Trying the xTool Conveyor - challenges encountered

Подписаться 13 тыс.

Просмотров 11 тыс.

50% 1

Check out how I put xTool's claim of cutting and engraving up to 118” to the test, even without the full All-in-one kit on my the S1 diode laser. Join me as I experiment with the basic 39” conveyor and the essential riser base upgrade.
Thanks to MakeBlock for sending this xTool S1 conveyor for me to test.
UPDATE:
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
Affiliate Links:
If you use any of these links it doesn't cost you any more, and they give me a small commission as thanks.
FastCap metric tape measure (Amazon): amzn.to/47VwXnu
Conveyor system for S1 laser:
U.S.: shorturl.at/opNPX (xTool Discount Code: VW10)
Riser base for S1 laser:
U.S.: shorturl.at/FKZ46 (xTool Discount Code: VW10)
Get the xTool S1 here:
U.S.: shorturl.at/uLOXY (xTool Discount Code: VW10)
U.K.: shorturl.at/koqtF (xTool Discount Code: VW10)
If you're interested in the D1 Pro click here:
U.S.: shorturl.at/tJNV8 (xTool Discount Code: VW10)
U.K.: shorturl.at/jmnqD (xTool Discount Code: VW10)
Small Business Ideas with xTool D1 Pro: shorturl.at/dqCDZ
__________________
Buy materials for your laser (MakerStock): shorturl.at/fhiHI
- Use MakerStock discount code "VOELTNER10" for 10% off
__________________
Amazon Store Front: www.amazon.com/shop/voeltnerw...
Recommended videos for buying a laser engraver:
xTool S1 Laser Review: • I never expected THIS ...
Diode vs CO2 laser: • 40w diode vs 40w Co2 l...
Watch before buying a CO2 laser: • Watch this before you ...
Projects to sell quick and easy: • EASY projects to engra...
TIMESTAMPS:
00:00 Intro
00:29 Capacity of the laser conveyor
01:02 S1 Laser Riser
01:44 First issue with conveyor
02:59 Engraving a large sign on laser conveyor
03:45 Do you need a fume extractor?
04:24 Second issue with conveyor
05:20 Setup of long board with conveyor
06:50 How thick can you cut?
08:10 Metric tape measure
09:14 Another user error
10:35 Long board in conveyor
11:28 Using tabs on laser engraver
12:07 Thoughts on xTool S1 conveyor
#xtool #laserengraving #laserengraver

Хобби

Опубликовано:

21 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@VoeltnerWoodworking 7 месяцев назад

To add the xTool S1 Conveyor to your tools, use the xTool discount code "VW10" at shorturl.at/opNPX. Thanks for supporting the channel and leaving a comment.

@RyanNiemer 6 месяцев назад

Thank you for this video! I haven't really seen many videos about the conveyor system.

@VoeltnerWoodworking 6 месяцев назад

Glad you liked it. Thanks for watching.

@davidpike1047 7 месяцев назад

Great video as always Matt. Very informative and entertaining… as always.

@VoeltnerWoodworking 7 месяцев назад

Thanks David!

@baileythompson3680 7 месяцев назад

Always enjoy your videos.

@VoeltnerWoodworking 7 месяцев назад

Thank you, Bailey! I appreciate your support as always!

@coreydavoll7622 5 месяцев назад

Cool product! Great review!

@VoeltnerWoodworking 5 месяцев назад

Thanks Corey!

@drewpickard554 3 месяца назад

Great Video! I was wondering how well it worked and what the real world cons/hangups. I try to be realistic, which I feel like this video was. I hit the buy button on a xTool today with the conveyor, so really this is about what I expected real world from it. I have CNCs so I expecting tabs were going to be a thing. Now the thickness limit is well a bad limit, I could see using a sacrificial board under the workpiece could actually work out well, but half a inch doesnt leave much wiggle room for things like that

@VoeltnerWoodworking 2 месяца назад

There are some benefits for sure, but the thickness of clearance is a bummer.

@happymonarch 25 дней назад

I have apparently lost nearly all ability to use the internet. Can you please tell me what the assembled dimensions of the entire unit are with the basic conveyor system? I have one on the way and am trying to get my space ready. Thank you.

@oakfieldscreativeworkshop 7 месяцев назад

Another great video Matt. 👍🏻 what did you use to clean the resin off the board at the beginning?

@VoeltnerWoodworking 7 месяцев назад

Thanks Martin! It was actually just water because that was a UV coated birch. For most engraving I use water but sometimes denatured alcohol.

@skylinegt6 7 месяцев назад

Any recommendations on this S1 vs the P2? After watching your videos im leaning more towards this S1.

@VoeltnerWoodworking 7 месяцев назад

My P2 arrives next week. I have other CO2 lasers and can tell you it really depends on the type of work you want to do. For fiber engraving or stainless steel this is great. If you want to cut clear acrylic the P2 is the best choice.

@ytawn 7 месяцев назад

Where did you buy the large and long plywood

@VoeltnerWoodworking 7 месяцев назад

I get most of my hardwood and plywood from a local supplier, Houston Hardwoods. You can get sheets like this at the big box stores too, but it will cost quite a bit more.

@hypnicjerk7696 2 месяца назад

Operator errors encountered should be the title.

@VoeltnerWoodworking 2 месяца назад

I’m not hiring for a content editor at this time but thank you for the suggestion.

@GoCreateSomething 5 месяцев назад

Lol. Thanks for burning your bench so I don't have to burn mine!

@VoeltnerWoodworking 5 месяцев назад

Right?! Mistakes were made. 😂

@mrsinglingdon 6 месяцев назад

Not allowed the feeder un the UK so we cant get the full potential of the machine i feel conned and i2ve certainly let xtool know seeing as all the marketing is American you buy into it waste 2600 pounds and are just left limited to what i acn do with it

@VoeltnerWoodworking 6 месяцев назад

I'm sorry to hear that. Did it not show what options you had when you purchased the machine?

@darknessfierce4209 6 месяцев назад

I saw someone on RU-vid Pushing it through manually Somehow they connected it in the software by putting in a marker And a small overlap

@VoeltnerWoodworking 6 месяцев назад

@darknessfierce4209 very interesting. Would definitely take longer that way but sounds like it would work similar to the glowforge pass through.

@I-LOVE-EARTH 7 месяцев назад

Why does the roller come with goggles if xTool claims the S1 is a Class 1 laser? Why is there no mention of the goggles on the "S1" webpage, they just say goggles are not needed?

@VoeltnerWoodworking 7 месяцев назад

The bottom of the laser is exposed when the front/rear doors are down with the conveyor attached. If you plan on looking underneath you should use the safety glasses to prevent eye damage. The glasses are not needed if looking through the top cover. I hope this helps.