I wire up the optional battery sense pin to create a custom low power "battery mode" cable.
Parts:
- HF 6-pin connector www.powerwerx.c...
- OEM Molex type 6 pin connector (HF6) to Powerpole adapter www.powerwerx.c...
- Piece of thin wire. Try not to use something with many thin strands, or it'll make your solder joint look "fluffy" like mine.
If you have a nice crimp tool and want to create it without the preassembled cable, you'd need to buy two HF 6-pin connectors since each set comes with 4 pins and you need a total of 5 for this mod. You'd also need a 45amp Anderson Powerpole connector and some 12-14 gauge wire. Doing this would allow you to strengthen the joint further with something like a butt splice or heat shrink tubing.
21 авг 2024
