No video :(

Yamaha MT09 2022 GB racing engine protection kit install - Part 1

Подписаться 121

Просмотров 3,3 тыс.

50% 1

Installing GB racing engine protection kit on my MT09 2022. Fairly easy to install but keep in mind to be careful with the threads, and torques specs
Enjoy the video and give it a like if you like it! Subscribe if you haven't done yet :-) Thanks!
I used to film this video:
- Samsung Galaxy Note 9 with external mic
PS! Please be advised that this video content is for information purposes only. Use at your own risk
Have a nice day/evening!

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@kurc24k76 14 дней назад

For 2024 MT-09 there is no bracket on the alternator cover bolt so there is gap between the cover and the engine, glad I watched this video before tightenieng it, need those washers, wish they would include a couple in the set

@Konrad_Adenauer 18 дней назад

Thanks for the video! Just installed the same covers on a brand new mt-09 SP. Just wondered how loose the original bolts are. So 10 N m might be real. But I tightened it to 12 like you recommended, except the water pump of course. Hope that is correct.

@davidd6849 Год назад

Looks very good 👍 nice progress on your bike

@swedrider Год назад

Thanks! Ya the most important is to feel a bit relaxed when the bike is more protected

@49cc_aljarafe88 2 месяца назад

hi,do you have to drain the oil from the engine or coolant ???

@swedrider 2 месяца назад

Hi, no. Some coolant drops will come out but not much. So nothing to worry about. Thanks for watching!

@Adams-KH 9 месяцев назад

Hey dude so can you explain me which part is 10nm and which is 12? Thanks buddy!

@swedrider 9 месяцев назад

Hi, the service manual on page 2-12 states the following Generator cover bolt M6 2 12 N·m (1.2 kgf·m, 8.9 lb·ft) Generator cover bolt M6 8 12 N·m (1.2 kgf·m, 8.9 lb·ft) Clutch cover bolt M6 11 12 N·m (1.2 kgf·m, 8.9 lb·ft) This is how you should tight them. The manual from RG Racing states 10 N.m which I dont recommend Have a nice weekend

@chipwood67 7 месяцев назад

I have the same kit.. There are 2 copper washer in diagram for secondary water pump cover bottom bolt .. Whats your thoughts..it say original copper st - s bush standard bush- New supplied copper washer.. I've not installed yet.. Thanks

@swedrider 5 месяцев назад

Thanks for watching! Let's trust that the kits are made to fit exactly. Then you should be able to use the original copper washer. I did it with mine ☺

@chipwood67 5 месяцев назад

Hi all installed covers.. No leaks all good.. I know this is off topic.. As I have the same bike as you and color.. Can I ask does the arrow and dot line up with your clutch arm and on clutch cover .. Or are they slightly offset.. Or and only line up when the clutch lever is pulled in.. I have clutch judder at biting point.. One member on Mt forum says there's lines up until clutch pulled in then it's offset.. Like I say mines the opposite.. I bought it like this and judder on first movement setting off ..bike has 4000 miles Thanks for any help

@swedrider 4 месяца назад

My pleasure! do you have any photos or video I can see so I can help you?

@gbracingengineprotection 7 месяцев назад

Hi, great video, but unfortunately these products are all counterfeit. The material used will be significantly inferior to the genuine GBRacing material, and so unlikely to do the job of protecting your bike in the event of a crash. If you order the genuine GBRacing products, from us or one of our official dealers on our website, the weight difference between the two products will instantly be apparent. We work very hard to provide motorcyclists around the world with the exact same quality protection as used by World Superbike teams. We appreciate you promoting the GBRacing brand, so if you get in touch with the office we can discuss sending you out a genuine GBRacing set, made entirely in the UK. Thanks!

@swedrider 7 месяцев назад

Hi, thanks for watching! The purpose of the video is to share knowledge. But sure the quality of the things we want to have on our bikes should withstand. It would be nice to get in touch and talk about your products. Thanks!