Extremely good product. Love the fact that it uses all the stock lights. Took about 1.5 hours to install going slow. Looks amazing. thank you for the install video.
Just wanted to say this was an excellent video, down to the pain in the ass rivets in the corner of the undertail upon final assembly. You actually touched on every snag I came across in the install. The kit is nice, though the spacer rings provided can crack if you’re not extra careful. Mine did, but they still function the same and you can’t see it when installed.
Just finished mine. Solid, well-made kit. Unfortunately, I snapped one of the spacers trying to ham-fist it on but made it work since they only function to take up a gap. You can be rougher with the turn signal stalks than you might imagine. They are a tight fit into the eliminator bracket but will go with enough persuasion. I gave up on the final two smaller plastic push rivets. Maybe someday I'll try again. For the nut partially blocked by the brake light connector, dab a bit of grease onto the nut, stick the nut into your socket which will hold the nut and then make your approach with your socket while pushing the connector off to the side. Seemed to work pretty well. Definitely recommend if you want to keep oem lighting.👍
Bought the kit because the video was extra good. And the kit looks like it came on the bike, uses the stock signals and has no exposed wires. Super happy! Makes the bike look so much better. Took me about 2.5 leisurely hours, but worth it.