No video :(

XTool P2 CONVEYOR....Complete SET-UP And First Use

Подписаться 39 тыс.

Просмотров 19 тыс.

50% 1

Check out this exact XTool P2 laser here: www.xtool.com/...
XTool S1 Laser: bit.ly/484Z9oa
Check out the XTool Smoke Purifier here: www.xtool.com/...
Use discount code XTSD and SAVE $80 off on orders over $999.00 (US stores only)
Or.. Check out XTool's Website to see what laser fits your needs best: www.xtool.com/...
‪@xToollaser‬
XTool P2 Intro Video: • XTool P2....The ONLY L...
I am super impressed with this new XTool P2 Laser. Ive heard they are one of the best, and now I see why. There will be plenty more videos using this machine along with the conveyor system. There will be affiliate links below for everything in the video.
This is a great route to take to get started in the CNC market. This machine can do more than I can imagine. This video will cover the XTool Creative Space software and testing the laser out. Feel free to leave any feedback or questions in the comments.
Don't forget to SUBSCRIBE and check out the product links.......
AMAZON affiliate links:
-Caliper: amzn.to/42FybCb
-Resolene Leather sealer: amzn.to/3QxBBT0
-Keychain Rings: amzn.to/3FB4Xtu
Adjustable work table: amzn.to/3Fvwtse
Leather: amzn.to/3QN059F

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@SpicerDesignsLLC 5 месяцев назад

Check out this exact XTool P2 laser here: www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?

@HometownAcres 5 месяцев назад

Man that conveyor really opens up the door for some cool laser projects

@SpicerDesignsLLC 5 месяцев назад

Do you want me to bring it over?

@jimc31 5 месяцев назад

There is a pressure indicator built-in to the conveyor. It's on the roller section. it changes color based on the correct pressure.

@OneEyeCustoms 5 месяцев назад

Threw me off on the mid week release. So I watched it anyhow😊

@ulaB 5 месяцев назад

I have yet to use mine, but I have a few thoughts and suggestions (as RU-vid commenters do...): 1. Did you try using XCS in "Slats flat" mode with the tray not in the upmost position? I do think XCS will refuse to work with an error message. 2. Instead of guessing how to set up the pressure rollers check "Appendix 2 - Pressure levels recommended for common materials" in the manual 🙂. 3. For cutting with the conveyor feeder, using tabs is a really good idea. If parts of your cut pieces fall down they will block the conveyor mechanism. 4. With the conveyor feeder (and riser base generally) do take safety precautions, because the P2 becomes a class 4 laser. The laser beam can get reflected out of the enclosure and you'll only see that happen twice.

@SpicerDesignsLLC 5 месяцев назад

Thanks for the info!

@marcus_w0 5 месяцев назад

Hey Kyle, nice video! For laser cutting solid wood you should, instead of just flooring it and go slow once, speed it up *significantly* and makes 2 - 3 passes. With this method, much less heat gets transferred into the material, but were the laser hits gets vaporized and the piece has time to cool down. This results in a *much* cleaner cut without burning and way less charring.

@SpicerDesignsLLC 5 месяцев назад

I sped it up on the machine sign and it was much better. Thanks for the pointers.

@JohnSmith-tv5ep 5 месяцев назад

Kyle, still watching this video, but paused it to just make this comment B4 I forget. On the conveyor, you could make or purchase adjustable height feed rollers, like I use when running long boards or material through my table saw . Just a thought, now back to the video! ... Your welcome!

@SpicerDesignsLLC 5 месяцев назад

Thanks john ! Good idea

@sw6559 5 месяцев назад

I appreciate the in depth video about the conveyor system. You would think that the sacrificial metal bars or honeycomb tray would still be used so the laser doesn’t melt the supports under it. I think you just exposed a substantial design flaw. I was considering this conveyor but hold off.

@Grey646 3 месяца назад

The conveyor slats that go inside the laser during installation are made of metal, which this laser cannot affect. You can also mount the tray and I believe even the slats during the conveyor usage.

@JupiterMoJo 5 месяцев назад

What? A mid-week video? Such an overachiever! 😁🍻

@SpicerDesignsLLC 5 месяцев назад

Haha. Well i know the laser videos can be boring for my regular viewers. It wasnt bad though

@markblanchard5228 17 дней назад

In XCS software settings you can change units to inches.

@kenschopshop 5 месяцев назад

another great vid ! now i have more ideas on stuff to do with my wifes p2 , just need to get hers moved out of my shop and set up in her space once i finish that so we can set the conveyor up

@ChadCyr 5 месяцев назад

The "Machine" branding and logo is genius! Love it!

@SpicerDesignsLLC 5 месяцев назад

Thanks! I appreciate that. Im pretty exited about it. Im working on some other cool things i want to do with it and id like to start doing some cool giveaways too.

@ChadCyr 5 месяцев назад

@SpicerDesignsLLC Found your channel early on looking for a CK3510 review... Still haven't pulled the trigger on the f'n tractor, but I'm still watching your channel regularly. Lol You've come a long way. Best of luck!

@philburke1902 5 месяцев назад

Pretty cool addition. Also, can't go wrong with "Machine". Best of luck with the brand!

@SpicerDesignsLLC 5 месяцев назад

Thank you!

@JCWren 5 месяцев назад

Now we need one of those little keychain voice recorders that every time you press the button it says "MACHINE!".

@SpicerDesignsLLC 5 месяцев назад

Hah! Thats a good idea

@krissya6768 28 дней назад

Instantly subscribed just because you sound like me when figuring shit out 😂😂

@LichNosos 5 месяцев назад

Lovin the new machine logo. The first part of the "N" should look like your folding tape measure. Just a thought.

@SpicerDesignsLLC 5 месяцев назад

Good idea. I was going to do something like that but i want to be able to cut it out of steel without too much detail. But yes that would be very fitting

@remital6834 5 месяцев назад

Love the brand, "Machine", best of luck with the brand, I'm sure it'll do great. The conveyor is pretty cool, the fire was quite a surprise. You kept cool about it; you didn't charge in with a fire extinguisher or anything crazy like that lol

@user-qd2cp3sp6f 5 месяцев назад

Another outstanding MACHINE demonstration!

@Acc_220 5 месяцев назад

I bet the Indiana sign would have fed better with a wider maybe full width board.

@markknister6272 5 месяцев назад

I was so disappointed not to hear “Machine.” Then - Machine!!!

@LoansbyCurts 7 дней назад

Liked and subscribed. LIke your style, love the sarcasm!

@SpicerDesignsLLC 7 дней назад

@@LoansbyCurts thank you! Glad you enjoyed it. I try to keep all the videos entertaining.

@rantiksadventure1920 5 месяцев назад

Your the real Machine man keep up the good work.

@thecentralscrutinizerr 4 месяца назад

I bought this laser 4 months ago with every available accessory and haven't even unboxed it yet.

@SpicerDesignsLLC 4 месяца назад

Crack that sucker open and start making stuff. You just to busy?

@thecentralscrutinizerr 4 месяца назад

@@SpicerDesignsLLC Yeah. Home improvements. Wife wants a green house to ride out the Apocalypse. Solar Panels, guns, bullets, gold, silver, tactical nukes ... you get the idea. Nothing like nuclear fission in the morning. Everything a growing family needs!

@SpicerDesignsLLC 4 месяца назад

@@thecentralscrutinizerr you can never be too prepared. My wife shakes her head every time i come home with ammo. Its pretty much every time i come home though.

@phatmhan69 5 месяцев назад

Nice set-up and video. They should have designed it with rollers on both sides enabling it to go right to the edge ends and would allow two points of control for longer pieces. If you were doing multiple similar pieces, I wonder if you could fab a jig on the table such as two angle iron runners slid into the edge of the material to ensure they travel in square. keep up the good work.

@SpicerDesignsLLC 5 месяцев назад

I thought about a more permanent setup that would allow you to square the material to the machine. I will keep your idea in mind

@Mark.Anderhalt 5 месяцев назад

Excellent, Love the new Business Logo.

@SpicerDesignsLLC 5 месяцев назад

Thanks Mark!

@Atlantismonkey40 5 месяцев назад

A heat gun removes the store label really well.

@zedinator 4 месяца назад

Agreed, that is what I use and it works very well

@kiotimike 5 месяцев назад

Think the board had some cupping, which might be the reason for slipping ? I was thinking of your machine when we ordered these boards with events engraved on them for baby milestones. I was like pfft kyle can do a better job of these. 😂 That shop has all the goodies!. Cheers 🍻 Kyle

@SpicerDesignsLLC 5 месяцев назад

Thanks buddy. Ya that stuff is expensive too

@robertpulz1013 8 дней назад

Great little video can you advise how you stopped the the burning on the back side as i am having the same problem when using the conveyor

@SpicerDesignsLLC 8 дней назад

@@robertpulz1013 thanks! I havent done anything to correct it. Just trying to be mindful of it when setting up the material and layout.

@curtisharlan9230 5 месяцев назад

Hello I hauled fuel heavy equipment now bim 65 retired

@OneEyeCustoms 5 месяцев назад

That Machine logo is awesome! Nice job

@SpicerDesignsLLC 5 месяцев назад

Thanks Doug! Im pretty happy with how it turned out.

@appalachianman824 5 месяцев назад

Your new sub Logo is a cool design ! Cut it on your Langmuir too !!!

@SpicerDesignsLLC 5 месяцев назад

Thanks! I do plan on making a nice metal version for the shop buildout.

@Z-Bart 5 месяцев назад

And Theeeeeeeeen....Machine!

@timadamany 5 месяцев назад

The metric system is where it's at. USA...USA!

@paulsteiger8294 5 месяцев назад

Well done brother.....

@grafxbynando_vlogs 5 месяцев назад

You can run long projects but you still need at least 12 inches that you can't feed all the way or it will get off the feeder wheels

@grafxbynando_vlogs 5 месяцев назад

I wrote this before you said it on the video lol

@RBallarddesigns 5 месяцев назад

Run the project again but put masking tape over it. After it engraves you can spray it with black paint. It will really pop when you remove the tape. Machine rules!

@SpicerDesignsLLC 5 месяцев назад

Great idea

@grafxbynando_vlogs 5 месяцев назад

You can change mm to inches in settings

@Tim4111 5 месяцев назад

Who's mass producing the "Machine " merchandise? You or Lynn???😂

@SpicerDesignsLLC 5 месяцев назад

I might have to hire Lynn to do it. I want her to take over ALL of your garage space.

@Tim4111 5 месяцев назад

@@SpicerDesignsLLC I better put heat in the barn...

@UncleMattysGarage 5 месяцев назад

Logo looks great!

@SpicerDesignsLLC 5 месяцев назад

Thanks!

@UncleMattysGarage 5 месяцев назад

@@SpicerDesignsLLC I heard tractors in there, fellow Kioti guy myself

@SpicerDesignsLLC 5 месяцев назад

@@UncleMattysGarage ive got some good upgrades on the Kioti coming soon.

@GarlandFarms 5 месяцев назад

I'm waiting for a quote for a Thunder Nova 63 130W.

@gregsteiger7829 5 месяцев назад

Nice. Rise of the Machine! Awesome

@RBallarddesigns 5 месяцев назад

My Siri answered your question by saying “I don’t have a body”.

@BCummings 5 месяцев назад

How much is a 'smidge' in metric? Cool design, btw.

@buildlife 5 месяцев назад

Will it cook a pizza?

@EtchinAaronslaserworkshop 5 месяцев назад

Great fucken video brotha😊

@scotter_dotter 5 месяцев назад

Machine❤.

@patberry3388 5 месяцев назад

Do you need safety glasses on when usinng the conveyor system.since the machine has open areas when running? Thanks.

@SpicerDesignsLLC 5 месяцев назад

Its always recommended to wear safety glasses.

@charliehuntsman9827 5 месяцев назад

This is totally off subject and I hope you don't mind the question was looking at the same CNC plasma table was wondering what size of of air compressor you use for your table to handle the CFM and if I need to go with a compressor that is 120 V or would be wise to have a 240 V or whatever going to have tue primeweld cut 60 the out put is 80 psi for 5 CFM .

@SpicerDesignsLLC 5 месяцев назад

No problem. I made a video a while back explaining everything you need to run that table. Might be work checking out. I just use a cheap 30gal husky 120v compressor. But i have a 45a plasma cutter. Not sure on requirements for the 60.

@charliehuntsman9827 5 месяцев назад

Hey man thanks for getting back with me appreciate it !!! Love the channel!! I'll check that video out

@SpicerDesignsLLC 5 месяцев назад

@@charliehuntsman9827 ya no problem. Feel free to reach out if you have any other questions.