Yamaha Zuma / BWS 50 CVT Removal (varitors, belt, rollers, clutch) | Mitch's Scooter Stuff

Подписаться 110 тыс.

Просмотров 55 тыс.

50% 1

In this video I show you how to remove CVT parts - the clutch, variators, drive belt and rollers on Yamaha Zuma / BWS 50cc scooter.
Tools I used in this video:
Ratchet 3/8 drive - amzn.to/2hhmnUs
3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl
10mm socket 3/8 drive - amzn.to/2xGuLSF
17mm socket 3/8 socket - amzn.to/2EMT6LO
5mm allen 3/8 drive - amzn.to/2ofCuCg
Phillips no.2 screwdriver - amzn.to/2fgdZDL
Variator / Clutch holder tool - amzn.to/2ZuYJEA
Knife / razor blade - amzn.to/2SZIUUd
SHOP ALL SCOOTER TOOLS AND GEAR I USE:
bit.ly/MitchsScooterStuffSHOP
Want more free Scooter Tip / Tutorial videos - Help support this channel! Paypal donation: bit.ly/PayPalMitchsScooterStuff
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
*******************************************************
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other RU-vid channel - bit.ly/2g4i5d5
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Yamaha Zuma / BWS 50 CVT Removal (varitors, belt, rollers, clutch) | Mitch's Scooter Stuff
• Yamaha Zuma / BWS 50 C...
Mitch's Scooter Stuff
/ mitchsscooterstuff
#YamahaZuma50 #mitchsscooterstuff #yamahabws

Авто/Мото

Опубликовано:

1 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@MitchsScooterStuff 5 лет назад

SHOP ALL SCOOTER TOOLS AND GEAR I USE: bit.ly/MitchsScooterStuffSHOP TOOLS I USED IN THIS VIDEO: Ratchet 3/8 drive - amzn.to/2hhmnUs 3" / 6” extension set 3/8 drive - amzn.to/2h7ypMl 10mm socket 3/8 drive - amzn.to/2xGuLSF 17mm socket 3/8 socket - amzn.to/2EMT6LO 5mm allen 3/8 drive - amzn.to/2ofCuCg Phillips #2 screwdriver - amzn.to/2fgdZDL Variator / Clutch holder tool - amzn.to/2ZuYJEA Knife / razor blade - amzn.to/2SZIUUd

@justineli3229 2 года назад

I dont mean to be so off topic but does any of you know of a method to log back into an Instagram account? I somehow forgot my password. I love any assistance you can give me!

@tylermartin799 2 года назад

@Justin Eli instablaster :)

@justineli3229 2 года назад

@Tyler Martin Thanks so much for your reply. I found the site thru google and im trying it out atm. Looks like it's gonna take quite some time so I will get back to you later with my results.

@justineli3229 2 года назад

@Tyler Martin it worked and I now got access to my account again. I'm so happy! Thanks so much, you saved my ass :D

@tylermartin799 2 года назад

@Justin Eli happy to help :)

@bmwgary 2 месяца назад

Clear video with all you need to know. Thank you 👍 I’ll have to rig something without having the variator holder tool

@TheSonofseventhson 4 года назад

Your channel is by far one of the most detailed channel about bike reapairment if not the most detalied one, the only thing sad it's thats only about scooters (i got a honda helix 150 deluxe, 1985, but im bike mechanic, so i got other 4 bikes) Greetings from argentina!

@brentsouder8173 4 года назад

I learned tons from your GoPro vids. Now in the scooter world too!!! Replaced my clutch and tweaked my variator a bit too with help from your expertise.

@brentbaker954 2 года назад

Awesome how to, thank you! Great videos btw. No talking makes these very relaxing. Also extremely well written instructions, the detailed shots are spot on! Keep up the good work!

@MitchsScooterStuff Год назад

Glad you liked it!

@tommywanders Год назад

Excellent, thank you this will be very helpful. I’ve owned mine for 10 years and just hit 10,000. I’m having a buzzing/chatter from the CVT, so this will come in handy figuring out how to fix it.

@Freebyrd1991 Год назад

YOU ARE AN AMAZING CONTENT CREATOR. This video is absolutely put together perfectly of something being taken apart perfectly. haha really exactly what I was looking for just so I know exactly what I am encountering before I do this same thing 10 thumbs up and new subscriber here!

@Kirby444 4 года назад

I watched this video about a week ago as I attempted to remove the clutch from my 2002 50cc Zuma. Just got my spanner wrench in the mail today, and re-watched this evening so I would be certain what to do. Thank you for posting this, it is (so far) the ONLY video on RU-vid that actually demonstrates how to do this for an old Zuma! I wondered as I watched both times: "How come he never says anything?" And this evening I noticed your fingers counting the bolts in the crankcase as though you were using ASL. I figured, "Lots of people probably count that way." Still, it seemed odd that you never spoke in the video and that you counted in this somewhat unusual manner. But hey! I get it now!!! That year of junior college ASL that I took sometimes pays off. Thank you again for posting this! It needs no spoken words anyway, not the way you filmed it. Well done!

@Kirby444 4 года назад

Okay, Mitch, now we have a problem: I followed your visual instructions here for removal of the clutch: you take a socket wrench, brace the spanner against the ground, give a few solid downward pushes, and pop! It comes loose! The thing is, I am not at all certain you had not removed this same nut earlier, because I just tried this with a regular wrench with my spanner against the ground and despite heating the nut with a blowtorch before applying my greatest strength against the nut, the wrench slipped off the nut and I ended up gouging two of the fingers of my right hand. Once the bleeding stops, I will try to remove the nut again, but I have to ask: how did you get this nut off the FIRST time you did it? It cannot have been as direct or easy as you show in this video. Did you heat it first? Did you use different tools? Power tools? How? Please explain! Because without that information, the video is misleading at best and people like me get injured at worst. Thanks!

@Kirby444 4 года назад

So I got a 17mm shallow socket, and between that and a breaker bat I got that nut off! Man, that was hard! Thanks anyway! Enjoy Hawaii!

@josephvargas2989 4 года назад

Hey Mitch. This video was supper helpful. I’m installing some new OEM parts in my cvt on my 2005 yamaha zuma. New cutch and springs, new belt and new variator and roller weights. My question is: do I need to lubricate any of these new parts with moly grease or any other lubricant or do I just install them all dry? Thanks!

@pistolpboston3475 4 года назад

How u doing thanks for the videos 💯 wanted to ask u a question about a prebug zuma I have a 70cc kit Athena stage6 manifold 28 carburetor OKO had it sitting for a few months and now it wont turn on I put a new spark plug ..new 2 stroke oil ..new gas and nothing gas is going to the carburetor and it has a lil spark ??

@johndasilva66 4 года назад

My Yamaha zuma 50 no longer reaches top speed of 36 and 40 downhill. It only tops out at 29 will this repair help?

@benhossack2165 4 года назад

How heavy are stock rollers on a bws 50

@johndasilva66 4 года назад

My Yamaha zuma 50 no longer reaches top speed which is 36 and 40 downhill. Would this repair help?

@FroGGi1989 4 года назад

Mitch help! I have a Yamaha Zuma 50 (2004) and I'm trying to remove the starter motor to test it cause I believe its very old and may need replacement since the electric start is not working, but the screws to remove it are on the inside and I cant get to the bottom one, not sure how to do it without taking apart part of the frame maybe? :S I'm new to mechanics and scooter stuff but I'm learning a lot thanks to your videos and others on youtube :)

@winnerwinds6509 4 года назад

Could you reuse the gasket?

@rtorbert0406 4 года назад

What is the name and where can I purchase that lift from?

@jmracer86 Год назад

I have had a vibration for the last 100km and finally I just lost drive on my 2003 yamaha bws. It's got 25,000km on it. I have not had the chance to open it up yet. What's the most common part to fail on these things. The belt? or did my CVT go to shits maybe. I was doing a lot of brake stands on it and it started to wheel hop which probably wasnt the smartest thing for it.

@JonahAberle 4 года назад

Thank you!!!

@b4rt0sh70 5 лет назад

Piaggio typhoon 50 2012 ml OIL ENGINE?

@lonnieullom5883 3 года назад

How to put back together a 2003 50cc fly wheel and rollers

@williearkoncel9606 4 года назад

Now i know... thank you 😊😊😊👍🏼👍🏼👍🏼

@oldschoolgoblin Год назад

People named mitch are 100% more likely to enjoy scooters

@zairataborda5 Год назад

Dns conseguir repuestos de esa moto ?????

@josephmorin1098 2 года назад

My clutch I didn’t have to squeeze it to get it off it just slides off and on. Is that a problem I have a Zuma 09 50

@MitchsScooterStuff 2 года назад

Slide on and off on the rear shaft you mean?

@jimsmanual7723 5 лет назад

hi mitch. i would just like ask what camera are you using? thanks.

@MitchsScooterStuff 5 лет назад

Hi Jim, I use sony a6500 with 18-105mm f/4 and 10-18mm f/4

@jimsmanual7723 5 лет назад

tnx for the reply mitch!

@redbo9210 5 лет назад

you defently should buy a piaggio zip 50cc you gotta love it.

@MitchsScooterStuff 5 лет назад

that's one of my dream scooter, problem is Piaggio do not carry zip to USA :( They do with Fly and Typhoon.... maybe I could try to import one from Europe somehow...can you help 😄👍🏼😉

@redbo9210 5 лет назад

Mitch's Scooter Stuff ofcourse i can help i restored mine last summer you can do everything you want with it, i can send you some pictures of mine if you share youre email. and yes i can help you get one