Yamaha PSR-2700 faulty LCD display repair tutorial

Подписаться 42

Просмотров 9 тыс.

50% 1

** BATTERY CONNECTOR ** - s18.postimg.org/7g3g4c6eh/bat...
One day LCD display of Yamaha PSR-2700 stopped displaying text
It was still backlit in green, but there wasn't text displayed.
So it was difficult to see what parameters are set for song.
I have found similar problem for this keyboard and possible
solution www.yamahaforums.co.uk/forum/v..., which I have tried. It came out that 2 capacitors on back of LCD display were faulty.
Also the keys were not smooth anymore and I've fixed it.
Volume knob also was adding some scratches during operation - fixed.
Disassembling took about 1 hour (with making pictures).

Опубликовано:

7 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@lamarinaelche 6 лет назад

Thank you so much for this video. I noticed my PSR 2700 display going faint but text appearing faintly the longer it was left on. Now, after being stored for a while, I checked it and the display still lights up but no text on it at all. I was wondering whether it was one of the board connectors, but well spotted on checking the forums that C1 and C2 had gone u/s. I have no problems doing the repair, have repaired many radio's using soldering so I thank you so much for taking the time and trouble of making this video and highlighting different screws and possible pitfalls a lot of us discover a little too late if we're rushing things in eagerness! I am sure that there are many of these having been scrapped because owners thought they were no good with LCD screen not functioning. Cheers!!

@kvideos8313 5 лет назад

I'm glad, it helped you!

@mcstando 2 года назад

I replaced those caps and lcd works again. Very helpful video, I lost few screws while putting back plastic cover so be careful while assembling keyboard back.

@kvideos8313 Год назад

Cieszę się, że film był pomocny.

@jackmdrider3340 2 года назад

Thank sir

@user-wk9lx9xt4k 5 лет назад

My problem was Bad welding wire inside the keyboard. Thank you

@kvideos8313 5 лет назад

I hope the pictures helped you open your PSR2700 anyway.

@user-wk9lx9xt4k 5 лет назад

@@kvideos8313 of course Thank you!

@Saddenis 7 лет назад

Thanks.

@kvideos8313 7 лет назад

I risked little bit, cause there was mess inside, but I made a picture of everything and now LCD display is working and keys work smoothly. I also repaired volume potentiometer as it was giving scratches. The biggest challenge was one of the legs in one ribbon, which was curved. I used small pliers and straightened it. Just make pictures which screws go where and keep them in separate containers and you shuold be good.

@kvideos8313 5 лет назад

You're welcome!