ZF6HP19 Teardown 

I just want to thank you for this tutorial!,i mean you did teach us all now how todo a full overhaul on this transmission.its Priceless!.i wish you all the best and to make more educational Tutorials like this.Watching you all the way from South Africa 🥂

Thank you so much for this video guide, I'm in this rebuild process and everything is going so far so good

Legend for posting this video 🎉

Great video thank you I can't wait to see the rebuild video

Amazing skill for detail you have

Good work thanks for sharing

Hola muchas gracias por tus videos, sirven de gran ayuda

Great video! Thanks Gary!

Very good

Thanks for video.

Thanks Gary!

my hat goes off to you sir and i look foward to the same trans reapair on a 2012 bmw 328i n20 engine f30 chassis

Thankyou

Love the vids and appreciate all the information you’re putting out. I’m currently rebuilding a 6hp19 and I’m having an issue with B clutch drum not coming out. For you it came out so easily but I’m hopping that mine isn’t seized or something else. Thanks

Boa noite meu amigo. Seu vídeo show. Gostei muito.

Another great video. One question: did you not replace pistons?

Hi Gary, just a want to know when replacing all clutches, should I replace the oil pump and clutch plates as well and is it necessary for a complete gasket set?

Hi Gary Ferraro. I am from South Africa and I like your videos. I drive BMW E90 LCI 320d 2011/06 model. I have hit the speed bump on December 2021and had a CCID Code 420 (Transmission Malfunction). I have experienced the following codes 004HP85, 004HP89,004HP8A,004HP95 and 004HP82 on August 2023. I have replaced transmission oil using 6 liters of Liqui Molly 1800 I could find ZF6 Lifeguard oil after 268376km. Recently an Autel MK808KS scanner shows 004HP82 and 004HP85. What could be the real damage on the transmission?

Hi Gary, Appreciate all the information in your videos. I have a 2007 BMW 335i that I have owed since it was new. Lately I have been having drivability issue related to the transmission. I have no codes hard and rough shifts. I am thinking of doing a complete valve body rebuild. I have seen in your videos you replace the dampers and use a zip kit. Would you happen to have part numbers? Also where would you recommend I get these parts from? Also is there a complete transmission service kit? Thanks for your help, God bless.

Very, very deep detail for the xf transfer, thank you. My question: I have a 2010 Jaguar XF with a ZF transmission There is a problem with the transition only from N. to D It clicks With a harsh sound at speed 60 some of the time. Does the transmission need a complete repair?

So instead of saving it under name “boot_logo.jpg” you need to save it under name “boot_logo” saved as a jpg file. It doesn’t need to have .jpg written in the file name. That was the problem I was having.

Outstanding video. I have a ZF6HP21 that the car will not go in drive or reverse. Car acts as if it is in neutral. When shifting back to park it grings with engine running. No transmission codes etc. Could it be a pump or valvtronics?

Did you do a follow up video?

Question. I have the steel clutches i need from ZF. One side is flat the outher side appears to be rounded. Is there a certain wat to install? Round side up or down?

thank you for the movie. I have a bmw e61 with 6hp26 on the oil pan there is an original yellow sticker, could it mean that the filter has never been replaced?

Hello, thank you so much. Those information are really precious for the understanding the 6hp gearbox. I have a similar issue. Fault code 4f87- 1 to 2 gear ratio. I changed all seals related to mechatronic, the separator plate and solenoids. Do yo have any idea of the cause of this?

Where do you buy all the parts to complete a full rebuild like this??

Does bad torque converter can cause burning clutch and ratio monitoring code ?! Thanks 🙏

Hello Garry, i have a problème with Audi A4 3.0 tdi 204 HPwith zf6hp19, Can i change torque with one frome Audi A6 same zf6hp19 but 3.0 233hp?

Hello sir, thanks for sharing! I'm in the process of an engine swap on a bmw n52 engine with this trans. I ran into an issue that you may be able to help with. Do you have part # or dimensions for o-ring on shaft which connects into torque converter?

I have mounted a rebuilt and stiffened torque OEM torque converter in my ZF 6HP 19 and it shudders a bit, especially between 1000 - 1500 rpm, when it changes gears ... can this be normal and not to worry about? Also, is it true that an upgraded/stiffened torque converter can damage the mechatronic valve body (to wear out prematurely)?

Why did you send the converter for a rebuild?

HI what is the parts cost approx

hi gary how are you. i have 2010 E70 bmw x5 has fault code 04EB5 output stages, voltage supply. i run a test for this code fault by using bmw ista software but no result and it says to ignore the fault. i had this fault a month ago and i end up deleting it and now i have the same fault code with the gear selector stuck on P position. the dealer recommend to replace transmission but i was thinking maybe one of the solenoids are bad specially the one responsible for parking release or maybe the TCU bad what do you think?

I have a 2005 BMW 530i Automatic and car drives normal just clunky shifts but from 3-4 and up it slips then I get code 4F85 Clutch E ratio Monitoring come up and I just changed the fluid and it did nothing what would you suggest is wrong it only slips sometimes.it’s. GA6HP19Z transmission

Very good