DIY installation video for the LED sequential turn signal lights on the Yamaha MT-07 2018-2020 model. We used this kit: retrofitlab.com/products/led-...
In this video, we install the LED sequential turn signal lights on the front section of the bike.
The colors and functions mentioned in the video during the wiring are incorrect. For the sequential turn signal lights:
Black = Ground/negative
White = Position/daytime running light
Blue/yellow = Turn signal (color depends on the side, for example, blue = right and yellow = left side).
The supplied adapter cable which connects to the original turn signal connector has 3 output wires, but only 2 are used (black/red) the other (green) one is not used.
- The black wire from the adapter cable needs to be connected with the black wire from the sequential turn signal lights.
- The red wire from the adapter cable needs to be connected to the blue or yellow wire from the sequential turn signal lights.
- The green wire from the adapter cable is not used.
The white wire from the sequential turn signal lights is for the position/daytime running light. A new connection must be made to the sequential turn signals using the supplied wire splicers.
We also have a video for the rear. Rear installation video: • Yamaha MT-07 2018+ rea...
The headlight retrofit kit with a Bi-LED projector can be bought here; retrofitlab.com/products/yama...
Any questions? Contact us!
www.retrofitlab.com
Retrofitlab.com
Tolweg 2W
3851SK Ermelo
Netherlands
#MT-07 #yamaha #yamahamt07 #retrofit #retrofitheadlights #led #projectorheadlights #aharon # sequential #Retrofitlab #headlight #improvement #customheadlight #custom #lighting #light #diy #turnsignal
1 ноя 2022
