ZZP PORTED MANIFOLD & PCV UPGRADE INSTALL ON '12 CHEVY SONIC| Power & efficiency with ZZPerformance!

Подписаться 6 тыс.

Просмотров 14 тыс.

50% 1

ZZPerformance comes through again with great mods for great prices for my 2012 Chevrolet Sonic 1.4L 6-speed. Installed the Ported Intake manifold! and the PCV Upgrade Kit that the offer. For those who don't know, the stock PCV system in Chevy Sonics and Cruzed is horrible and will fail, and cause your valve cover gasket to fail too, so this pct upgrade is a must in my opinion.
As for the Ported manifold, when it comes to power and efficiency it is another must!, th eOEM Manifold comes with at least 1/3 of the intake runners blocked at the exit, robbing your car of that vital airflow it needs to make this little 1.4Ls run stronger and smoother
In combination with this ZZP ported manifold and their Cold air intake, I've gained and additional 3 MPG and noticeable power during low to mid RPM acceleration. Thanks ZZPerformance!
ZZP Upgraded Radiator Install Video: • HOW TO INSTALL ZZP UPG...
OEM Oil Cooler Replacement: • HOW TO REPLACE 2012-up...
**DISCLAIMER**: This video and description contains AFFILIATED LINKS, which means that if you click on and make a purchase with one of the product links below, I may or may not receive a small commission.
Parts used
-ZZP Upgraded Manifold: zzperformance.com
-ZZP PCV Upgrade Kit: zzperformance.com
-Pick Tool: amzn.to/3r6eiFA
-Auto Clip Pry Bar set: amzn.to/3pureEM
-14pc ETorx Socket set: amzn.to/3qKdK8a
-13pc Torx Bit set: amzn.to/43UJZzQ
-GM, Ford, Mazda Fuel Line Disconnect tool: amzn.to/3CQKhMG
-OEM Injector O-Rings: amzn.to/3NSxpuH
-Seafoam Engine/Injector cleaner: amzn.to/3r1jzy2
-CRC throttle body cleaner: amzn.to/3JFQlv4
-Locking Pliers: amzn.to/3VWiTp4
-4 pack Box cutters: amzn.to/44rO8f0
-24V Cobalt Impact Driver 1/4 in: amzn.to/3O3lR9h
-Shop Towels: amzn.to/3ruWqlp
-LED Head Lamp: amzn.to/3mbqKRO
-108 Piece Mechanics Tool Set: amzn.to/3I1dEND
MY CAMERA FILMING GEAR:
GoPro Hero 8- amzn.to/3gNDPKK
GoPro Hero5 Session- amzn.to/3iSYEY4
Rode Compact Mic: amzn.to/41voq76
GoPro Floating Hand Mount- amzn.to/3vJC4Uq
Accessory Kit for GoPros- amzn.to/3wJHRuv
Portable 10000mAh Battery Pack- amzn.to/3gQf1SG
Be sure to check out my other videos in this playlist!
• MY SONIC TURBO
SUBSCRIBE and turn on that bell notification so you don't miss any upcoming How To Videos & Upgrades
/ everythingavron
FOLLOW ME on Instagram: / everythingavron
ADD ME on Facebook: TheEverythingAvron
LIKE & COMMENT BELOW! Always open to ideas and feedback on what you'd like for me to work on next!
#zzp #zzperformance #oilcooler #chevroletsonic

Авто/Мото

Опубликовано:

29 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@jvg6205 7 месяцев назад

Just a tip for the fuel injector connectors. You can just push in on those clips. They spread out when pushed in and allow you to pull the connector out at the same time. Just so you dont have to deal with the possibility of losing them

@EverythingAvron 6 месяцев назад

Damn that is very beneficial information! thank you for that!

@erikfraenkel9365 2 месяца назад

Did you mean you can just put the clip on the fuel injectors and they will secure themselves when you seat them? That’s what I noticed.

@ascheme9705 5 дней назад

Goat

@charleslowe522 7 месяцев назад

Thanks for the upload, I found it quite useful. I have the ZZP Intake, PCV and Catch Can and Turbo Cover to install. I can't believe that GM did nothing about the damn PCV design and a little 1/2 cent nipple caused such a big issue.

@EverythingAvron 6 месяцев назад

Exactly! but it is what It is I guess haha

@gadafthegreat 11 месяцев назад

Thank you so much for this! My GF has a 2017 Sonic and currently she's dealing with the dreaded p0171 code. Gonna be doing ZZP's Aluminum valve cover and the pcv fix. Your video is super easy to follow and gonna make the install painless haha.

@interceptus 8 месяцев назад

Great video. Helped me throw on the zzp pcv upgrade. Only thing i did differently on fuel injectors was top and bottom seals. I'll use this easy to follow video again when if i get the ported intake manifold. Thanks!

@renedelafuente123 2 месяца назад

Man I need you for my mechanic especially on the 2014 Chevy Cruze Lt. Thanks for the video

@jimkatrenak8735 5 месяцев назад

Well done. A shortcut is to remove the fuel rail and injectors from the intake before removing the intake. No need to depressurize the fuel lines, since you do not break the line. The fuel line, rail, and injectors can be moved out of the way intact.

@SMILEY.45 5 месяцев назад

If you take the cowling for the windshield wipers off it gives you a little bit more room. It is just two pieces that slide together so it's easy to get in and out

@josuesanchez2742 9 месяцев назад

I always had a po420 code with zzp oil catch can finally gone with this set up js 🤷 and also hade blowby and its runing better

@rakkasanveteran1619 7 месяцев назад

Well now I have some new toys to look into for my 15 sonic. I've slowly but surely been replacing all the plastic parts with aluminum parts, just wish chevy would have done this instead of the plastic pieces that eventually go bad after a few years.

@EverythingAvron 6 месяцев назад

100% true.. this little hot running engine eats these plastic pieces up in a few years seems like haha. the plastics are a maintenance item it seems

@user-qo9qe2wx5r 10 месяцев назад

좋은영상 감사합니다 👍

@EverythingAvron 10 месяцев назад

Your welcome!

@gabegabber2996 11 месяцев назад

I put on the PCV fix kit and manifold spacer on my Sonic before i could afford the ZZP manifold. It was a pain. Not looking for to replacing the intake manifold but it has to be done eventually.

@EverythingAvron 10 месяцев назад

Yea… I hope I never have to replace it again… it’s a pain to do lol

@renedelafuente123 2 месяца назад

Excellent video explanation you did. I have similar vehicle problems 2014 Chevy Cruze Lt and have 2 questions. Does the new zz ported intake manifold that has the orange 🍊 check valve inside more improved for it not to fall off like factory one? Or can the orange check valve be replaced without taking off the whole intake manifold? I know they sell cruzekit but wanted to keep it all factory if possible. Thanks for the video and any feedback appreciated

@rottmanthan 4 месяца назад

i wasnt sure how the 1.4 manifold was made, the 1.8 manifold doesnt have those parts that were removed from yours as they have adjustable intake runners, its a similar idea but further inside with an electric actuator.

@Konor785hi 10 месяцев назад

Hey are you going to jax wax in tampa on the 8th

@Iownaeg93 Месяц назад

I hit the sub for sonic content lol

@carlosvillafranca6486 6 месяцев назад

Hey boss hope you had a happy holidays and new years! Hows the car holding up after these upgrades?

@EverythingAvron 6 месяцев назад

Happy holidays to you too! and its excellent, I put about 600-1000 miles on it every week believe it or not and she runs efficient and strong to this day! I'm approaching 160,000miles 👌

@ryanudairam2002 2 месяца назад

How do you remove the plugs on the tags on the engine harness? Having a hard time rn getting at that. 🤔

@brandonboyer7486 7 месяцев назад

Skunk works makes all kinds of stuff for those

@EverythingAvron 6 месяцев назад

really!? I hear BnR does too

@user-lq9el2hi5g 5 месяцев назад

I’ve never trusted them clamps. I prefer if the would do spring clamps

@Zeek800 Месяц назад

Yup those “ screw to tighten “ hose clamps almost always back off over time.

@JoseGarcia-sb1fg 3 месяца назад

how big of an impact on your MPG if you start doing slitght bolt ons? I'm thinking about getting one as a daily but still want it to be quick

@TEPL1 15 дней назад

Did the ported intake manifold throw any lean engine codes? I figure more air but the same amount of fuel may show as too lean.

@AndreiDPop 3 месяца назад

Curious how you think you’re improving efficiency by installing a manifold that removes turbulence tumblers which improve atomization of fuel, and increasing the crack pressure of the check valve in the vacuum pcv path to where nearly half of all vacuum conditions are no longer applying crankcase vacuum and therefore not assisting in piston ring seal on the low tension piston rings. You’re making more power, but efficiency has gone down.

@noahmunoz8820 3 месяца назад

Would this work on a chevy aveo

@Zeek800 2 дня назад

Excuse me if this is a dish question but how does “ opening up the airflow “ in those ports improve fuel mileage? Also wouldn’t this modification “ lean “ things out requiring more fuel flow?

@SonicSouz 11 дней назад

Their kit is simply sucking oil out of the valve cover and back into the turbo. I've been running their kit for 2 months and have found 2/3rds of the oil is just gone, sucked in through the unfiltered hose from the oil cap to the turbo inlet.

@grammarpolice5554 11 месяцев назад

What about the orange check valve that’s down in the intake manifold? Does the ported one delete that or is it already sealed off?

@EverythingAvron 10 месяцев назад

If it’s the one I think your talking about… it’s still there. Just new

@kylevanwinkle2081 7 месяцев назад

That's what the spacer does it deletes that air path and reroutes it to the catch can which has an upgraded check valve. I prefer the cruzekits pcv fix kit as it doesn't need the spacer or catch can. I may in the future do the ported intake but this is a commuter car so unless the factory one fails I doubt I'll spend extra on parts. Thankfully the valve covers are cheap and easy to swap considering the vacuum regulating valve fails daily often on these cars

@erikfraenkel9365 2 месяца назад

How did you Manage to get the connectors loose from underneath the car? I can’t get anything on the clips as my needle nose is to small.. don’t I have to squeeze them then pull?

@erikfraenkel9365 2 месяца назад

Had a much easier time taking the clips off back while I was able to twist the manifold and get at them with a needle nose and pry out, thanks for showing that they are supporting it and that they need to be removed to come out. Currently just got it out and following your video 🙏 going to be nice with the Bosch 42 and bigger throttle body

@edgardoarroyo7418 7 месяцев назад

Just bought a Cruze LTZ 2012. This oil catch can fit or just for the Sonic?

@charleslowe522 7 месяцев назад

The oil catch can should fix for the Cruze, I think you have to specify when you purchase Cruze or Sonic.

@EverythingAvron 6 месяцев назад

correct to what @charleslowe522 stated. you have to specify when purchasing what car you have

@60882tc Год назад

Any issues with check engine lights after this installation?

@LetsChat Год назад

Same question.

@EverythingAvron Год назад

None at all so far. Already have about 5000 miles on it, no codes

@ryannewnham8826 5 месяцев назад

Do you know the standard cc flow for injectors please

@randyobrien5646 5 месяцев назад

Stock 1.4 injectors are 33#.

@edgardoarroyo7418 7 месяцев назад

the pvc kit is to fix what issue?

@EverythingAvron 6 месяцев назад

The factory pcv system for these cars is notorious to fail and cause ventilation issues and crank case pressure issues ultimately causing valve cover leaks amongst other issues. so this kit helps prevent that and allows for a collection point for all the blow by that occurs on these lil engines. It greatly increases the reliability and longevity of your PVC system.

@j4rules425 11 месяцев назад

Does it need a tune?

@EverythingAvron 10 месяцев назад

Nope no tune needed!

@charleslowe522 7 месяцев назад

No tune needed, but with the ported manifold if you decide to you could get a tune along with new 72# valve springs. Helps raise the rev limiter, but in an automatic car not sure how much that helps.

@dandoingthemove9626 11 месяцев назад

Bnr I've heard better about, they have the gtx250 turbo

@charleslowe522 7 месяцев назад

Maybe, but ZZP is local to me here in MI. Hopefully my blind allegiances doesn't lead me astray.

@rigilkentaurus3313 Месяц назад

So the manifold is the same with a little material removed? Why not just remove that material yourself? It's plastic and it would take like 30 minutes.