Тёмный

You absolutely must know THE laserpecker 4 ENGRAVES ALL METALS - Dual Laser 

Daniele Tartaglia
Подписаться 1,1 млн
Просмотров 51 тыс.
50% 1

🎁🎁🎁👇👇👇👇🎁🎁🎁
This is the Link LaserPecker 4:
🛒 shrsl.com/45ly8
👉😀 Early Bird: Huge savings up to $500 on orders before July 31, 2023
Use this code at checkout to get an additional $50 off your LaserPecker 4 order
🎁 Use this Coupon: DT50L4
Validity period of the coupon code : 2023.7.19 - 2023.8.19
EXTRA:
Microscope shown in the video: www.banggood.com/custlink/DK3...
👉 TELEGRAM: bit.ly/2V9CWVY
👉 ISCRIVITI A QUESTO CANALE !! bit.ly/2Kn6yco
👉 L' ALTRO CANALE DA 1.000.000 di iscritti !! bit.ly/2Kn6yco
👉 INSTAGRAM: bit.ly/3kPlAon
👉 FACEBOOK PAGE: goo.gl/s6Utqw
👉 TIKTOK: bit.ly/3oPSFIj (Qua ti fai due risate) 😂
〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️
TUTTA L' ATTREZZATURA CHE USO NEL MIO LABORATORIO E CHE VEDETE NEI MIEI VIDEO
👉 La mia attrezzatura professionale: amzn.to/34LvVM1
👉 I migliori attrezzi per la saldatura a stagno: amzn.to/33RlBmB
👉 I miei attrezzi da lavoro suggeriti: amzn.to/3711O6d
〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️
#laserpecker #laserengraving #lasercutting

Наука

Опубликовано:

 

19 июл 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 49   
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
🎁🎁🎁👇👇👇👇🎁🎁🎁 This is the Link LaserPecker 4: 🛒 shrsl.com/45ly8 👉😀 Early Bird: Huge savings up to $500 on orders before July 31, 2023 Use this code at checkout to get an additional $50 off your LaserPecker 4 order 🎁 Use this Coupon: DT50L4 Validity period of the coupon code : 2023.7.19 - 2023.8.19
@electronic7979
@electronic7979 11 месяцев назад
Excellent product
@maggus4720
@maggus4720 11 месяцев назад
can you share your settings for every material and how many passed you‘d done to get the results from the video please :)
@ThaRoxNthaHse
@ThaRoxNthaHse 6 месяцев назад
Yes plz. I can’t get good engravings for nuttin with my new lp4😂
@ASassyP
@ASassyP 9 месяцев назад
How do you know what laser to use for what material? I just got an LP4 and have never had a laser engraver before. I have no clue what each laser does and when to use it for what material. Do you have any good resources of where I can learn this?
@mahmoud-69
@mahmoud-69 11 месяцев назад
Thank you for all your beautiful lessons. I wish I had your tools. In my country, these tools are expensive. I hope I can get them one day.❤
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
I'm sorry, these are expensive products and many times I feel uncomfortable showing them to my subscribers. I hope one day you can have these tools. Maybe in a few years the prices will go down a lot.
@tony001212
@tony001212 11 месяцев назад
no that expensive if you consider the amount of money you can earn with it, I am sure there are a lot of people interested in desings in their celphones and other things, this thing I am sure pay for itself in a few months.
@madkvideo
@madkvideo 11 месяцев назад
Beautiful machine!
@DasIllu
@DasIllu 11 месяцев назад
Laserpecker sounds like the title of an 80's SciFi adult movie 😀
@chrissewell1608
@chrissewell1608 11 месяцев назад
You tell um', Tazzer Face! 😂
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
😂😂
@CraigHollabaugh
@CraigHollabaugh 11 месяцев назад
Please try engraving a SMT circuit board. Thanks for the video.
@chrisprenn
@chrisprenn 4 месяца назад
Could one get a deeper engraving on steel by repeating the process several times on the same spot?
@poker4846
@poker4846 5 месяцев назад
Hello is possible you can give us a tutorial on which settings to use in every materials to get the best result because i honestly dont understand how to use property the machine
@Silvy4Peace2Love
@Silvy4Peace2Love 10 месяцев назад
Nice video! Did you tried silicone watch bands?
@pheenix42
@pheenix42 8 месяцев назад
Please do not forget to find a way of dealing with the smoke generated when you engrave wood or paper.
@krz4t8
@krz4t8 4 месяца назад
Nice video! Will this work for titanium?
@0JuP0
@0JuP0 7 месяцев назад
How should o choose material and where can I get the % ref?
@zunigatactical
@zunigatactical 11 месяцев назад
Please, test transparent acrylic and transparent polycarbonate cut. I have a sculpfun s9, but dont cut those materials, and dont engrave in aluminium, copper, galvanized steel, and transparent surfaces.
@wenigerisstmehr126
@wenigerisstmehr126 9 месяцев назад
I also have problems with some materials like copper. I am disappointed to be honest. I couldn't cut 15 mm plywood with one pass. Even not with two passes. Also wood got burnt. It takes far too long to cut without burning the wood actually. I don't know whether I am expecting too much but with this high price it should do better.
@zunigatactical
@zunigatactical 9 месяцев назад
@@wenigerisstmehr126 15mm is too much for those machines. Maybe for your case, a CNC milling machine is better. Sculpfun Just cut 3mm plywood in one pass. Most diode lasers can do this. Fiber lasers is better to engrave some materials.
@wenigerisstmehr126
@wenigerisstmehr126 9 месяцев назад
Sorry I meant 1.5 mm and that should be possible easily for this machine.
@wenigerisstmehr126
@wenigerisstmehr126 9 месяцев назад
@@zunigatactical I also have 4 mm pine plywood and for cutting one earring not that big it would need 1 hour with several passes. We bought this machine for commercial use and are really disappointed...
@zunigatactical
@zunigatactical 9 месяцев назад
@@wenigerisstmehr126 what software you use for your machine? I still use lightburn in my sculpfun. My settings for 1pass cut: 100mms@90% Power. Do you use air Assist? Check The lens, if not dirty. Fumes make dirt on lens, make difficult way to pass the light for them.
@silvanocollu6842
@silvanocollu6842 11 месяцев назад
in pratica si possono fare anche circuiti stampati ,con le basette in rame
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
Si, dal momento che ha una risoluzione impressionante. Il problema è che non ha sufficiente forza per tagliare il rame ma con la tecnica del fotoresit, si possono fare circuiti stampati.
@silvanocollu6842
@silvanocollu6842 11 месяцев назад
@@DanieleTartaglia 🤣 in teoria si dovrebbero risparmiare i primi passaggi di incisione ,se ho capito bene ,visto che lo puo fare direttamente il laser. e poi procedere normalmente . va bo era solo un modo per avere un ulteriore ed alternativo utilizzo .oltre a tutto quello che fa .tutto qua ..se dovrei acquistarla solo per fare circuiti stampati , sarebbe come comprare un cannone per eliminare le zanzare , grazie in ogni caso
@massimoc2867
@massimoc2867 11 месяцев назад
Ciao Daniele bel video e bella l'idea di guardare i dettagli con microscopio elettronico e sembra davvero molto preciso, tu che sicuramente l'hai provato bene è effettivamente preciso come si vede? Sul taglio senza aiuto dell'ar come se la cava soprattutto su legno,in fine una curiosità cosa significa quando hai inciso la piastrina 4K ? Ha la risoluzione pari al 4 k o cosa? Grazie per le risposte e complimenti ancora per il video il mi piace non può mancare ciao Massimo C.
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
Grazie massimo. Ti rispondo subito: Si, è veramente preciso e ho utilizzato il microscopio proprio per mostrare come realmente incide. La risoluzione 4K non è altro che una densità di punti che formano il disegno. A 4K fai incisioni molto piccole, per esempio su anelli ecc. Hai presente nei classici incisori laser l' intervallo di linea? Più sarà basso il valore e minore sarà lo spazio dell' incisione tra una linea e l' altra. La risoluzione 4K forma la figura con molti piu punti ma che userai solo su incisione di piccole dimensioni. Considera che nel legno è poco rilevante e ti allunga drasticamente i tempi di lavoro. Per il taglio, non potrai fare grandi cose perchè il laser stesso non lavora in modo perpendicolare e i tagli estreni saranno angolati. Però potrai tagliare fino a 5 mm delle piccole targhette, ma non c'è un kit air assist perché la potenza è minima.
@massimoc2867
@massimoc2867 11 месяцев назад
@@DanieleTartaglia perfetto Daniele davvero gentile e disponibile grazie per la tua risposta molto dettagliata tecnica e precisa,grazie davvero apprezzo moltissimo,al prossimo video ciao Daniele
@ivanvaldez5341
@ivanvaldez5341 11 месяцев назад
Quiero una!!!😅
@macroby
@macroby 11 месяцев назад
Yo también 😊
@Massimo68ac
@Massimo68ac 11 месяцев назад
👍👍👍👍👍👍
@Greenishprint
@Greenishprint 7 месяцев назад
Must have. But I'm too scared to even check the price on this thing
@antonioromeo2451
@antonioromeo2451 9 месяцев назад
mi piacerebbe vedere come si comporta con il titanio qualcuno ha provato ?
@chrissewell1608
@chrissewell1608 11 месяцев назад
How deep can it engrave?
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
5-6 mm
@chrissewell1608
@chrissewell1608 11 месяцев назад
Deep enough to apparently cut through materials! 👍👍
@A_Stereotypical_Heretic
@A_Stereotypical_Heretic 11 месяцев назад
Laser pecker? 😂 Thats what she...didnt say...😔
@DanieleTartaglia
@DanieleTartaglia 11 месяцев назад
😂
@tocantinstvoficial
@tocantinstvoficial 5 месяцев назад
Comprei e me arrependi! Existe um travamento na hora de configurar os acessórios que ninguém conseguiu decifrar e não tem vídeo falando sobre! Joguei meu dinheiro no lixo! A maquina é boa mas a assistência é péssima!
@kelleys81
@kelleys81 7 месяцев назад
I feel like you are using marketing fuckery in using “marking” interchangeably with “engraving”.
@butterflyj685
@butterflyj685 6 месяцев назад
🤣🤣🤣
@patriot9146
@patriot9146 3 месяца назад
Купила я себе такой лазер. Был очень сильно разочарован. Это очень, очень, очень медленный лазер. Если вы хотите сделать что-то в большом количестве. Вы просто устанете ждать, по металлу он очень слабый и так же медленный. Гравировка 15 на 15 см на деревево у вас займёт 30 минут. Вы не смотрите на видео, они там его ускоряют эти блогеры, чтобы продать вам эту бесполезную вещь. Это очень дорогая игрушка.
Далее
220 volts ⚡️
00:16
Просмотров 571 тыс.
НЕ ПОКУПАЙТЕ ЭТО!
00:29
Просмотров 26 тыс.
HOW to make CNC LASER engraver DIY from DVD drive
19:57
xTool F1 (The Rocket) 144Km/h VS Laserpecker 4
19:24
Просмотров 40 тыс.
Galvo Laser Showdown xTool F1 VS Laser Pecker 4
9:55
Amazing technology LaserPecker LP4!
13:00
Просмотров 26 тыс.
25 Products That Let Me Quit My Full-Time Job
8:29