No video :(

You Didn’t Know THIS about Spray Metallic Paint

Подписаться 560 тыс.

Просмотров 68 тыс.

50% 1

Are you struggling from Paint Stripes in your Metallic Paint Jobs? In this episode we paired with Team Luma III as we find out the perfect tips you'll need while using their Exodus Spray Guns to lay down a beautiful streakless finish that will even impress your wife! Hit the play button to get the learning started!
🟢🟢CHECK OUT OUR ONLINE STORE🟢🟢www.amazon.com...
🔺🔺SHOP ALL Exclusive Products found on our RU-vid channel for your project! 🔺🔺
Products in this video:
Check out LUMA III Exodus Spray Guns and Sun Pro : lumaiii.com/
Color Blender: amzn.to/3WQAaAp
MASKING:
EZ Edger: amzn.to/3SMmCEg
10mm Trim Tape: amzn.to/3CbxEvL
Foam Tape: amzn.to/3Q3LWEh
3M Plastic: amzn.to/3i7vFl4
PAINT:
FC720 Gallon: amzn.to/3hQ7rM8
FC720 Quart: amzn.to/3vfFBfo
FC710: Gallon: amzn.to/3PVh0pB
FC710 Quart: amzn.to/3WMJaWm
Primer / Sealer: amzn.to/3mXJjK9
SPRAY GUNS Used on the Channel:
DV1 Basecoat Gun: amzn.to/3RcSQ9j
Sagola 4600 Digital: amzn.to/40wqzPt
Sagola 4600 Non Digital: amzn.to/3ore4r9
CLEANING:
Microfiber Towels: amzn.to/3Nd0YbD
Tack Rag: amzn.to/3Nfn254
Pump Sprayer: amzn.to/3AoasZW
Degreaser: amzn.to/3TcndP7
Astro Sunlight: amzn.to/3NrI3HZ
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
Solvent Cleaner: amzn.to/3fZ2KPn
Like90 particle board: www.collisions...
Other Commonly Used Products:
Tolecut Sanding Dirt Nibs: amzn.to/3PFDcEm
Griots Garage Polisher: amzn.to/3jeim2p
Milwaukee Mini Buffer: amzn.to/3G28ORm

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 174

@PaintSociety Год назад

Thank you for always watching and believing in me !

@EcoMan-te4vu Год назад

Hey Brian, don't over think it- it's only youtube 🥰

@mayan34956 Год назад

What brand of couplers you use or there milton

@pantelisfoutrakis9843 Год назад

Thank you for your time and information you are sharing i wish in 1 year I will be ready to paint my own car at home.

@Matchlessoriginal Год назад

Great work!

@gofastwclass Год назад

Another excellent refinish and lots of good tips, thanks Brian. Milton V fittings are massive. I've been using them for several years and they make a difference in everything air related (not just painting).

@juanmata2433 Год назад

Awesome job sir. Wouldn’t expect anything less than that from you. Guns look well built. Good solid pattern as well.

@johns4384 Год назад

I'm retired now, but I'll still check in with you, just to make sure you're not preaching any mistakes, LOL. FYI, a thing I used to do for making sure my overlap was 75 to 85% was to count my strokes. I counted yours on the left side of the bonnet and you were right at 21 for the half. The fender I couldn't count, but the LFD was right at 20-21 strokes. For that size vehicle, and in most cases these days, that looked like an average size SUV, the number of strokes was spot on. You're the man Brian, and I just want you to know, B4 retiring I spent the last year recommending your You Tube channel to literally dozens of Ohio painters and wanna be painters. Keep up the good work, I'd have you as my wing man any day.

@fullsendmarinedarwin7244 Год назад

Timing is impeccable. Painting my Mrs Hyundai this weekend, it’s a gun metal grey metallic

@alocamaro 4 месяца назад

Hey how did you do Im planning on painting my vehicle ( shadow grey metallic) but i have never painted a car.

@EcoMan-te4vu Год назад

Fantastic as always- I'm in the DIY price bracket but great to see the master at work with any gun

@michaeldougherty6653 Год назад

this is crazy timing because i just found out about these guns and was messaging them with a bunch of questions. this is awesome timing

@leomartinez2367 6 месяцев назад

Brian thank you for all the tips. I'm a beginner, and I like the way you always have videos for guys like me. Subscriber for life!!

@MidnightOilsRestoration Год назад

Great job Brian, i know you don't usually like to walk the whole side.. but you look a confident Jon Kosmoski and the job came out beautiful! This spray gun setup looks really nice brother! 👏👏👏😊

@jmansf3 Год назад

Brian, Thanks so much for putting out these videos. I've been watching a ton of your videos in preperation to spray my motorcycle. As a total beginner I've learned a ton of valuable information and techniques . One thing I would love to see is some videos on painting smaller more intricate parts. Especially a Harley Davidson inner fairing. I've been struggling a lot with this project trying to get paint into all the tight corners and gauge bezels. Can't find any good videos out there. Thanks John

@arielkozak Год назад

Very good job, me and my dad just got doing blending KAD grey metalic for the first time painting and it didn't turn out so good but we finished it. We now appreciate car painters and how hard it is especially metalic paint

@jimmycocks Год назад

Interesting. I'm good w the guns but I can see the light as a helpful tool. I remember back in the day working in a terrible booth where i would shoot metallics with the lights off and the old 3m sun gun. Never tried it but could see the light being helpful to a begginer or novice on white vertical panels where it's easy to get snow blind. Cool vid.

@DrFiero Год назад

The difference between Milton "M" and "V" couplings is huge! I switched my whole shop to the "V" (or Hi-Flow) type. The "V" chucks will also accept an "M" coupling if you don't want to change everything at once. They're a little wobbly when you do that, but 90% fine.

@theevilbeard Год назад

Indeed. If you want something a little nicer you can pick up the Prevost fittings, where the coupler is plastic coated so you don't accidentally bang a panel. Don't ruin a job with regular fittings! Air velocity matters!

@backyardkulay700 11 месяцев назад

cool… the gun layed really nice. im wondering how it goes head to head with dv1 base. i hope you make video bout this. thanks

@timhudson8958 Год назад

I changed my complete air system to 1/2” ID separator , filter and hose then use 3/8 high flow couplings at the gun made a huge difference!

@ntonytay Год назад

Hi Brian, wondering if you can make a video on the color u modify to match the factory paint in the beginning Like what toners you use to tint and adjust.

@PaintSociety Год назад

Yes !

@newriver8940 Год назад

Great lesson as always.

@ricardomartinez-nm3ex Год назад

Man I love it , one day I’ll have guns like that for my little project. Thanks to you and your videos my project is coming out nicely. Thanks Brian 💪🏼

@plazibat281 Год назад

Always good content

@hypefilms6061 Год назад

I think we need a video on tips mixing the paint with different ratios that will be nice

@lohikarhu734 Год назад

Cool hint about covering the paint reservoir... maybe a person could use an old sock, on a smaller gun, but great tip... I'm just a tiddler, but like to learn as much as possible before "committing" to paint on metal...and, now starting my first real metallic job on my car, with even 2k clear coat!

@TundeEszlari Год назад

Sensational content. ☺

@muasboy Год назад

omg, thanks for sharing the HVLP fittings. I'm going to order them now. Been trying to get better spray patterns with my HVLP gun.

@uses0ap Год назад

Color looked pretty good with basecoat only, matte/satin finish

@chrispassarella5634 Год назад

Looks like the 1.5 tip works well on that gun

@toyotacanalpaintlab 29 дней назад

your masking technique so useable

@XgrimmyX Год назад

Great video and work as always. Where did you get your paint suit? I’m in the market for a new one and that’s pretty sharp! Thank you in advance and keep up the awesome work man.

@chriswilliams3379 Год назад

It’s from lumaiii

@MarcBchannel 8 месяцев назад

Very nice guns. Made by Meiji Japan. I have the Meiji version Finer Core 13. Would love to try it in 1.5. Top notch build quality.

@boudreauxcollision2858 2 месяца назад

Great Job Bro!!

@gerardvandenengel9217 Год назад

nice guns,love the ligcht.

@lumaiiiinc-innovativerefin3375 Год назад

Thanks!

@kentbarton7876 Год назад

On a slightly different subject. I’m painting my first car, 1984 Ramcharger, I’m following your channel step by step and have really benefited from your videos! My question is two part, where should I buy the primer ( already applied etching) and what type of primer? Next question, where do I find factory paint to match?

@nygeltzib112 Год назад

At 11:36 when the 2 audios came together, I thought I was losing my marbles lmaoo

@PaintSociety Год назад

Thank you for that. I’ll fix that in the RU-vidr editor

@qwadsight Год назад

I started a shop recently and your videos are help a lot thanks !!

@dougchism5085 Год назад

Fantastic video. I have a project I want to attempt and your instruction is a great help! Thanks

@PaintSociety Год назад

You can do it!

@OFFICIAL_DSR Год назад

I really want the paint society to hit a million subs ❤ you deserve it Brian and anyone else who may be involved in making it happen behind the scenes

@PaintSociety Год назад

Thanks so much! It’s just me and a patient wife

@gregoryjowers3629 Год назад

My last job was dx blue I ended up with 80% overlap sometimes more or less.and some guns might like more or less pressure and distance practice on a old fender.once you get it down stick with the same technique

@alejandromagana8727 5 месяцев назад

Hey, nice job on the Acura as always. How did the clear look in the end with the 1.5?

@davidkeenan5989 Год назад

Do you find the light gets in the way of where you're looking when spraying, or not so much/you get used to it??

@PaintSociety Год назад

Not at all. It’s great

@ElizabethMs-kf7cg Год назад

Mr. Bryan, good good videos from you as always. I want to ask a question or you can try it on your next video. Can you add a drop of your paint to the clear, and apply it on the painted car?

@martinmacchicanto4564 Год назад

thanks for the videos man, really helps a lot. thanks

@chriswilliams3379 Год назад

Let’s go!!!

@davidkeenan5989 Год назад

Very informative, thanks Brian.

@arianduran1725 Год назад

I myself at age 11-13 started helping my neighbors and uncle paint & body work. Now I'm 41 , and always wondered why the metallic pastel color has a weird smell? Especially green bluesh turquoise peach purple and pinkish colors, all pastels. ?

@pauldolden8934 Год назад

Another great video. Any chance you can provide advice on compressors for the home diy, rather than just gun reviews?

@joseluque4094 Год назад

c Can the light be installed on the right side for lefties. Never easy to be left handed🤣

@PaintSociety Год назад

I think the design is for the left side mount. Maybe @lumaiii can chime in

@lumaiiiinc-innovativerefin3375 Год назад

Could be an option in the future

@haydenblack5648 Год назад

I’ve spent the past few years building a chevelle and it was so so so much welding, metal work, body work, blocking until my hands bleed, and I’m finally like 8 working hours from being ready to paint and I’m scared as hell to mess it up I haven’t painted in years

@EamonnDoylePhotoFilm Год назад

I want those guns just for the sticker

@WildDigger Год назад

Great looking paint job! I still need to get my BMW Z4 painted. Ugh.

@steveksi Год назад

Always great content. But where do we garage painters get pro level paint from. All you pros have paint systems from companies like Akzo. I have used Duplicolor Paint shop Lacquer which is not bad, but limited color range. Cheers

@djordjeradevic3307 Год назад

Hi Brian. you recommend exta slow reducer, how about hardener? Is it extra slow hardener also recommennded?

@MidnightCustoms111 Год назад

Me personally I use slow everything.

@jamespolucha8790 6 дней назад

I’m not a painter but I paint my own motorcycles never tried a car or something bigger until now , I tried to paint my truck cap and it’s dark gray metallic, I got what people call tiger stripes what am I doing wrong? I tried closer then backed up , my gun is wide open the fan pattern looks good and I was set at 25 psi, oh yeah it’s a base coat

@o0CASEONE0o 4 месяца назад

Why did you change your technique with this gun? Is it harder to spray slower?

@chrisb5515 7 месяцев назад

Do you use a filter in the gun with the base metallic?

@btbd2785 Год назад

Never heard of this brand. How does thgiw hin compare with comparable spray guns from the IWATA, Sagola, DeVillbiss etc..?? So the optimized pressure version is based on HTE, so can be used with smaller or lower psi compressors?

@lumaiiiinc-innovativerefin3375 Год назад

Performs equal to or better in our opinion. We recommend PSI settings of 18-23🤝

@btbd2785 Год назад

@Lumaiii, Inc - Innovative Refinishing Tools My question was, is your optimized pressure version run on lower psi like what you can with an HTE gun. 18-23psi are WHAT HVLP guns would run at. HTE typically runs at a much lower psi like 9-12 some even lower. That's why I was asking if your spray guns can work at lower psi.

@jeremyoetken2094 Год назад

BTB D I spray both the color coat and clear coat gun at 22 psi. Just as good as any other spray gun you can use

@TheMaster7891 Год назад

Nice video. Are you ever making a video on the civic hatch that bodevision worked on?

@ivangheor9961 Год назад

Hi Brian quick question...Does mixing some slow reducer into the clear coat to help it flow and lay down smoother ( 5 to 10%) doing so does it damage or ruin the Clearcoat in the long run? Does it shorten the lifetime of that clearcoat?

@Imwright720 Год назад

I don’t see the spray gun on your Amazon site. I’m guess the clear was your 2nd coat since it was heavy. What volume of clear did you use. ❓❓❓❓

@davemcaferty6347 8 месяцев назад

Good video how dose the base coat gun you are using compair to the devious you used on the other video painting silver metallic

@petergorman5725 Год назад

Hi Brian, brill videos, Quick question, Ive always wondered how you know how a car dissasembles, ie door handles etc, is there some software you use or is it the oe manuals. for info .

@masterprogrammer8332 Год назад

A few errors I see, but the end results are very good. Looks like everybody is different :) - Mixing black into the gun - I would never think that would be allowed, but again, it seems to be working - Plastic sheet around where you paint. I often get flakes sticking into the paint when I remove them, so it was always paper for me. And not just a 5cm, like that yellow tape, but a lot wider. Or maybe paint sticks to these sheets better? Especially at 18:18, the whole sheet seems to be sticking into the paint. It's dry, but I'm sure it's not that dry the following day. Or you waited days to remove the sheets? - Starting the base from the bottom - is the colour matching after this? At the Autocolor course, they teach you need to start from the top, and lay down a half coat from a distance at the end, that will bring up the metallic. Especially important with mica and some metallic colours, otherwise it will be flat, and darker. - Clearcoat air and fluid on max? Eh, how is it not getting orange peel then? Or maybe it's a very good gun.

@PaintSociety Год назад

The plastic is treated not to flake Paint from the bottom up in this case and finish the blend at the top. Less overspray.

@richardlambert2028 Год назад

- As long as the pot you add the colour to is all the colour you have for a full coat, it's fine! (If you had to top up the pot with more colour, it'd be hard rematch more black again). - Good quality plastic has static on one side to stop the paint flaking off all over your job when you unmask. There is a specific side you need to spray. The wrong side will leaves flakes. Being in that booth, he would have baked it and the paint is well and truly dry enough to be touched. Any tape is fine, comes down to preference. - Everybody has a different preference, as long as you paint your colour match spray out card the same way, you'll get the same result. You can see in person if it's sitting correctly on the panel compared to the blended area. - Base coat doesn't really have any build so you don't get orange peel from it. With clear, everyone has their own sweet spot. On my DeVilbiss I have my fluid 2.5 turns out and air around 2 bar. It also depends on the speed of the hardener and thinner used and temp in the booth. Get as slow hardener/thinner as possible to give it time to flow, but not run. There's a sweet spot and the peel will be at a minimum.

@shawns57garage Год назад

can I use a cheap gun to get decent results with a metallic base/clear paint job ? what tip is good for the base and what tip for the clear ? (This is on a complete restoration)

@angelmorales220 Год назад

Awesome job

@billybubba600 10 месяцев назад

Another Great video, Brian! I have a question for you. I've got a 2002 F250 and the paint looks ok for the most part, but there are areas where the clear coat is starting to flake off. I would like to repaint it (same color) but as I'm on SS, it's gonna be a FYI home job. What would you do about the clear coat? Can I just sand and blend in the flaked areas, or how far should I go with removing the clear to prepare it. I know the key word is preparation, preparation, preparation, to get a great final finish. But I'm just not sure how far I need to go to make sure that the old paint doesn't cause problems once I get the new paint applied?

@PaintSociety 10 месяцев назад

You can 180 all the old paint. Then 320 sand. Then 2k surfacer primer and you should be fine to sand that with 400-600 before paint

@tojan111 Год назад

Do you ever use inline filter before the gun?

@victorwilks88 Год назад

I'm here 😮

@lukmansalam634 Год назад

Very good job

@chvydrptop 5 месяцев назад

What reducer would work for cooler like 55?

@carlo127 Год назад

hello Bryan what is used for Blender in solvent paint? in my case I use ppg solvent paint, thanks

@jerrybillings4720 Год назад

What's color going to look like at the front bumper area?

@shenazbutt2837 Год назад

good job sir

@johnjenson5738 6 месяцев назад

So when you run wide open on fan and color you are moving pretty fast.Yes or no?

@Mysterymeeet 5 месяцев назад

Not fast just consistent, watch your material as it lays down

@maksimkuchmistyi9287 Год назад

I was just thinking about purchasing this gun for clear, but now I’m a little confused. Seems like you got it all orange peely, isn’t it?

@maxedmoto Год назад

for a pro would you choose the DV1 or this one?

@lifechanger3239 Год назад

Hello Brian. i have a question for you. i really struggle with spraying wet on wet primer(filler). I use spectral 3:1 primer which has an option for wet on wet spraying. but when i use it i have a huge orange peel effect with 1.3mm. I wonder what you use , how you mix it and did you sand it or not. Thanks alot , continue with the channel , its really helpful. ! Good DAY.

@PaintSociety Год назад

Reduce it by 10% that should help

@lifechanger3239 Год назад

@@PaintSociety i put for example 100ml primer 30 hardner and around 15 20ml reducer. Thats the recommendet. And i get huge orange peel. If i put 40 or 50% reducer than it fix. Idk

@lifechanger3239 Год назад

@@PaintSociety ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JqpsCzTkREQ.html thats the product

@drumman-de8ku Год назад

If I spray 5_8" from panel it is dry .I have a habit of trying to put it on wet,using single stage paint. I always get runs and I'm tired of sanding it.always get runs I've tried everything

@PaintSociety Год назад

Dial in your fluid and move faster d

@arkadiuszkusiak7289 2 месяца назад

A great gun, but it's nothing more than a copy of the Japanese Meiji Finer-Core gun .This is a company with a very long tradition I use one of them, perfect atomization and a lot of material savings on the HVLP head. Regards from Scotland UK

@bamdragon25 Год назад

I commented on a previous video about sprayers but didn't see a response. I have a 5 gallon air compressor that does 5scfm@40 psi, or 3.8 scfm@90 psi. Are there good sprayers for that or is that even good enough for paint jobs?

@PaintSociety Год назад

No you’ll need more gallons

@abelferreira9263 Месяц назад

Regulacion base bar’s?

@Bimmer2047 10 месяцев назад

so what were your final thoughts on that 1.5OP tip on the clear

@PaintSociety 10 месяцев назад

If you told me, it was a 1.5 I wouldn’t even know, functions just like a regular 1.3.

@rcspraygunvlog8124 Год назад

Very nice sir Bryan ❤👍💪, can I order or buy a spray gun I'm from the Philippines 😊

@karlavillajulca9683 Год назад

awesome video 😊

@ronaldmunar4957 Год назад

What is the size your nozzle for mettalic

@Joe-yz7fk Год назад

What if my gun is not an Hvlp ,would it be a bad thing if I used the Hi Flow fittings?

@PaintSociety Год назад

Yes. Use them

@chicagopd-best Год назад

Hi Brian is something wrong with voice on 19minutes goes mute

@mikew8722 Год назад

Extra slow reducer....where I live, its usually 70....should I still be using the slow reducer for my metalic basecoat and clear?

@PaintSociety Год назад

Use slow. I chatted about this in the video

@roob429m4 Год назад

What's up with the tape on the cup of the clear coat spray gun?

@PaintSociety Год назад

Ohhhh for sure you didn’t read all the subtitles 😂

@christopherbrougham Год назад

Hey Brian - thought I'd done a good job following good practice but a part of my metallic after clear looks a bit crazed and webbed as though it's broken up a bit and not smooth. Any ideas why? (I know it's difficult not seeing a pic but can't see an email on you home page.) It is winter here in New Zealand so wondered if it may have been too cold - 59 F - and the clear has reacted with the base which was cured and looked fine prior to clear. Thanks if you can help. (2k aerosol primer, 1k aerosol base and 2k aerosol clear.)