more torque with the same battery and firmware, it is amazing.

When you say you put the 500W motor with a 12s battery did you use an external 12s and the internal or just a 12s internal? thinking of sticking a 500W on my Pro 2 🤔

please try the motor on the m365 pro cuz i saw a video of a guy going 70+ with 500w motor

Did you ever figure out why the motor was making such noise?

Was this test with stock controller? Iv got the 48v pack and a v3 controller and I’m looking to get the 500w hub but if it won’t reach 30mph I will just invest into something else

I'm going to prepare my M365 PRO for the engine upgrade with this 500W. If I stay with the original software and standard battery - Will I get more torque?

Hi. Did you finde a more beefy controller to handle the current?

Hi mate will I need a 48v battery to make my 500w moter work thanks

Hi bro i have ordered the 48v battery to fit in my scooter pricy😢 just wanted to ask you can i add a external range battery with this at all thank you i no your the man to ask 💯🙏

the 12s battery is connected parallel or series to the original battery???

Hallo i kindly as for your help , i have i pro 2 with 36v 24.4ah ( stock and external ) custom firmware with stock motor 950 watts pick with no problem . I am thinking about the monorim 500 w motor but i dont know what is the safe limit for watts , i ask monorim and i didnt get an answer . Normali with motors tere is the naminal power and pick is x2 , is that the case with monorim ? Can i set the pick to 1000 watts or more ? If iis only 1000 will i see a difrence between stock motor to 950 watts and monorim ? Many tnanks in advance . Keep up the good work

I got a brushed controler will that work ???

Hey i have a question I Want to put a 350 watt motor on my Xiaomi 1s. Can i just do it like just take the Old 250 watt off and put the 350 watt on? Or is there something i need to change with the batteri or some checking i need to do with the batteri before i do it or Can my normal Xiaomi 1s batteri get a 350 watt motor on it without any problems? And i have the newer Xiaomi 1s B.L.E 1.5.7 version.

where did you get the 12s battery

Can u buy a 48v 500w controller or?

speed is so low :( But acceleration not bad. 350w motor can 42 km/h at 42v(36) Speed 40-50 comfortable and this is the maximum possible speed without losing control. Better wheels is pneumatic cst 2.25 and 3.0

Hello brother where can i get bigger batery for my pro2? :o

What is the speedometer app you use?

i got a question bro, i have a stock m365, id like to know if i can straightswap the 250w motor with the 350w motor?

Hello sir. What is the differences of speed battery and range battery? Is it gonna affect also the controller of the scooter if I will add a bigger battery for my scooter?

O neplanuoji i AWD susideti viena ar gal net abu po 500W ? :)

I wish I would have seen this video befor my upgrade :)) ..Or I have seen it but I did not read the comments also... I Think I just burned my controller :) ..and I was so happy with the 35km /h. :) I upgraded the controller to monorim 48v and also battery to 48v (13s3p). I kept the original 250W (36V) motor. Accelerations was nice , speed enough for me, but it happen exactly like in your case ....at a moment display went off and will not power on again. I disconnected the battery , display turned on , but after few meters (I can feel it put power definitely ) display turn of and scooter stops abruptly. I wish I would not activate regen brake :) ... also I use minirobot app for settings and remove speed limit ...Guys, do you think there is a chance to repair my controller ? is it burned if it can deliver power / curent for few meters ? :) Should I buy another controller monorim , or better a bike controller that definitely can handle 500W as is rated ? this monorim is super tiny !!! I dubt can handle 20A as is written on it (48Vx 20A = ~ 1000W ..confusing ) . My bike controller that can handle 25A is 4 time bigger ... maybe is a better idea to buy a real controller (bike one) but then I have to install it outside .... and then maybe I have to upgrade also the motor to 500W :))) ... so only the frame remains ... as one guy said here...better buy from beginning a powerful scooter:)))) . actually I was pretty happy that with only 200 eur I upgraded my scooter to be zippier and faster.... only if I would know to deactivate regen brake :)) ...

What do you mean 12s ? Is it speed battery?

Hi can you help me with my firmware on mi scooter 3 i can't do the speed hack i believe its because i upgrade to tha latest version maybe?? Please help...

I installed this motor onto my scooter but the motor brake is insanely powerful and launches me into the air, did you have that issue as well?

I have m365 pro2 not additional battery only chip and goes 42kmh

Was it a 36v 500w controller?

It is it 8.5 inches?

Nice video ，can u tell me the diameter of the monorim motor without tire?

Hey man where did u buy the moter from??

Hi. Can you please send me link to good controller and the 500W motor? I want to buy something that was tried / tested. Thanks

My internally stock pro 2 with a flash goes 41

The controller died! The same happened to me with the monorim 500w during braking. So you have to do some adjustments in firmware to avoid this. I placed again the stock 250 w motor and a mi 365 pro controller and things are far better now

Is there a link to the battery pack?

What’s the red 31? An error message?

try to downgrade the bms to 1.2.8 and use direct power control, my pro 2 w 8,5 inch can go 35km/h, and w 10 inch 42km/h (fully charged)

You need to try the power based throttle, you can reach about 32 km/h with 250W motor (35 with 10 inch tyres)

whne using 500w 12s battery pack did you have to buy rita bms or just normal sorry if that didn't make sense thanks

hi i want to install this motor on my scooter for the extra torc will it install as i cannot change my firm ware can i plug this motor in and will it work as normal

My m365 pro is a year old, removed speed limiter an hour ago and I'm getting 30-32km/h on gps on stock battery and engine. Peak power is 700-800w and 300-450w constant. Not really more then with stock firmware. With stock firmware it would do between 250-400w constant depending on road conditions. Can definitely tell the controller gets warmer and motor to. I don't really use the thing alot and searching for cheap options to let it do 40-45km/h.

How you get battery 🔋 pack?

Has anyone tried the the rwd mod on this scooter and if you have what difference in handling have you noticed

Hey i think you are good in this.. I have 48V battery (13s) with controller reinforced 140A mosfets.. 350W motor ... CFW set to 25A current limit 65A... It spins 35km/h ... whats the case ? . On 36V battery i spinned 35KM/h...

That motor has better performance with 13S (48v) battery

change size tire 12.5 in app you will unlock speed

Hello did u tried with 48V battery ?

Anyone got firmware i can use ???

I'm not sure what is the point to have 5 km/h extra for all these risks of burn or extra modifications... With a pro 2 and tweak the firmware, you can reach 35 km/h... No need 500w motor, battery change, no risk for the controller. Am I wrong?

48v?

350W 53km/h on old 365

Hi mate my 500w moter dont fit my pro2 xaiomi any help

I saw 40 on your dashboard

habe 350watt motor und fährt 43kmh

LAbai idomu kokios temperaturos buvo konrolerio kiekvienu vaziavimu. Pats laukius 12s baterijos, esu uzsidejes 500w motora. iskart keisiu kondencatorius ir mosfetus i kitus,ziuresim kas bus

Tbh don't waste money on monrim engine because it's likely not as powerful as like ninebot v2 engine

1 manpower motor, 85kg battery pack🤣🤣

It is becoming dangerous now! be careful!