You Asked, We Compare: CZ P-07 vs CZ P-09 

Thank you.

@Buttbanging Trannyliberal Yes for a current time handgun of course. I haded in last time lots of different polymere handguns in my hands. The only one I really was fascinated was the P09. I have tried the P10 but it have much more clearance between grip and slide. Also I must say the P09 I have tested haded a minimal and I mean really a minimal clearance between slide and grip. The one I own have absolutly no clearance between slide and grip. The trigger is much better then from Glock and the manufacturing quality is very high for the price you pay for the P09. For me it also was important to have a poly gun with a outside hammer. So I can load and charge the gun uncharge the hammer and the gun is ready to shoot double action or charging the hammer again for single action. Dont understand me wrong I really have tried Glock but the CZ have convinced me. Otherwise I would not have buyed me a polymere handgun. High Cap is also a reason to recommend it.

I had a new p10c but sold it last month and I liked it,I got a new 09 tactical today and I absolutely love it. All my other pistols are compact pistols and this is the perfect full size 9mm hammer fired pistol and the s.a pull is 4lbs and I love it. I may look for a shorter stroke trigger but the pull is already great and smooth.

Agreed P10 polymer felt a bit too cheap to be real when compared to other competitors I just hope they follow through with rmr mount slides

I thought the french police had Sig Sauers as standard, are you able to pick your own service weapon?

@@oscarlax5956 I don't know how it works in other countries but when my father was a cop after a few years on the force you can choose a different firearm from an approved list (or go through a tedious approval process). Most cops don't because there usually aren't extra parts/mags, they have to purchase the gun they want to use as opposed to being issued one from the department, or they don't want to go through the hassle of the process. I think his department was using the Smith and Wesson Model 5906 (or the one that comes in. 40) but they allowed him to use a Beretta 92 (he was more familiar with it from his military days) after a few years. It's still more common to see officers with different holsters than pistols though.

@@oscarlax5956 I'm in police municipale not nationale. Nationale with Sig

@@nekto8810 great choice, I have the P-07 and P-09 (as a civilian) and they are both fantastic guns

Jai les 2, le 7 est super. Le 9 que des emmerdent avec . suis que jaime le mieux est le phantom !

Where do you find your extra magazines? I have looked online and yes, it is 3 years later, but I can't find any in stock. Do you know if other models of CZ or other brands have compatible magazines with the P07?

Me too😍

Me too, better than advertised lol

For sure, I've had 100% reliability so far! But I fell in love with mine when I got my first look at it. I just think they're beautiful guns.

Did you carry a revolver before? If you did, which one was it?

i carry mine often!! its a really good shooter

@@JacksonWalter735 I didn't carry it, but I did have a Tex 22, about ten years ago.

Thank you.

@@HammerStriker hi, which has more recoil between the cz P07 and P09

lucky im having a helluva time finding one in my area lol im looking to replace my canik tp9 combat elite to carry a p07

Thank you.

Thank you.

Why sold Glocks? Thanks

I really never understood the love affair with glock.. i remember buying a g17 and a cz75b at the same time and being so dissapointed with the accuracy and controllability of the glock compared to the CZ.. then i tried the polymer cz's and was equally impressed. Theyre about as fine a handgun as ive ever owned and im including a few pretty pricey guns in that list

@@doubleugly1594 Well, as much as I like my CZ, I did keep my G43 w/ +2 mags for summer carry and it is amazingly accurate for a 3.1 barrel. At 5-7 yds, it gets an inch and a half group!!

Thank you.

Same here! But they're quite hard to find where i live..

How much was the milling and who did it for ya?

Thinking about getting the arex cause it already has the milled slide

@@TheDkb427 i did it from Jagerwerks. The mill was 125 for a holosun 120 for the cerakote i did.(multi color)

@@kylebar724 I'm so torn. IDK if I should get the arex zero 1 tc in grey or the tactical p07 in grey. I like them both equally by the 07 isn't optic ready. Ugh decisions decisions

@@TheDkb427 i guess it starts with what do you use them for? Carry? Just range shooting?. I personally don't know much about Arex

Thank you.

I already have a P10F, -S, and -C as well. Recently found a P07, and it may become my EDC (the -S had been, until I got the -C). I'm enjoying that the magazines are so interchangeable (with the caveat that the -S magazine won't fit in the longer grips of the -C or -F, etc.). I can have LOTS of rounds with fewer magazines while carrying the smaller gun...

Thank you.

Honestly, I don’t know how you could say this. I own a CZ75 SP01 and a Sig 2022. Clearly the CZ’s bore axis is lower than the Sig’s.

I would like to amend my statement...you are correct. I was considering the height of the slide...not the bore of the barrel.

I've got the sp01 too. What a great pistol! The p09 is on my short list.

Thank you.

Either one. Cajun Works is your best bet for upgrading your trigger.

You are right. Flipping the rail from inside to outside doesn't change the height of the bore. Also, the inside railed slide means the amount of slide above the frame is reduced when contrasted with outside railed slides. CZ has very shallow amount of frame to grab when cycling slide by hand.

I'm looking at mine right now, the barrel is inside the slide and with the slide inside the frame it's actually down lower and the grip with the beavertail you can really get close to the slide as far as the smaller slide height I've not had much trouble racking the slide the slide serrations are really aggressive

Thank you. I hope you still like it after watching :-)

@@HammerStriker happy Friday, how about comparing the new Jericho Enhanced to the veteran Jericho 941F? And what pistol would you compare a Bul Armory SAS II ultra light to?

@@HammerStriker Definitely!

This is a very dangerous situation - most likely the round "skipped the extractor" either because the case is jammed or the extractor is damaged. There are some steps to resolve this but the risk of an unintended discharge while doing so is high if you don't know exactly what to do. If you don't already know how to do it, I would suggest you engage the safety or use the docker (depending upon how it is set up), put it in a case without the magazine, take it to the gunsmith in the case, tell him without removing it from the case the situation (make sure he knows it is chambered and that the extractor is not removing the round) and let him resolve it for you. I hesitate to try to list the steps because a single mistake can result in injury or death. Make sure to keep it pointed in a safe direction the entire time you are handling it.

Thank you

M&P got more aftermarket support, go with the one you're leaning towards more. Then get the other 1 later if u want

I shot a mp .40 compact better than my p07 9mm in their first outings, so a 9mm should shoot way nicer

I partially agree, but the firing pin axis is lower than it is on either my SIG P229 or my Beretta PX4 Storm. It's just that a lot of people exaggerate this feature as if it brings it down to the bore axis of a striker-fired gun like a Glock (but it does not). I don't know of any hammer guns with the bore axis quite as low as on a CZ, but you're right. It is not a low bore axis, it is just a low bore axis for a hammer-fired gun in my opinion.

Forum and Brim my HK’s and Cz’s have roughly the same bore axis with the edge slightly going to the Cz’s. The slide being shorter gives that illusion. You’re right though, it’s a low bore axis for a hammer fired gun. However, even high bore axis striker fired pistols like my sig p320 has a lower bore axis than my cz p01 and 75B

That's totally correct. The feature that should be emphasized though is the ability to ride the weak hand/thumb way higher than usual in other frames.

I use a Glock when I want "dead-center". :-)

You still looking for one?

@@NYG5 I got a P09 Tactical instead

Both of these triggers are nice DA/SA triggers, particularly nice in SA.

The worst SA trigger is better than the best striker trigger.