Go with a US make and model scanner if you have older American vehicles. For example neither my 1999 F-250 PowerStroke 7.3 nor my 2001 Dodge Dakota are supported by xTool with no data profile update in sight.
@@johnjauregui3528 Those should be supported but they may not auto detect, you have to manually input year make and model. That is a limitation of the manufacturers module.
@@737mechanic "Should be" but are not either by auto detect or manual. Clearly you don't speak from experience. Try a 2001 Dodge Dakota or 1999 F-250 7.3
@@johnjauregui3528 Your right I don't speak from experience as far as those exact vehicles but the experience I speak from is on vehicles before about 2000 a lot of makes and models will not autodetect with any scanner and I have seen people think there machine will not work because it isn't auto-detecting the vehicle but the reason they don't auto-detect is because the manufactures did not program the modules so they could be auto-detected. Did you send a report to xtool letting them know the problems so they can fix it?
@@johnjauregui3528 It depends on make and model. That was around the time when manufactures started programming their modules so a scan tool was able to auto detect the year make and model before that you always had to enter the year make and model manually on all scan tools. My first scan tool was a snap on MT2500 and there was no auto detect on any car.
For IMMO this scan tool has the best support than any other scan tool, the only thing better for IMMO is a dedicated key programmer, Ford module replacement yes. GM and dodge is year make and model specific.
No, this scanner is NOT auto auth compatible. They make an IP919 that is auto auth compatible, but it is not available on Amazon for some reason. Launch makes a comparable scanner that is auto authority compatible here. amzn.to/3VQ09I8 Remember to be able to use any scan tool on Chrysler products after 2018 you will need to purchase an auto authority 1 year membership for $50 and have a scan tool auto auth compatible.
@@SMOKEY-JAYS-DIESEL When I received the Xtool D9S Pro I was under the impression that all Xtool D9 scanners were AutoAuth compliant so I emailed xtool and they confirmed that the the D9 Was NOT autoauth compliant and they told me that the only xtool scanners that were are the IP919 and the IP900.
The D9S Pro is normally $1399.00 but it is on sale for $1099.00. amzn.to/4eQgFAM The regular D9S is the same price but it does have a $250 off coupon it looks like which brings it's price down to $849.00 amzn.to/4bDf3Hz
