Join this channel to get access to perks:
/ @davesworld2132
Contact me at www.supercruzes...
Dave's World Discord Server / discord
Need CRUZE parts?: www.davescustom...
KNN Air Intake System 16-19 CRUZE amzn.to/3U1cmqs
/ turbobayperformance
Ikon Spoiler Parts / tools
Ikon Spoiler amzn.to/3HLhtXX
6MM studs for spoiler amzn.to/3YBf09l
6mm nuts for studs amzn.to/3x8NRi6
fender washers amzn.to/3XiDbZ4
Black RTV Silicone amzn.to/3jQ00FF
Battery powered grinder amzn.to/3XnyzRk
Batter powered ratchet amzn.to/3HNGhyy
Batteries amzn.to/3jJEJ0m
Charger amzn.to/3DQovtl
Hole tap and die set amzn.to/3RM5Vbn
Tools
Spark Plug Gap Tool: amzn.to/3MhQyTT
Expensive Spark Plug Gap Tool: amzn.to/3GOKl0w
Firewall wire tool: amzn.to/37fVCd6
Dave's World build parts
NGK Spark Plugs: amzn.to/3y12LbS
GM Delco spark plugs: amzn.to/3xYTW2i
Turbo gasket with heat shield: amzn.to/3slHMx9
Link to the CRUZE IKON Spoiler: amzn.to/36d7VpC
Link to my KNN Air intake: amzn.to/3CDAkRF
Link to the 18" Enkei EV5 Wheels: amzn.to/366pUxQ
Link to gunmetal 18" versions: amzn.to/3vXAAK0
Link to Glow shift boost gauge : amzn.to/3Cxh7Be
T fitting You can use: amzn.to/3nIs0K2
vacuum hose I used: amzn.to/3IAEfjZ
Air fuel ratio gauge: amzn.to/3JFDRko
Fuse circuit add on : amzn.to/3uNcNf0
Universal gauge pod: amzn.to/3EiyRBc
Handy free car buying book! amzn.to/37Dr7Om
CRUZE p0299 and P1101 code fixes Dave's World Super CRUZES
P0299 is a diagnostic trouble code (DTC) that indicates a low turbocharger or supercharger boost pressure. Here are some possible causes of the P0299 code:1. Faulty turbocharger wastegate solenoid2. Malfunctioning or defective turbocharger3. Intake air leaks or other pressure system malfunctions4. Clogged air filter or restricted air flow
1. Faulty MAF sensor: The mass airflow sensor (MAF) measures the amount of air entering the engine and sends this information to the engine control module (ECM). A faulty MAF could cause the P1101 code to appear.
2. Vacuum leaks: Any leaks in the vacuum system can cause the P1101 code. Air leaks in the vacuum system could cause a reduction in pressure in the engine, leading to poor fuel economy.
3. Faulty throttle body: The throttle body controls the amount of air entering the engine and is controlled by the ECM. A faulty throttle body could cause the P1101 code to appear.
4. Intake air leaks: Any air leaks in the intake system could cause the P1101 code as it disrupts the proper air-fuel mixture. The leaks could be in the hoses, gaskets, or intake manifold.
5. Faulty ECM: If the ECM is not communicating properly with the MAF sensor, it could cause the P1101 code.
6. Dirty air filter: A dirty air filter could also cause the P1101 code by obstructing the air flow into the engine.
It is important to have a qualified mechanic diagnose and repair the issue that caused the P1101 code to avoid further damage to the engine.
Due to factors beyond my control, I cannot guarantee against the improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not David who is seen in this video.
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all products, I recommend testing the gauge before beginning the install process.
⚠ DISCLAIMER:
While I strive to make the information provided in this video as accurate as possible, I makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I am not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 окт 2024