No video :(

YAMAHA RAIDER 240MM TIRE SWAP!

Подписаться 5 тыс.

Просмотров 28 тыс.

50% 1

Let the mods begin! This episode, the 2017 Yamaha Raider gets a new pair of shoes, DIY style! I went with the Dunlop Elite 3 tires. Tire sizes are included in the links below.
I demonstrate the entire process step-by-step without removing the rear fender. I will break steps down in their own videos and create a playlist with all of them, but until then, this is a long one, so grab your favorite beverage, kick back, and enjoy!
Low & Mean Fat Fork Kit Install: • YAMAHA RAIDER FAT FORK...
#motomondays #yamaharaider #240mmtireswap
Links:
Dunlop Elite 3 240/40R18 Rear Tire: amzn.to/2YaGQKA
Dunlop Elite 3 120/70R21 Front Tire : amzn.to/2J8t1Ge
Rancho RS1952 Shock Boot: amzn.to/2XGgymu
Craftsman 450-Piece Mechanic's Tool Set: amzn.to/2X2c9uS
Extreme Max 1000 lbs. Motorcycle Scissors Jack-Wide: amzn.to/2X3j5rk
Goplus Motorcycle ATV Hydraulic Scissor Lift Jack Stand Quad Dirt Street Bike Hoist 1500 Lbs (Black): amzn.to/2WYF1UG
Video Capture:
Sony A6000: amzn.to/2BOziUF
SmallRig Cage: amzn.to/2Xk5fNZ
GoPro Hero 5 Session: amzn.to/2HKOqXY
GoPro Hero 4: amzn.to/2GZ09kA
Tascam DR-40: amzn.to/2BPMPeH
Zoom H1: amzn.to/2H2PZPX
Audio-Technica Shotgun Microphone AT875R: amzn.to/2Errj1S
Audio-Technica ATR-3350IS Lavalier Mic: amzn.to/2HOO1nh
Lanpart Battery Pinch: amzn.to/2ErTZYn
Comer V-Mount Battery: amzn.to/2BNCct5

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@lozalazairosky200912 9 месяцев назад

Thank you very much for explaining so professionally I will change my tires myself thanks to you in Miami they charge me 300 dollars to change the 2 tires on my 2011 Yamaha Rider it is a lot of money😊😊😊

@TheTSFChannel 9 месяцев назад

I'm just glad that the little I do here on the TSF Channel helps others to crush obstacles in their lives. I appreciate the kind words

@yogalife11 3 года назад

You can use a long zip tie to hold the caliper bracket in place when getting the wheel to go in place. Then cut the zip tie once you have put your bolt in the wheel.

@cvee2614 2 года назад

Great video thanks. After doing a belt adjustment, I normally tighten the nut securely, lower the bike to weight on wheels, then torque.

@dangalli1 23 дня назад

Thanks for the video! You actually don’t need to loosen the belt tensioner's though...

@TheTSFChannel 22 дня назад

Check page 4-32 of the service manual. "Removing the Rear Wheel (Disk)," Step 3. How else do you relieve the belt tension to remove the wheel?

@dangalli1 21 день назад

@@TheTSFChannel You really don't have to release the tension, believe me I've done the procedure without relieving the tension. I didn't think it could be done without relieving the tension but it absolutely can. Saves 2 steps. Relieving and re-tensioning...

@cowdudeable 4 года назад

I have the 2008 model which, I assume, is the same thing. With stock mufflers, which I kinda like, it is much more difficult to reach the right side of the rear tire. But, thanks to your video, I have decided to let somebody else do this work. This is another reason that these videos are valuable. Thank you so much.

@TheTSFChannel 4 года назад

Your stock muffler comes off super easy. You just need to remove the rear half... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-U-bYfAwZMPQ.html

@mattmoyer1912 Год назад

Thanks for the walkthrough man. Just did a rear wheel replacement on my 2012 raider.

@johngraham5722 3 года назад

I don't think you're fender likes you anymore???💗great work thank you

@chauffeurmarco 4 года назад

I wanted to install the 240 but changed my mind. Maybe next time. That’s if I keep my Raider then.

@jakboom5013 Год назад

Your the man, this is a “how to video” done right.

@gilbertsantiago2921 3 года назад

Thanks for your video ! I recently get my vStar 650 / 2004 and that going to be my first upgrade!!

@chauffeurmarco 5 лет назад

I just wished that we could get a 35% instead an other 40% witch raise the bike about one inch. I automobile we find this easy. I don’t know why can’t we get this with bikes. Here in Montreal it’s hard to find bike shops. Dealers don’t do mod on bikes. Down the states there is a tone of it because it’s hot all year long. Here it’s season pleasures and not worth it to open that kind of shop. Just grinding the guard for clearing the edge of the tire, dealer won’t do. Pisses me off. If only a could be allowed to cross the borders but I can’t. I really envy you guys down there.

@ryanfarr6350 11 месяцев назад

I'm doubting its a 240 after no money shot!?! Why would you cut out every direct shot from behind the bike to see tire width?

@TheTSFChannel 11 месяцев назад

At 30:53 during the rear brake install, you can read the damn tire size on the sidewall 🤣

@ryanfarr6350 11 месяцев назад

@TheTSFChannel so why not show the profile from directly behind the bike, which is the best angle to show tire width? Lots of wasted time yapping on your channel. And why the foul mouth? I didn't want to read the tire size on the sidewall. I wanted to see the rear profile on the bike, but it seems to me like you intentionally cut out for some reason. Anyway, I won't be wasting any more time on your videos.

@TheTSFChannel 11 месяцев назад

@@ryanfarr6350 There are so many photos of Raiders with 240 tires to look at. 🙄 Sharing mine would look just like the others except my plate would also be in view, and I can't allow that. Anyway, buh-bye...!

@dangalli1 3 года назад

Thanks for posting this video, it really helped me when I removed and re-installed the front wheel, on my '06 Yamaha Stratoliner!

@TheTSFChannel 3 года назад

Awesome!

@shinyokoyama948 Год назад

Thank You I could not figure out how to get the Caliper bracket on for the world. When I was younger I might have got it on using my muscle but i am 65 so his was a much better way to go.

@TheTSFChannel Год назад

I'm glad the video helped. I appreciate you taking the time for feedback. Thank you!

@MrLiesAngeles 2 года назад

Great video but you are not showing off the width of the tire from behind and low. You keep cutting that out or skipping it. Watched this 2x waiting to see how much it fills up the rear wheel well from behind. Take 10 steps back, get lower and show us that fat rear.

@TheTSFChannel 2 года назад

Stop the video at 32:01

@motorcyclemichael2182 2 года назад

@@TheTSFChannel almost can see it

@ChaosTrader63 4 года назад

Great vid man and awesome bike! I am hunting for a Raider right now!

@pk8798 4 года назад

Lovely bike you got there! Will add video to my library for the time I got this baby in the future :)

@reyes2950 4 года назад

great video man, I own a 03 warrior but i love the Raider

@johngraham5722 3 года назад

What happens when you put mama and storage on the back and your weight just your shock question

@TheTSFChannel 3 года назад

It's not an issue. She refuses to ride since the kids. The 240mm tire raises the back end some, so I'm looking forward to dropping in that slam kit sometime this winter.

@bryangrant2636 4 года назад

I just subscribed Your videos are the bomb I picked up a brand new left over 2015 RAIDER in August of 2018...I'm digging you bike, looks awesome I'm going to be doing the exact same mods...lol, starting with exhaust and tires...keep the vids coming I'm looking forward to the handle bar mod...

@TheTSFChannel 3 года назад

Thanks for the sub!

@gvicvic569 3 года назад

A real wanna be mechanic would've swapped out the tire- whats a little scratch to the rim? Really good video. Thanks for posting.

@TheTSFChannel 3 года назад

🤣🤣🤣🤣

@earthsurfer13 4 года назад

I hope you kept the swept back bars. Looks great!

@TheTSFChannel 4 года назад

Still have the OEM bars. Thanks.

@RossMalagarie Год назад

TSF Channel I would love to get drag bars for my 2012 Raven Raider S but I love the look of the stock risers and since drag bars wouldn't line up in the middle where the stock bars are the stock risers would not connect to them.

@TheTSFChannel Год назад

I was really interested in the LA Choppers 5.5" risers for 1 1/4" bars (amzn.to/3DYyj4X). I liked the idea of more pull back with a straighter drag bar, but with all the crap I have mounted on my bar, and after swapping the grips to these black, Kuryakyn Grips (amzn.to/3SZXqZq), most of the real estate on the bar is taken, and black. Photos here: facebook.com/groups/YamahaRaider113/permalink/10159878889178162/ There's a RU-vidr in Europe on a Harley Breakout. His cockpit is clean even though his cables are routed externally with a drag bar. You get a good look at it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FgwI3HT4T2w.html

@RossMalagarie Год назад

@@TheTSFChannel I have those Kuryakyn grips but mine are chrome with black pads

@MrJunior82006 4 года назад

Great video. Love my Raider! Also running the 240 rear tire. Good choice. I think we have the same exhaust also. Freedom performance sharp curve? Awesome sound on that monster motor!

@TheTSFChannel 4 года назад

Thanks 👍

@MrJunior82006 3 года назад

@andrew walker I run the Michelin commander 2 and I think they have a new model out now also. For me and my riding style it’s a good compromise between grip and wear.

@sid540 3 года назад

Are you using the original rim which came with 210mm tire for 240mm?

@TheTSFChannel 3 года назад

Yes

@Williamchang23 2 года назад

Thank you for sharing. I have a 2012 yamaha stryker. Would you say most of the process of removing both tires be similar? Also the link for the front Dunlop tires are no longer available for sale. Is there another Front Tire you recommend?

@TheTSFChannel 2 года назад

I haven't researched the Stryker and its build. I would search Stryker forums, FB groups, and other social networks for Stryker specific info.

@scottrhinehart6704 2 года назад

Where did you buy the tire from ? I can't seem to find it anywhere. Thanks

@TheTSFChannel 2 года назад

Did you check the links in the video info? That's where I bought them from....aaannd they're out, too. Wow.

@stevematthey4557 3 года назад

Got 09 Raider, put 240 tire on mine. Ride more comfortable.

@ortega8724 2 года назад

I have an 08 would it fit just fine?

@eapicou74 2 года назад

Hey good vid. Where did you get the les turn signals from?

@TheTSFChannel 2 года назад

They came on the 2017 Raider

@jamesbrace3212 4 года назад

Awesome video! I got a Raider a few months ago & want to do mods. Do you have a video on your exhaust? What kind? & how to? Did you have to re map the fueling?

@TheTSFChannel 4 года назад

Freedom Performance Sharp Curve Radius install: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-U-bYfAwZMPQ.html I want to do the Ivan's flash. Saving up.

@albertodeulofeu5277 3 года назад

I have an ‘09. Dont they come stock with a 240 like the V-rod? I could’ve sworn my rear tire is a 240.

@TheTSFChannel 3 года назад

Nope. A 210mm. That's why the Breakout looks a little more buff.

@albertodeulofeu5277 3 года назад

@@TheTSFChannel can you make a video on how to change the rear blinker? One of those things snapped off and I can’t find a video anywhere online on how to fix it or swap it out.

@TheTSFChannel 3 года назад

@@albertodeulofeu5277 This link has the exploded diagram of the turn signal assembly... www.adeptpowersports.com/oem-parts/yamaha-rear-flasher-light-assy-2-5c7-83340-00-00-part.html?gclid=Cj0KCQiAwMP9BRCzARIsAPWTJ_FHycKhDKg-uHQ3X4BEO6aq46xDwoFEd9aZ4etJWSNH1r6t71p9EFwaAn42EALw_wcB

@albertodeulofeu5277 3 года назад

@@TheTSFChannel thank u sir

@TheTSFChannel 3 года назад

@@albertodeulofeu5277 😊

@Luna20250 4 года назад

240 on original rim or spread to 8.5? thanks

@TheTSFChannel 4 года назад

On the original 7.5" rim. Yep, the bike got higher. Next up: Slam Kit

@R3N1R3N 2 года назад

Dude is that a smaller rear pulley?

@TheTSFChannel 2 года назад

Nope. Stock.

@trojanwar2 4 года назад

Excellent Video, Thank You!!

@TheTSFChannel 4 года назад

You are welcome!

@RP-xk8ji 5 лет назад

Nice raider bro

@Bondarms410 4 года назад

Question... Will a stock Raider out run a stock 114 Breakout ?

@TheTSFChannel 4 года назад

The forums go round and round with that question...

@TheLm43 4 года назад

Do you have lowering links on it?

@TheTSFChannel 4 года назад

Not yet. Coming in the next two weeks. Will do an install video.

@cvining33 5 лет назад

Good lookin bike! Do you think I can put a 240 with a slam kit on? I have stock rims.

@TheTSFChannel 5 лет назад

Hey thanks! Yes, plenty have PCS slam kits or others. I plan on dropping mine a couple inches to makeup for the additional height the 240mm tire gave.

@briankeck3762 5 лет назад

cvining33 Yes you can, I have a 240 and the Barons slam kit.on my Raider. Go to the Road star Raider forum, there are plenty of pics of slammed Raiders with a 240. www.roadstarraider.com/index.php

@jeffgarcia9982 3 года назад

I have a 2007 yamaha v-star 1300cc and I'm currently running a tire size 200 on the rear. Do you know if I could run a 240 on the rear without doing any major modifications?

@TheTSFChannel 3 года назад

You should be able to google that and read what's possible in the #vstar forums. www.starbikeforums.com/threads/has-anyone-tried-a-wider-rear-tire-on-the-950-or-1300.1234/

@jeffgarcia9982 3 года назад

@@TheTSFChannel I just got done reading through it. Looks like you'll need a 240 tire kit for this one. Thanks for the link 👍

@antonmaclean8418 4 года назад

Nice

@clohase1468 4 года назад

Have you rode with a passenger does it rub.

@TheTSFChannel 4 года назад

No I haven't. The bike rides about an inch or so higher because of the stock rim.

@clohase1468 4 года назад

@@TheTSFChannel ohh I see thx for the reply

@MrJunior82006 4 года назад

I have an 09 Raider and frequently ride with my girlfriend on the 240 rear tire and it’s not even close to having a clearance issue. Granted she’s only 100 lbs but still there is plenty of clearance.

@joelsuarez4251 5 лет назад

Where did you get the Gators Boots ? been wanting to get those

@TheTSFChannel 5 лет назад

Check the companion video for the fat fork kit: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ikh9olSKbyw.html

@TheTSFChannel 5 лет назад

Rancho RS1952 Shock Boot: amzn.to/2XGgymu

@chauffeurmarco 5 лет назад

I own a 2008 and look for a 2017. I’ll wait next year for that. I’m so sad that they stopped doing it. It is almost a perfect bike if it wasn’t for their shitty horns. On the highway we can’t heard them. I’ve changed them last year and try the screw adjustment but they don’t get louder. HD the king? Not in my book. Japanese build better bikes.