XTREME METAL 

Very impressed. I have just had 4 delivered and tried straight away. Fantastic, the black base is also brilliant👍

Stunning, you have raised the game with these, I have to get some and try them out for myself. I wonder how they will look on smaller 40K miniatures, Thanks for the upload :)

Wow. I'm going to order some of these paints. They do look awesome. And I like they dry quite fast even if they are enamel based

I just got back into the hobby recently and saw these in my local store and bought the gun metal. Keen to see how it goes/holds up against other metalics out there

Do you need to use the black gloss primer with these paints? Looking forwards to trying them out against Alclad. Going to be starting a 1/350 NX-01 Enterprise and I reckon your titanium will be ideal for it.

These look very intersting, might have to give them a try.

I decided to try these paints as they seem to dominate in the market these days. Amazon and eBay sellers want $15 US a bottle. I don't care how good it is, it's not good enough to pay that much. So, I went to AK's website where they're a little over $5 a pop. I ordered six or seven colors, the thinner and primer. My wife said, wait till you see the shipping cost. It was about 20 bucks. Plus, and here's the best part, I submitted my order and had the paint in my hands in five days. With a packet of Haribo gummies. We're talking Spain to the U.S. Absolutely incredible customer service. Best I've ever experienced, and it was an international transaction.

Love those colors I must get some...

Ok I am sold and have to give these a try! Hate to have to paint black base coats using Alclad. Just hope this paint dries hard and doesn't rub off when you handle it.

What size of needle do you use? I tried the Chorme, and it is runing all over ... I shaked very well, I used the correct pressure ...

The chrome looks awesome. Where can we buy these in the US.

What pressure recommended for this AK metal? 2 bar / 20 psi ? Is it dry coat? To apply multiple coat do we have to wait previous layer to dry first or just apply another layer continuesly as in the video? Thanks

did some testing and had mixed results. I used your regular black fine primer and your protective varnish as a top-coat to make it glossy, then I airbrushed xtreme metal chrome over it and it just rubbed off in some spots. It sticks very well in some areas but rubs off with no effort at all in other areas. I also want to mention that the paint DEFINITELY dulls a lot when you clearcoat it. I used AK's own glossy protective varnish and it turned it from a mirror chrome to a kind of aluminium look.

What size needle/nozzle do you recommend? Can it be sprayed over acrylic primer?

I need a few different shades of a champagne gold. Are these mixable to gain that effect?

Dumb question. But does the polishing help get it smoother? I think I sprayed mine a bit too far away and now there’s a texture to it because some of the paint dried before it hit the plastic

Best primer? Best pressure? Best needle size? Great results though!

I'm looking at getting the SOVIET AIRCRAFT COLORS (1950-1970) which comes with the Xtreme Metal Aluminium and Xtreme Metal Dark Aluminium, but not sure which Aluminium would work best on a Mig 19 and Mig 21?

Do I need to dilate the paint further? I tried them on bare plastic and it looks too thin... and it does not cover the surface like what your video did.

These are the best metallic paints I have ever seen come along. Excellent for us model railroaders , I want some!!!!! D. Muse WTCMRR

Thanks..I'll give it a whirl!

Can I use the Extreme Metal colors even without primer?

How do they airbrush Chrome paints and gets an amazing surface? Every time when I tried to airbrush it, I got foggy surface and not shiny stains

Are these acrylic, lacquer, or oil based?

Can they all b thinned as paint is ?

Are these pre-thinned so they can be used straight out of the bottle and into an airbrush? Also, what PSI is it again? How does the aluminum compare to alclad when clear coated?

What paneliner are you using here? Thanks!

these paints are resistant to the touching?

What size Nozzle ? and what PSI ??? - WONDERFUL JOB ;-))

Other than the recommended "AK gloss varnish" could I use Future as an acrylic gloss varnish to protect the finish?

you have some example for metal pale burnt?, I seek and found nothing. i want a metal matte black finish.

Hello, i used these paints AK Xtreme metal for the first time to paint a Gundam. I would like to do the line panel and water decals to finish it. What i would like to know is, what kind of finish or clear coat/protector i could use to prevent the paint to rub or scratch when assemble all the parts? and should i do the first coat, then line panel, water decals and then do another second coat over it to seal all and protect? Thank you very much.

what size airbrush tip would be recommended?

Hi Can you use a Clear Coat afterwards for paint protection ?

How long before you can mask over the paint? First time using these. Using the WW2 USAAF color set of aluminums

Can I use Acrylic thinner or Lacqure thinner to clean my airbrush after using AK`s Xtreme Metal paints

do you sell them in a complete set?

Can I paint a color on top? What paint should I use?

What needle size do use and what air pressure

Muy buena pinta, me recuerdan a las Alclad, ¿las vuestras no necesitan una capa negro brillo como algunas de ellas?

About not using primer ... I am actually making some tests on different kit brands to familiarize with alluminium colors, so the result was sucessful only when I used black base. In other cases, the metal particle is so sensitive to surfaces, and it "reveals" cement/putty spots, rubbing or sanding draws that weren't visible before. The quality is extreme, literally, but the use requires some (basic) skill and experience to get an amazing ending. I'm happy in general with this product, but not agree at all with some parts in this video.

(I was wondering if Duraluminium would be good for a B-17 overall paint? While I look at this,it seems to come closest to what I have seen on real life videos and photos. Or am I wrong?

Silly question here but can they also be brushed on?

Hola,está pintura Chrome como se pule? Que tipo de material se recomienda si es así... Gracias

I was wondering if it could be applied with a brush too, i dont have an air brush

Do you need to use a primer first

One question: This paints need a black base ? Thank You.

Hola mig, con tu chrome metal no necesitas usar una superficie negra brillante de fondo? o se te olvidó en el video, otra cosa que deseo saber es? si para el uso de esa pintura como en las cucharas no necesitas usar un primer de fondo, finalmente los cloth con los que limpiaban y pulgas las piezas sin dejar residuos que marca son o si los vendes en tus productos también. Gracias por tu contestación de antemano

I airbrushed chrome over some Zero paints, then tried to buff it but it rubbed off. Is that because I didn't leave it to dry for long enough? I still need to assemble parts airbrushed with your chrome but I don't want it to come off. What can I do??

Can this be used to touch up a chrome light that has rusted in places?

Hello AK Interactive Official. Just saw the results on what these colours can do and i can say ia m shocked with the final results! Can metal parts be painted as well?? And if so how can i get my hand on of these special colours?

Should I wear a mask when working with Xtreme Metal ?

Will this work with a 0.3 mm nozzle?

At what Air Pressure do you recommend spraying?

So no primer?

I don't see the AK471 Black Base?? Am I missing something here??

Hi, this color are very impressive, I order it sameone, the most importat

What do you recommend for a Gloss coat for the "Chrome" ???

Can we apply it on kit using brush?

Sorry guys, but I am still having problems with the Xtreme metals. On the basis of your own video, and one of Flory Models who reviewed it recently, my Xtreme is *still* lifting with Tamiya masking tape. I know you had problems earlier in the year, so I don't know if what I have is of that batch, but it is not anywhere near as tough as your own site and Flory Models seem to suggest. Thankfully I didn't do it on my actual aircraft but a scrap wing: That said I have sprayed my actual model and am now reluctant to mask it. I used the black base and everything.

these are water based?

This is very good stuff and it looks great. However, nothing looks as much like aluminium like real aluminium. No paint, pigment wash, process, etc. is the same or as good. Applying Reynolds to a model is not as tough as some have made it out to be and the benefits are manifold.

Can you mix colors with these paints, I would like to get a great looking metallic blue by mixing the extreme metal chrome with sky blue from vallejo.

silver?

I truly wish you would joint venture with an English speaking RU-vid producer to make English versions of these. Your English subtitles are too small to be seen on my phone.

La couleur Chrome est pas bien ,la peinture part quand ont la touche pas cool