No video :(

Yamaha YZF-R3 Motion Pro Throttle Mod | Sportbike Track Gear

Подписаться 141 тыс.

Просмотров 35 тыс.

50% 1

Yamaha YZF-R3 Motion Pro Throttle Mod
www.sportbiket...
We've got another throttle tube mod, this time for the R3 Project bike. We used the '06-'18 Motion Pro Nylon Throttle Tube for the Yamaha R6. We installed it on the Yamaha YZF-R3 to reduce throttle throw and get a quicker throttle turn. This was a pretty cheap and easy modification. Visually, it doesn't look like a huge difference, but you can definitely feel it when you turn the throttle. If you've done this mod on your own bike, let us know what you think. All modifications done to your bike are done at your own risk and we are not responsible for anything that may happen.
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
/ sportbiketrackgear
/ stg_moto
/ stg_moto
blog.sportbike...

Опубликовано:

18 сен 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@Andawg91 4 года назад

Thank you for the video Bryan. I did the r6 throttle tube on my r3 and the throttle cable was too tight to fit on the new r6 tube even with the adjustment maxed out topside. If not for this video I'd be lost especially since I couldn't get my old throttle tube back on. This video explained everything perfectly and made it look so easy. I had a harder time getting the fairings back on lol! I also used your video to install my woodcraft clip ons last year. You rock Bryan, please keep making these great videos!

@sportbiketrackgear 4 года назад

Happy to hear they were helpful and thank you for watching! - Van

@chrisriddiford6216 2 года назад

@@sportbiketrackgear Chris Riddiford Chris

@p0rt0b0y 4 года назад

For anyone wondering i installed the R6 throttle tube on a 2019 MT-03 (im in Australia) and it works perfectly. Very noticeable improvement in response. The cable was a total PITA to get on with the larger circumference , even with full slack. I ended up partially threading the screws on the throttle body when trying to remove them 😢 they are on very tight!

@sportbiketrackgear 4 года назад

Thanks for posting your experience. - Van

@Noizee76 4 года назад

i'm doing this mod on an MT07 and i have the same problem with cable. Basically with both cables in, the throttle grip just locks up and refused to return. I did not open up the screws at the throttle body. At the moment i'm running it single cable (pulling the throttle open). STG's video, 6 min = throttle body cable is removed. 10 min = throttle body cable is reinserted. Question : can the return cable (the cable that pushes the throttle open, the longer cable at the throttle tube)) be adjusted ? because my problem is here. IF i run one cable (the cable that pulls the throttle open) it works perfectly fine.

@chrisriddiford6216 2 года назад

@@sportbiketrackgear Facebook

@RTK171 5 лет назад

A GOOD TRICK IS TO START THE BIKE WHEN YOU INSTALL A TROTTLE TUBE. AND GO FROM LOCK TO LOCK IF THE REVS GO UP ITS BINDING OR NEEDS ADJUSTING TO KEEP THE REVS AT IDLE SPEED FROM GOING FROM SIDE TO SIDE

@RoughRaiders13 Год назад

Stop shouting at me. 🤣

@ryanmitchell4562 2 года назад

i love your videos they are very accurate and true, I also have the same year model, so everything i get the pleasure of learning from you i really appreciate it, and what yall do for the rest of us that want to do things the right way

@sportbiketrackgear 2 года назад

Thank you for watching and for the kind words. - Van

@throwzpu 5 лет назад

did throttle mod to my k6 gsxr 1000. you had to double grab to get to WOT so i threw on 03 R1 throttle tube($10 ebay) with zip tie mod to drastically reduce the throw on my throttle. works so well now but had to relearn to rev match the bike cuz i would over rev now on the down shifts. have to micro rev to catch it right.

@sportbiketrackgear 5 лет назад

I have never done the mod with the zip tie. It is very important your throttle is smooth and does stick. I would recommend installing a new quick turn throttle instead of the zip tie deal. - Van

@scorpion251970 5 лет назад

I did this last year. Improves response/throw.

@petercompitello228 3 года назад

Appreciate the real way to install

@sportbiketrackgear 3 года назад

No problem, happy to help out. - Van

@infernalkiwi Год назад

2022 MT-03 all i had to do was take the three screws of the housing, and pop the Tube in. No adjustment, worked like a dream. No sense in greasing the bars either if the bike is within the last 2 years or so.

@sportbiketrackgear Год назад

Thanks for sharing your feedback. - Van

@DamnitsAdriel 4 года назад

I was thinking to buy a domino throttle and also the switches, than this video showed up.. Thanks alot..

@sportbiketrackgear 4 года назад

No worries, thanks for watching! - Van

@08lietz 3 месяца назад

Your videos are Fantastic!! Quick question, what can be done if you have the slack adjuster backed off all the way with no more room? Is there another place to adjust the slack or do you have to re-cable it?

@sportbiketrackgear 3 месяца назад

Thanks for watching. It has been a minute since we shot this or since I have handled the OEM R3 throttle. I am pretty sure we show all the available adjustment in this video. From your comment it is hard to tell if you are having trouble getting this installed or if you are not able to get it adjust after installing. One thing I can tell you is it is important the work is done correctly and the throttle does not bind. - Van

@deltalight584 4 года назад

Thank you for your insight as always. However, it would be great if the cameraman could more clearly capture what Brian is doing with his hands rather than being blocked by them.

@sportbiketrackgear 4 года назад

You are welcome. Important to remember we are a bike shop and not a Hollywood studio. End of the day we can only invest so much time on each video as I have a ton of other stuff to do. Comparing us to Revzilla at STG the owner is the dude doing the 1000's of install videos that has a professional mechanical background that goes back over 30 years. - Van

@jamesminnock7780 3 года назад

Hi , got the oem r6 tube for my r3 , but when I put cover back on tube sticks.doesnt return back

@sportbiketrackgear 3 года назад

You need to double check your throttle cable adjustment. Follow the steps we have in this video and you should get the same result. - Van

@ianwolfe7226 Год назад

Hiya mate i am thinking about getting a yamaha yzf R3,i amn a big fan of your shows

@sportbiketrackgear Год назад

The R3 is a great bike. Thank you for watching! - Van

@socomsmith3241 4 года назад

Nice tip with the electrical tape

@sportbiketrackgear 4 года назад

No worries, happy to share it. - Van

@riderbuu1 3 года назад

great video

@sportbiketrackgear 3 года назад

Thank you for watching! - Van

@joseph-ow1hf 4 года назад

From what I understand, you can simply adjust the cable tension to take out the 'dead spot', no need to replace the throttle tube. Dunno if that info is legit, but it seemed to make sense.

@michelhadid 4 года назад

That Will only eliminate the slack, however, the travel Will be the same once It starts pulling the cable until WOT, this throttle tube Is phisically bigger so the actual travel is way shorter, the travel adjustment does make It Easy Better to ride, tho

@sportbiketrackgear 4 года назад

You can adjust the cable to remove the free play. Replacing the throttle tube allows you to get to 100% throttle without less rotation of the throttle. This mod helps a bit but is not as effective as installing a full quick turn throttle kit. - Van

@jasonglowacki5995 4 года назад

Just finished doing this 2019 R3, and the difference is noticeable. I was able to slip mine on with out removing the cable at the throttle body. The bike idles fine while sweeping the bars, but I have all the free play out of the cable at the throttle. Should this be a concern? Is there way to add more slack to that cable? Thanks for the great videos!

@sportbiketrackgear 4 года назад

As long as the throttle has a good strong return and the rpm's do not pick up when you sweep the bars back and forth you are good to go. Thanks for watching and sharing your feedback. - Van

@jasonglowacki5995 4 года назад

Awesome! thanks for the response and great videos! As far as the mod, works great still with no issues. And is noticeably shorter. Recommend.

@molarmassz Год назад

I have the exact same bike. May I know if in the video your fork is lowered? I've seen a couple of R3's with different placement of the clipon bars and mine looks like yours so I was wondering whether it was stock or whether it has been altered

@sportbiketrackgear Год назад

We no longer have this bike at the shop and ours was turned into a race bike so the settings used would not necessarily work for you. - Van

@xTahoe 5 лет назад

Would this work on a 2019 model year?

@sportbiketrackgear 5 лет назад

I am not 100% certain but I believe it will still work. - Van

@egglybagelface 4 года назад

I just finished this on my 2019 R3 and it works great so far.

@sungshin8511 4 года назад

@@egglybagelface Still good?

@egglybagelface 4 года назад

@@sungshin8511 Yea it's great, one of my favorite mods I've done.

@sungshin8511 4 года назад

@@egglybagelface Cool. about to get it done. Thanks!

@your_highn3zzfabito398 2 года назад

hi van . i just watched your videos. ive been thingkin to get the R6 trottle tube. but not sure which year of the R6 would i get. my R3 is 2015. pls and thank. stay safe

@sportbiketrackgear 2 года назад

www.sportbiketrackgear.com/motion-pro-yamaha-yzf-r6-06-18-nylon-throttle-sleeve/

@snikeone1562 4 года назад

Si yo quiero poner alreves el mando decencendido , me afectara el acelerador ? Quiero poner por debajo el manillar pero los cables rozan en las tolvas .

@gearmeout4666 4 года назад

Will my oem grip fit on this throttle tube? I just ordered it off your site.

@sportbiketrackgear 4 года назад

You should be able to reuse the grip as long as you can get it off without damage. The OEM stuff is usually glued on and hard to save. Best to order new ones IMO. - Van

@conradoospina9691 5 лет назад

eselente programa grasias de colombia

@RTK171 5 лет назад

The R6 is 1/6 of a turn the oem is 1/4 but I'm trying to find a 1/8 trottle tube. Not easy... Also does the R6 throttle cables fit in the R3 as I'm considering fitting a whole R6 throttle assembly on my R3 but not sure about the R6 cable length??, Also is the R6 throttle tube a quicker turn then the motionpro rev2 50mm ring or the progressive orange ring.

@sportbiketrackgear 5 лет назад

I would suggest going with the Motion Pro REV2 kit. This is what we have on all three of our bikes and I believe this is the absolute be option out there currently. With all the cams in the kit you will be able to get the throttle right where you want it. - Van

@justmeandmy 3 года назад

What if the cable seems too long even with the top fine adjuster fully absorbing all the slack it can? Its like the cable is too long. (not too short like you had)

@sportbiketrackgear 3 года назад

I would have to see this in person to be helpful. My only experience with this is what you see here in this video. - Van

@justmeandmy 3 года назад

@@sportbiketrackgear yeah it seems there is no adjustment on the throttle body like on some other bikes . Mine was an Amazon heated grips, it was ok for a spring road trip. but I'm probably going to rip and replace with the r6 tube as this bike is getting repurposed for track only use

@edgeofnowhere0 3 года назад

"I like to get a real thin layer of grease in there" - What grease are you using inside the throttle tube? I searched online and everyone says to not use any, or in rarer cases use WD40 or use graphite.

@sportbiketrackgear 3 года назад

I use a thin layer of common universal grease under all of the throttle tubes I install. Have been doing this for years. My Son is racing the bikes I build in MotoAmerica. - Van

@edgeofnowhere0 3 года назад

@@sportbiketrackgear It doesn't attract dirt, especially when road riding?

@rafaelmarquez3291 5 лет назад

Hey I have a question I just buy a bike and try to change my handle grips and I found out the last owner glue them with some hard glue what can I do to remove them thanks in advance.

@sportbiketrackgear 5 лет назад

Man that is a bummer for sure. All you can do is try to chip or sand it off, this may be hard to do on the plastic throttle tube. You may need to purchase a new throttle tube to save time. - Van

@jaredmoulden8763 4 года назад

my throttle tube is sticking and not going back to original place when coming off accelerator any fix to this

@jaredmoulden8763 4 года назад

in the end had to get a grinder and cut off the bolt

@sportbiketrackgear 4 года назад

If you have the exact same bike and installed this tube you need to double check your work. Pay close attention to your throttle cable adjustment. - Van

@igaclan619 5 лет назад

I want to install lever guard to my stock handle bar but got the anti vibrate rod , so if i remove the rod and install my lever guard , whats the effect and what i need to do to to make it normal again ?

@sportbiketrackgear 5 лет назад

The Driven Lever Guard kits can typically be installed with the OEM bars and insert. Take a look at this video we did with a 2017 Yamaha R6: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sUfCjApIAe4.html - Brian Van

@parthivbomma6570 5 лет назад

Installed the throttle tube, but I am experiencing lot of vibrations past 5k rpm, is there any solution?

@sportbiketrackgear 5 лет назад

Replacing the throttle tube should not have anything to do with vibrations. This is most likely a new issue or something you did not notice previous to installing the throttle tube. Make sure you double check all of your work to ensure you have not left something loose. - Van

@JoseParedes-yv3ni 2 года назад

Would this throttle tube specifically work on a 2021 r3?

@sportbiketrackgear 2 года назад

I would expect but could not say 100% as this was done on a 2015. - Van

@kawi704racing 4 года назад

Hey honestly are the K-Tech fork cartridges worth the $900 price tag?.......all the best.

@sportbiketrackgear 4 года назад

100% worth the price. So much better than the OEM. - Van

@kawi704racing 4 года назад

Yeah i figured. I like K-Tech, but for my 19 zx-6r they are asking $1300 - $2400 it's alot. I takes plenty of money to go fast, no secret....anyway love your videos...all the best, stay healthy.

@xxShadowWolf8019xx 5 лет назад

If I get the one with the grip attached to the throttle tube it’ll still be the same thing right?

@sportbiketrackgear 5 лет назад

As long as the application is the same it should be good to go. - Van

@Uthred21 5 лет назад

Hello StG I’ve been following you since I decided to buy my first bike which is R3 and I made some mods on it, I change the stock exhaust into yoshimura full system but since the changes made I feel my bike bacame slower , it throws more back fire than before it run lean sometimes when I riding it there re times that you’re going to revs the throttle but only fart, unless you will revs again to gain power I will glad if you can help me to solve this I ask some mechanic they told that if I decided to full exhaust I will be needed power commander 5 right now I remove the full exhaust and put back my stock exhaust full system I’m thinking what if if I just change cannister only and not the stock pipe below? Can you help me? #STG

@sportbiketrackgear 5 лет назад

We installed full systems on our R3 without any fuel controllers and felt the performance was improved over stock. If you feel the performance went backwards you may have another issue with the bike. Installing a slip on will keep the performance and sound pretty close to stock. With a full system you will need to either flash the ecu or install a fuel controller as well as remove the PAIR system to get the maximum benefit. - Van

@mauroblog2526 5 лет назад

Como hago para pedir ese mando de acelerador?

@Cragofitness45 5 лет назад

What grips and lever guards are you using? Will they help with vibration?

@sportbiketrackgear 5 лет назад

The R3 has Woodcraft clip ons with Motion Pro Grips (they came with the Rev2 throttle kit) and a Driven trackday lever guard on the brake side. When I rode the R3 I did not feel any excessive vibrations with our set up and Max has never complained. What are you running on your bike? - Van

@Cragofitness45 5 лет назад

Sportbike Track Gear I have 2015 Zx10r I have stock grips, bar ends and clip-ones. I have the rev2 throttle kit.

@spengg_shell 3 года назад

Does the r6 throttle work on the mt03?

@sportbiketrackgear 3 года назад

Pretty sure they are the same but I can not say for sure. - Van

@carlcordon3594 4 года назад

Hi there . I have a 2015 R3 and want to switch the throttle. Does it matter what year of the r6 throttle I put on

@sportbiketrackgear 4 года назад

Use the one in this link: www.sportbiketrackgear.com/motion-pro-yamaha-yzf-r6-06-18-nylon-throttle-sleeve/

@quangqautoservicecenter5075 5 лет назад

I feel no difference.

@sportbiketrackgear 5 лет назад

This mod helps and makes it a little quicker than stock. If you do not feel this is enough then you need to replace the OEM throttle assy with a Motion Pro REV 2 quick turn throttle. We did this on our R3 after Max rode the bike once or twice with the throttle tube mod. He said he noticed a difference with the throttle tube mod, but the difference with the REV 2 was much better and more along the lines of what he wanted. We used the RR Cam in the throttle. Here is a link to this on our site, we have a full video install if you want to check that out on this listing. www.sportbiketrackgear.com/motion-pro-rev2-throttle-kit-yamaha-yzf-r3-15-17/