Xterra 3.3 Random misfire fix. 6 new Injectors replacement

Подписаться 100 тыс.

Просмотров 48 тыс.

50% 1

-Note: I'm not a sponsor of Walmart batteries.--
How are Walmart batteries?? My two year test : • Testing a $50 2 Year+ ...
Check out My Amazon Auto Accessories Store! Lets make that Weekend job less Painful!
www.amazon.com/shop/nathanroh...
Nathan is a participant in the Amazon Influencer Program. Your support is appreciated!
🔻Nathan's DIY Tools And Parts:
1. Kangaroo Original Standing Mat great for laying under autos : amzn.to/317yvZN
2. DEWALT Tools Set (192 Piece): amzn.to/2K04XZ42
3. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
4. Professional Socket Set: amzn.to/2Bzmccg
5. Ratcheting Wrench Set: amzn.to/2BQjj8A
6. No Charging Required Car Jump Starter: amzn.to/2CthnUU
7. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
8. Uniteco 1/2" Cordless Impact Wrench Kit, 18V Battery: amzn.to/2LxKVG
9. HD Nitrile Gloves: amzn.to/2KpGBaG
10. Fast Orange Smooth Lotion Hand Cleaner: amzn.to/2K0RCQ9
10. Mechanic Shop Towels: amzn.to/2JZuMIL
11. High 6000 Lumen LED Work Headlight: amzn.to/2ImLQ8i
12. Never wake up to a dead battery: amzn.to/2PQ0GcG

Авто/Мото

Опубликовано:

17 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@eggprantful Год назад

Thanks, took my Xterra to so many different mechanics, and none of them could figure out why the misfire code kept coming up. Finally took it to a tire shop and the in-house mechanic nailed it on the head- faulty injector #6. It's obvious that you have a lot of experience and knowledge about Xterra car maintenance!! Thanks for the vid

@FixingWithPassion Год назад

Nice!

@billbly1691 4 года назад

Always enjoy your channel look forward to seeing your videos thanks

@elyadg 3 года назад

Before I remover fuel rail I used an impact screwdriver on the cap screws. Worked perfectly on all intake bolts as well.

@FixingWithPassion 3 года назад

Best way!!

@jacobcopeland1922 2 года назад

That's what I was gonna suggest.

@AnonURnot 2 года назад

@@jacobcopeland1922 ?

@jacobcopeland1922 2 года назад

@@AnonURnot I was going to suggest using an impact screwdriver it's the kind you put on the screw and hit with a hammer or you can use an electric impact screwdriver nowadays just have to make sure you're pushing in kind of hard.

@lexi-conby 11 месяцев назад

i don't own a set of impact screwdriver so instead i use vice grips around the outside of the screw. has worked well.

@kicknsystm 3 года назад

I thankfully only had one stubborn screw. I put a baby vise grip on it & twisted until it popped. Worked for me.

@FixingWithPassion 3 года назад

Nice!!

@tuongee562 3 года назад

Well done!

@rrrrrafaell 2 года назад

I’m having an issue like that with my 04 Xterra, replaced 3 accesible ones with some from Rockauto and is shaking, heavy gas smell, acceleration problem so I read that if you have black dot injectors you have to get matching black dots on all unless you switch them all and same with the blue ones, sounds like my car has blue so I now will jump into taking all the injectors and the rail and replace them with all new black dots injectors and see what happens. Excellent video very helpful!

@FixingWithPassion 2 года назад

Nice!! Not sure why aftermarket injectors are such an PITA

@rrrrrafaell 2 года назад

@@FixingWithPassion very much so, I had to stop because of some rain here where I live but I have a big problem so far unscrewing the bolts from the right side like I don’t know where to start if I’m being honest and one of my Allen screws screw is stripped (left side near the accesible injectors)

@Ty_ThatGuy Год назад

I've been using Rockauto for years but found out the hard way that it's best to use them only for mechanical (i.e. brakes, rotors, hoses, etc.) but when it come to anything electrical/ sensors, what not, stay away from them. It's a roll of the dice if you use them for that. You more than likely received defective parts from them. They are notorious for sending those, trust me from personal experience.

@jameswalters673 4 года назад

You could use a impact screw driver for those injector screws may have Loctite.

@imemovengeance 3 года назад

A pair of small needle-nose vise grips on the injector screws work the best for me popped right off didn't have to do any Dremel

@FixingWithPassion 3 года назад

Nice!!

@MR.E820 Год назад

Also had a problem with random misfire. Turned out the Distributor bearing went bad and cause the problem. New Distributor and problem was fixed. Only happened with the engine warmed up. (acted like a vacuum leak)

@lexi-conby 11 месяцев назад

there's a small rubber bushing that goes between the injector and injector cap. it should only be able to go on 1 way. very easy for it to not seat correctly.

@togetunthemood43 7 месяцев назад

you are full of it.... mental strength

@johnstrickland2530 3 года назад

thank you sir.

@1985erikt 3 года назад

If you stick a slotted screwdriver through the c clamp over the tab, you can flip the tab so it holds itself open. It'll be fragile like a mouse trap though, so be careful not to clip your finger

@ScottandTera 4 года назад

I have a 302 efi , I feel your pain having to take the plenum off

@ranbymonkeys2384 2 года назад

For others watching do that fuel regulator that's on that fuel rail too.

@garydaledavis 10 месяцев назад

Thanks!

@FixingWithPassion 10 месяцев назад

Thanks!!

@javierpreciado3469 4 года назад

Thank you for making this video, I had a p0300 as well but it was first saying cylinder 5 misfire then it became random/multiple. I believe one injector is spraying entirely too much fuel so I will solve that.it already burned my o2 sensor and I replaced the cat. Wish me luck I really love the truck

@kicknsystm 3 года назад

I had that issue with my 2000 X-terra. Changed the distributor/fixed.

@joserms3 3 года назад

Man. I have the same issues. Replace the Distributer and spark and wires. I still have the same issue. Right now I’m diggin out the whole injector system and more than likely to replace them. I’m not sure if I can get away with flush them out.

@javierpreciado3469 3 года назад

Update the engine had a bent valve caused from misfire and it eventually blew a cylinder. Rip

@Bingster23 2 года назад

Hey Nate, question, I'm having issue on my Xterra 01 it Crank starts/drive but dies, I was wondering if you can help me narrow it down thanks in advance.. No codes Just dies...🤙🏼😎 great vids

@rrrrrafaell Год назад

Hey man, would you mind sharing some of your Xterra knowledge? So the new injectors are in (all black dot) but now it cranks but there’s no spark, sounds like something electrical, would you suggest what I could do? Any wiring idk that I could forgot, I just followed your tutorial. Thanks I’m advance!

@Tony-tk4ht 2 года назад

What kind of injectors you get? Did this solve the issue?

@gingertrodglen6730 Год назад

Can I drive my 2002 Nissan Xterra to your shop? It needs the fuel injectors replaced

@tilowol 2 года назад

I have 2000 nisan frontier 3.3 p0300 code random misfire OEM distributor spark plugs wires every time when I hit the gas pedal service engine start flashing rough running u think will be the injector??I Dont ahave a good scanner to check the injector

@hotflashfoto Год назад

My 2004 probably needs that. I dread working on this idiotic "design" where they run hoses, tubes, and electrical down the center of the engine.

@georgeburch1479 8 месяцев назад

Where should the injectors ohm at and what are Lil vacume hoses on back of rail the Lil ones broke off on my frontier and were leaking gas

@walter4723 6 месяцев назад

Once you get the rail out, use small vise grips on the screw heads, uncrack them, back them out and replace with M5.80 stainless steel and use a little antiseize- Enjoy!

@waddenwadden3272 3 года назад

Thanks for all the videos on this truck really been helping me a lot with mine ! I was taking it today to get some break work done and I started it up ran fine for a few minutes then started sputtering and stalled and wouldn’t start back up almost seemed like it was running out gas just wondering if you have any idea why the problem could be thanks

@FixingWithPassion 3 года назад

Check fuel pressure

@hanseich 8 месяцев назад

Great tips. BTW, those are likely JIS screws and not Philips. They are slightly different which is why conventional Philips bits struggle with them. Getting proper JIS bits could be the solution to getting those screws out much easier (rather than dremmle-ing as you mentioned)

@FixingWithPassion 8 месяцев назад

Nice to know!

@hmongboy9161 7 месяцев назад

what the torque spec for the injector bracket?

@leonidasmanouilidis9854 2 года назад

Thanks for taking the time to record So many videos on repairing the car. I have a vg33e frontier 4x4 and I am In the process of rebuilding the motor. Your videos have been a treasure to me. I took the injectors out of the fuel rail to have them properly cleaned in a shop. Then noticed there are 2 types of injectors one with a colored dot and one with out. Do you know if there s a specific sequence to be followed putting those back into the fuel rail. Thank you so much.

@FixingWithPassion 2 года назад

Not really. Just lube them with grease to let them slid in.

@noharley1619 Год назад

You can just use a drill gun with a Phillips head bit it easy just come out on out for me but you have to put a little pressure on it not too much just a little just enough to hold the drill bit in the said

@FixingWithPassion Год назад

Right. I do that sometimes also.

@mikiehall73 3 года назад

Dear Nathan, I could really use your help on locating where the fuel regulator hose connects to?

@mikiehall73 3 года назад

Is it near the two difficult hoses or away from it?

@coffeefish 4 года назад

I miss my VG30i. The Nissan was a cool ride.

@TimR1216 9 месяцев назад

WHERE DID YOU GET YOUR INJECTORS?!?!? Rock auto has them but they are pricey as hell

@finwall 3 года назад

What injectors did you order? I have a p0300 and have replaced 02 sensors, plugs and wires, distributor cap and rotor plus fuel filter. Local parts store has the injectors for 100 each and don't have the funds to pay that. Thanks for the great xterra videos and just awesome how to step by step to get it done.

@FixingWithPassion 3 года назад

Check your fuel pressure.

@finwall 3 года назад

Fuel pressure is good. The advice I got from a local shop is replace maf and injectors. That's why I was asking what injectors you got. Thanks in advance

@calambres6614 2 года назад

@@finwall how much did you get them for in the end ? I just had one go bad and I've already did everything you did

@MartianManHunter_ Год назад

Protip, remove the screws from the cap before removing the rail, or don’t even move the rail.

@FixingWithPassion Год назад

Like!

@jacobconn6040 3 года назад

What problem are you having? I think I have bad fuel injectors I'm not sure my truck is has rough idle and whenever I get in the gas it jerks the truck around a little bit I changed it to spark plugs a couple weeks ago thinking that might be it I wish I would have done the fuel injectors while I was at it I just didn't have the money at the time and I thought that spark plugs would have fixed it but I'm going to try spark plug wires first and then after that I think I'm going to do fuel injectors I'm probably just going to go ahead and get both and knock them both out what's your thoughts?

@FixingWithPassion 3 года назад

Injectors seem to be an issue at times. I'd try that first with OEM one's or some out of a 2nd xterra same gen. That fixed my issue.

@alexiscoronado6911 3 года назад

Hey Nathan, I need the fuel injector sleeves(seals) because they don't come with them, can you point me out where I can get them ?

@FixingWithPassion 3 года назад

E-bay good place.

@alexiscoronado6911 3 года назад

@@FixingWithPassion thanks

@noharley1619 Год назад

Did you ever change your gas filter out by your gas tank could you got one what about that too

@FixingWithPassion Год назад

I did change it but never did a video. It was pretty clean tho.

@crystallizer3437 3 года назад

Hi! nice video! Where's the link to the injectors?

@FixingWithPassion 3 года назад

E-bay buy only OEM one's!!

@crystallizer3437 3 года назад

@@FixingWithPassion thank Nathan! Can you share the link and your part number? I have a 2001vg33. 207k kms, but still on original injectors. After using liquimoly injector cleaner, misfires started.

@crystallizer3437 3 года назад

@@FixingWithPassion figured they needed changing anyway because they were in there for two decades. So the ebay link could help me out. 60 bucks for a piece or 5 pcs. Thanks in advance.

@edrod75 3 года назад

Did you replace that seal with new ones @ 13:23 min of the video, or you reused them?

@FixingWithPassion 3 года назад

I reused them. Just check for cracks and tears.

@edrod75 3 года назад

Thank you for the response, I'm just going to replace them all, I found them in the dealership.

@raiderman28 Год назад

can you pull out those fuel injectors on the passenger side without having to take all that other stuff off??

@raiderman28 16 дней назад

i am answering my own question..you can not. the angle of the injector will not let you get a good screwdriver on the end of this. Also, use a impact screw driver. the ones that you hit with a hammer to take off those pesky Phillips head screws. make sure to soak them with PB blaster a few hours before.. i got them out easily with out stripping out the heads at all. tap the screw driver into the Phillips screw a few times, and it impact actually spins, and does the work for you. on the Ellen head screws i put my 6 point head on the ellen bolt and tap it hard a few times to loosen the rust or corrosion and turn slowly with a large ratchet or breaker bar. coming out with my own video of pulling all this apart, even the knock sensor

@gaigem5660 4 года назад

Where did you order your injectors from because I need to change mine on my 2000 Xterra

@chomp520 4 года назад

Rock auto! 225$ for all six oem hitachi brand new ships from Bronx ny

@kicknsystm 3 года назад

I bought mine on ebay $85

@djjesse33 3 года назад

Autozone

@jordanfragoso3827 3 года назад

Did you have a running lean code?

@FixingWithPassion 3 года назад

Yea I cleaned the 02 sensor and it went away also..

@dimsi-nk3qq 2 года назад

Could these slots in the seals be allowing fuel to flood the cylinders? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cvRX8SgxC7Y.html I just replaced all injectors on a 93 d21 vg30e and it is running super rough/rich with black smoke out of the exhaust. The spark plugs are all fouled and wet. I didn't think to check if the old injector seals had these slots.

@WibbyKDX День назад

Don’t you have an impact screwdriver?

@FixingWithPassion День назад

Yea over there.

@selimyenahc3184 Год назад

So I took the injectors out to clean them and now there’s white smoke coming from the exhaust and it’s acting like a misfire but no codes. Do you think they are leaking by?

@FixingWithPassion Год назад

If it fumes burns your eyes then yes

@selimyenahc3184 Год назад

@@FixingWithPassion yeah it smells like gas. Do you think I need new ones? I just put new orings on. And how about putting them in? Should I try to tap them in deeper before putting the cap on? I just put the cap on and evenly screwed down each side of the cap.

@taxonomytaxontax Год назад

Same thing here about 2 days ago. New injectors, white smoke, fuel from exhaust, and cylinder flooding. Does this car need to be recoded to the ECU?

@jameslong1644 Год назад

I've got a #3 code the strange thing is it starts perfect no matter hot or cold drive it for miles and miles stop let it sit then start up and I have a misfire, it had a random misfire but I found a giant leak in one of the egr or pvc lines can't remember ran fine all the codes went away then the next day number 3 again and the smog test fail on my code reader. I don't really understand if it was a leaky injector the morning start should be bad but its the warm start. I pulled the plug it's perfect new wires new Nissan Distributor going to change the plug today but I doubt that is it. Any help understanding this?

@FixingWithPassion Год назад

Hi! Thanks! let me check something.

@jameslong1644 Год назад

what injectors are you using and are you happy with them? I can find oems right now.

@jameslee522 4 года назад

where did you get the injectors for $60?

@kaliphernandez5033 3 года назад

I buy the 6 on ebay for 60-63 for a nissan pathfinder 96

@TEAMsuede_ 3 года назад

@@kaliphernandez5033 for a 2002 xterra?

@jeremyewing2345 3 года назад

Where did you pick them up for $60

@nicolasarmendariz3053 3 года назад

Amazon 60 each

@ayodelesunday4264 3 года назад

Where can I buy the injector

@FixingWithPassion 3 года назад

E bays

@ragnaroksangel Год назад

@@FixingWithPassion Goddamn man, idk why it's so hard for you to get on your Ebay account, get the link for them, and paste the link here. There are a billion stores on Ebay. Just saying "Ebay" is not even almost helpful at all.

@ragnaroksangel Год назад

@@FixingWithPassion Sure didn't bother you to paste a bunch of unrelated sponsored shit, but god forbid people ask for the link to buy the injectors

@ftrillionisai474 Год назад

I’ve bought these injectors from eBay wrong twice because of bad sellers. Can anyone post the link of the correct ones to buy.

@uplift56 3 года назад

What pisses me off- is, that mfg uses cheap metal on these screws, causing these screws to bend like butter if the tool head is not a perfect! I am tired of crappy production! Why is the US allowing cheap craftsmanship on our cars that are supposed to be safe 🤪!