No video :(

Yamaha waverunner XL800, XL1200, fuel sending unit issues

Подписаться 2 тыс.

Просмотров 26 тыс.

50% 1

If you find my videos helpful consider buying me a coffee via Cashapp $Shadetrejetski
amzn.to/3PdC7lW --1/4 inch ID Tygon fuel hose
If your jet ski surges it probably has an air leak in the fuel system. In this video I show some common things to look for when inspecting fuel components.
This video is a personal documentary of my work and is NOT a "how to" video. As such you should never try to attempt to do any of these repairs without proper training for which this video is no substitute.
If you find my videos entertaining and would like to support my work my paypal/ email is moate1@msn.com
Disclosure
This section contains Amazon affiliate links. If you purchase through my link I will get a small commission from Amazon.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@ShadetreeJetski 2 года назад

Ok so I looked around. There is a guy who sells just that rubber top seal...no clamp for 75.00 on ebay. Too pricey for me but less expensive than a new sending unit. You really need a cv boot clamp to replace the old one as the area of rubber is not as wide as a standard clamp in that size.

@donho7857 Год назад

Thanks for your knowledge and skills. Very helpful video.

@ShadetreeJetski Год назад

You are welcome. I did another video on rebuilding these as well.

@danielbrown7780 2 месяца назад

Hey sir! You are very knowledgeable with these ski's. Is there a way i can get in touch with you for some questions or some work done. Let me know olease

@BIGMARKF11 2 года назад

Hey thanks for the information I have an XLT 1200 and a GP 1200 I have taken them to several mechanics and they could not find out why the Jeske surge from lack of fuel now I know why thanks for the information if I would’ve seen this video a while ago it would’ve saved me thousands of dollars thanks

@ShadetreeJetski 2 года назад

This is the reason I make videos. To share knowledge and to learn more from the comments section. The guy on ebay sells just those boots for 75.00 which is still a big savings over replacing the entire unit. I hope you get yours fixed soon.

@myskiis2fast4u Год назад

Excellent find and tip

@seandaly9361 Год назад

You just beelined it to my issue today thank you.

@shannonwilliams601 2 года назад

Don't forget to replace your rave valve Clips with the new lever links because the pin will vibrate out of the factory ones and it will drop the rave valve into the engine

@latunguley 2 месяца назад

I really appreciate what you're explaining great video! I'm only halfway through. My 00 XL limited is loud beeping and no start issue. Thinking maybe the sending unit is failing me, and I was surging last summer.

@ShadetreeJetski 2 месяца назад

Loud beeping can be low oil, overtemp or limp mode I think.

@RealSuburbanCowboy 9 месяцев назад

A mixture of Alcohol and peppermint oil will also bring hard rubber back to life. Plus it smells minty fresh. It should help keep it from breaking any more.

@shannonwilliams601 2 года назад

And always watch out on top of your pump sending unit in those little elbows that are aluminum there are O-rings on the bottom if one of those leak it will fry your motor as well

@RefinedMayweather 2 дня назад

Hey what’s the meaning of an out of control rev? Say I hit the throttle and reach 4500-5k rpm all of sudden the ski revs up high on its own. Without me pressing the throttle at all and will hold that high rpm. Only way to get it down is pulling the choke to flood it. Is that an air problem?

@AchikSarih 2 месяца назад

Merci beaucoup ❤❤❤❤❤❤

@cobeygraves3588 2 года назад

So I got a 2000 suv 1200. It’s only running on reserve. No fuel flow to the carbs in the on position. But put it on reserve and it cranks on the first spin.

@ShadetreeJetski 2 года назад

Your o rings are bad on your fuel selector switch. I did a video on it. It could be a bad oring in the fuel pickup but most likely the selector valve.

@ShadetreeJetski 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MaIjoqotcLw.html That video will show you how to fix it.

@cobeygraves3588 2 года назад

@@ShadetreeJetski thank you so much. I’ll give it a try.

@ShadetreeJetski 2 года назад

@@cobeygraves3588 If that doesnt fix it then you have a bad oring on your fuel pickup tube. You really need to replace those as well, but they are not nearly as easy to change.

@ChristopherDominguez-ps3bh Год назад

I have a jet ski that’s cranking but no fuel pumping. Trie another sending unit but still won’t start. What else would cause it to not pump fuel?

@ShadetreeJetski Год назад

You have an air leak causing lack of pressure to build up in your tank. The fuel cap gasket may be cracked or split in two. Pressure test the fuel system to find the leak with soapy water and low air pressure 3psi, pumped into the return line. The selector valve orings also could be bad or the carbs have bad diaphragms.

@markJones38133 Год назад

My 97 Yamaha 2 stroke 1100cc keep leaking gas out into the ski. What could it be, I had new line put on it ?

@ShadetreeJetski Год назад

No way for me to know for sure without seeing it.

@DelongDavid94 3 месяца назад

I rebuilt the carbs and replaced the fuel selector valve.. I cannot get a vacuum to draw the fuel. The fuel keeps retreating back in to tank…

@DelongDavid94 3 месяца назад

To add… I purchased the ski from someone and it sat for 3 years with hardly any fuel in there… are there oring’s somewhere else besides the fuel selector valve that could be drawing air causing to not get a vacuum? I will have to check again to see if the fuel sending boot is good. I did not see any cracks

@atypicalhiker 3 месяца назад

The fuel cap gasket is likely cracked.

@DelongDavid94 3 месяца назад

@@atypicalhiker That was my next thought. I’ll try to change that out and report back

@atypicalhiker 3 месяца назад

@@DelongDavid94 check that one way valve also

@DelongDavid94 3 месяца назад

@@atypicalhiker okay so I replaced the gas cap and the one way valve is good.. I can’t get this thing to start on its own

@cobeygraves3588 2 года назад

Can I contact you? I just got one of these skis and I have one issue I can’t find info on but this is getting me closer.

@derekhenriksen7688 2 года назад

Hey man, i have the same ski, im not gettin fuel from the tank to any of the lines. It only starts if i spray starter fluid in the carb

@ShadetreeJetski 2 года назад

Your fuel selector may be bad or the rubber may be bad. There are also orings inside the fuel sending unit that could be bad

@derekhenriksen7688 2 года назад

Shadetree Jetski. Ok thanks man, is there anyway to test it to see if its bad

@ShadetreeJetski 2 года назад

@@derekhenriksen7688 I need to do a video on how to repair it. Look for it soon.

@derekhenriksen7688 2 года назад

Shadetree Jetski im pretty sure its the check on top of gas tank, i pushed air into tank and the fuel came out and went to all hoses so i ordered a new one.

@scottreed2946 2 года назад

@@derekhenriksen7688 Yoo Derek I got this same problem did you you ever get yours fixed

@Defunded 4 месяца назад

Would this cause a hard start issue? I have 2001 xl800, the first start of the day or after it sits for a few hours it’ll take like a very long time of cranking to start. Once it’s running I can turn it off and it’ll fire right back up until it sits. If I pull the plugs and spray starting fluid in it, itll start for a split second

@ShadetreeJetski 4 месяца назад

You could be losing fuel vacuum pressure from a cracked sending unit gasket or cracked fuel cap gasket. Likely though it is the carbs popoff pressure isnt correct.

@Mooseknuckle713 Год назад

You can remove that clamp with a pick

@alrosausa 11 месяцев назад

Do you know if the sender is 12V? I need to test my pumps to see if it's working.

@ShadetreeJetski 11 месяцев назад

Yes 12 volts.

@iof000 5 месяцев назад

Will this unit just pull straight up once all disconnected dose it have the room above

@ShadetreeJetski 5 месяцев назад

Yes

@NechesRiverChannel Год назад

what tool is used the crimp the hose clamp style on the fuel sending unit.

@ShadetreeJetski Год назад

Hog nose pliers

@aschoenfeld577 Год назад

Would this problem cause a bog down while pulling a tube out of the water

@ShadetreeJetski Год назад

I was unable to pull an empty tube with my 800. The pull point forces the tube to dig into the water as it is too low.

@jessejames7140 Год назад

I have a 1996 1100cc and it runs fine until full throttle soon as it hit like 50 or 55 it dies and then hard to start like it starving for gas. This only happened after it sat this winter. I used normal gas last year but put a stabilizer I. It and only one of my matching set runs this way. What should I look for

@ShadetreeJetski Год назад

If you used ethanol fuel you have yellow gunk in your carb. I have heard of electronics causing this as well cdi box or stator when they heat up.

@jessejames7140 Год назад

@ShadetreeJetski ok thanks I will start there tomorrow after I get this 2004 1200 yamaha suv. Getting one more for back up. Another question how come they can't hit 63mph like the othe 1200 and 1100cc is there a governor

@ShadetreeJetski Год назад

@jessejames7140 I talked to Mark at Erickson's machine and he said that 70mph is usually the top speed for most production skis because of the drag of the water. My 1998 gp1200 was much faster than the 2004 1200xlt. It was lighter and it had no powervalves. My gp1300r would do 71 on the lake.on smooth water. It was faster than I cared to go. As I understand it all of the stock electronics have rev limiters built into them. So I would say yes they are governed. The performance people, like Mark know how to squeeze more power out of these engines. I simply stay stock and dont know much about performance parts.

@jessejames7140 Год назад

@@ShadetreeJetski okay. Thank you very much for the response