There is no specific brand we use. We have use commercial products and made it up from powder. With either version, watch out for particles in the trypan blue. I find they will always appear given enough time. These particles can through off the reading from the Countess.
I am not a microbiologist, so I cannot definitely say it will work on any bacteria. There are alternative protocols that do exist. The purpose of going through each of the steps was to explain the reason we use each of these techniques. The great thing about science, is that it is always evolving. Once I discover a better technique, I switch to it after I have tested it myself. As a result, the way I run protocols in the lab is completely different today than it was years ago. One caveat is if you are working in industry. If you have a protocol approved for production, it cannot be changed with out going through the approval process again. So it is very important to have the best protocol before submission.
Can you do a video of growing normal edible egg from scratch in the lab. Like ivf you take the egg from the hen, but you growing the egg in the lab without fertilizing it.
@@ProfessorDrewCollop I know, but I thought scientist now have a way to grow edible eggs that is not fertilized. Guess it's my imagination, I was just so interested in most of your videos. That's why asked if it's possible to have a edible egg in a lab without a hen. But since it's not possible, it's fine. Thank for responding back, I really appreciate.
There is a process to grow edible meat in the lab now, without killing animals. Search for "Clean Meat" or "Cultured Meat" to get more inform. A process to replace the creation of an edible egg is not cost effective. Hens are cheap and not worth the effort.
Concentration is irrelevant to the volume of your solution. The volume is only important if you are trying to determine the amount of the solute in your solution. As an example, you could have 0.5 mL of a 1000 cell/mL sample. It does not matter that it is only 0.5 mL, the concentration will still be 1000 cells/mL. As the concentration is a fraction, it can be used as a conversion factor to determine how many cells are in your 0.5 mL sample. Mathematically, it would be 0.5 mL X 1000 cells/mL. The mL units cancel leaving you with 0.5 x 1000 cells = 500 cells. Therefore you have a 0.5 mL sample, with 500 cells in it, with a concentration of 1000 cells/mL. Hope this helps.
I would not advise you drink it after the Biuret solution has been added. It is highly basic and contains copper sulfate and potassium sodium tartrate.
The alkaline lysis technique is optimized for purification of plasmid DNA from bacteria. The alkaline environment keeps the DNA denatured. Bacterial DNA is supercoiled, so even when it is denature, the strands remain in close proximity to each other. The genomic DNA is bound to other macromolecules (proteins & lipids) and will precipitate out of solution during neutralization of the alkaline environment. Many of the kits you buy come with a filtration tube. This will filter out precipitated DNA and allow the plasmid DNA to run through the filter and into the lower collection tube after centrifugation.
The Bunsen burner is there to heat the air in the neck of the flask. Hot air rises, so the air in the flask will flow up and out, helping to prevent contaminates from floating down in to your flask. If you don't have one, you might just have some contamination issues, but hopefully you will get many sterile plates.
You might want to check your audio, as there is voice over for 50% of the video. At the half way mark I state that I am just going to be running the samples for larger number of wavelengths and I stop the voice over at that point, as it would be superfluous to continue speaking.
@@ProfessorDrewCollop Yes; indeed. Could you please share the plots of the final output, on x-y axis? Also, in practical terms, what characteristics can it measure in wastewater?
Sorry, I cannot add the final graph to this video, as this is an activity I get my students to perform after watching the video. If you really wanted it, you could graph it yourself. Plot wavelength (nm) as your independent variable (horizonal axis) and Absorbance (no units) as your dependent variable (vertical axis). The Spectrophotometer measures absorbance of different wavelengths of light by a sample. As a Biologist, I do not work with waste water. I suppose you could analyze the turbidity of the water as a function of how many particles are in it. We have some Chemists and Chemical Engineers, within our department, that work with waste water. If you are really interested, I could put you in touch with them. The Spectrophotometer works best for a single known chemical, with a known wavelength of maximum absorbance.
I am currently doing a master's degree in the animal breeding department and I am also an agricultural engineer/zootechnician. And I am about to complete my master's degree by receiving a significant project scholarship in my country, which aims to manipulate the gender of chicks by injecting herbal and artificial materials with the in ovo injection method. I have provided long-term support to many projects using feed and animal materials on poultry. I am the first generation in my family to pursue higher education and I am looking for a PhD education with a scholarship. Due to my increasing interest in laboratory studies, I have also completed the laboratory veterinary health department and am in the internship phase. I am looking for an internship in a laboratory in the field of poultry nutrition or breeding for the summer term. I have a laboratory animals certificate and a B1 level English certificate. I followed some of your works on RU-vid with interest and reached you. I live in Turkey and I do not want to leave the field in which I work with interest due to financial difficulties. I would be grateful if you could guide me. Best regards
Sounds like you are passionate with what you do. That is so very important. Are you referring to the manipulation of the sex of the chicks? Gender is a social construct. Sounds like a very interesting project. What type of chemicals modify the sex of the chicks. They only gestate for 3 weeks. You must need to inject the eggs very early. How to you ensure sterility. I am unsure as to what kind of guidance you are looking for. I do not take PhD students, if that is what you are looking for. Happy to answer any more questions you might have.
good day professor, why is the boiling necessary for the reduction of sugars to take place, what causes the color change in the tubes, and what are the reactions called in this test? i am currently researching for our chem project and there are some things we havent understood properly due to our own professor's poor teaching so i apologise for the lack of knowledge
I am sure there must be ample resources to explain the reaction if you were to Google it. In short, the heat usually needed to open up the carbon ring in the sugars. In Bial's test, the sugar is first dehydrated (loses water molecules) to create a new compound. Pentoses create furfural, while hexoses create hydroxyfurfural. These products will react with Bial's reagent, turns it from a yellow solution to a coloured solution. Furfural will turn blue-green. Hydroxyfurfural will turn brown. The chemicals in Bial's reagent include orcinol, ferric chloride and hydrochloric acid.
Sir i want to perform some experiments on a muscle .... So i took out muscle from a chicken (not from embroy like after killing it) and i kept it in normal saline as a physiological solution and after adding a pinch of glucose ...will this setup of my will work and if it does how can i make muscles contract in vitro
This experiment is performed to make cell lines. You need fresh tissue that is not contaminated. Adult tissue does not work great, as the cells are bound tightly together and the cells are not in a state of constant cell division, like in the developing embryo. You will then need to disaggregate the tissue into individual cells, if you want to make a cell line. Without a circulatory system, the solid tissue will die as a result of a lack of oxygen and other nutrients. If you want to stimulate the muscle to contract, that is a completely different experiment. You need to harvest the muscle and find the nerve that stimulates it. Then you can apply an electrical current to activate the muscle fibers. I believe I performed an experiment like this on frogs back in third year Physiology. That was a course that changed my life.
What method would you use for bone marrow isolation from the femur of that small chicken embrio ? The femur is too small to use a needle to extract the bone marrow. What method are used ? Thanks
I assume you are asking about the age of the embryo. Once a chicken egg is fertilized the embryo will hatch about 3 weeks later. The embryos we used for primary culture in the lab are 2-weeks past fertilization. The embryo in the videos is slightly more than 2-weeks old by a day or two.
I believe you emailed me this question already. If not, everything is autoclaved when we are done with it. In terms of references, I don't really have one. The protocols tend to evolve semester to semester as I learn new things or experiments don't work.
Your gating protocol please. I have started setting my own gating protocol and have been comparing results to our manual counting method. I have no other means for comparison, and I contacted ThermoFisher but they didn't provide much support. Thank you. @@ProfessorDrewCollop
I had the same issue with ThermoFisher. I contacted them to get their gating protocol, but they offered no support. I really don't understand why they could not hired someone to go through the most popular cell lines and create protocols. Here is the protocol I am using for BHK. Not sure if it is perfect, but it works for my needs. I optimized it using a Coulter Counter and a manual hemocytometer to compare. Within the Countess appropriate range, it seems give approximately the same count numbers.
Sorry, the image would not add so here it is typed out. Count setting both checked for Auto FL Threshold and Auto Lighting Size Gating = 12 - 28 Contrast Gating = 0 - 255 Roundness Gating = 0 - 75 Let me know how it works for you. Good luck.
I was not familiar with Fehling's reagent. I looked it up and do appear to be similar. Fehling's reagent contains a strong base; whereas, Barfoed's contains acetic acid. From what I read, with Barfoed's test, different carbohydrates react at different rates. As an example monosaccharides react quickly but disaccharides react more slowly. As a result you can more easily distinguish mono- vs di- saccharides. What has been your experience with Fehling's reagent?
The majority of preclinical testing is performed on cell lines. To create a cell line students learn to extract tissue and disaggregate (break it down into individual cells). In addition, if you have a cancer diagnosis, you might have a biopsy taken to analysis the disease. Cell lines can be made from your cancer tissue and oncologists can test out different chemotherapeutic drugs on the cells in the lab. This way they can eliminate the drugs that will not work on your cells and they can focus on the best treatment for you before the cancer has a chance to spread. I hope this helps explain the importance of learning this technique.
Thanks Prof! I know how black holes work and exothermic combustion, but I have to skip the math of it all, and I come away feeling like I never really learn the intuition sometimes, or without months or years of repeated study instead of taking no time. A review was just what I needed and I'll continue through your courses and make notes so that I can come out on top 😊
You would have first of all egg punching with the help of egg punching machine then with the help of forcep first remove the punched egg shell,then remove the membrane and then with the help of thin pointed forcep remove the embryo it will be easily removed. Then put it in the petridish its head will be separated.
I have never heard of an Egg Punching Machine. How do you maintain sterility with this device? Removing the embryo directly with forceps can be a challenge, as the chorionic membrane and the yolk sac impede this. Finally, you state that the head will already be separated. What do you mean by this? I do not believe that any device can do this for you, as the embryo is floating inside the egg and be positioned in any orientation. What is your past experience with Primary Culture?
You are correct. That is why I have another video featuring the Bradford assay. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ool9Vair-O0.html We usually start of with first semester students using the Biuret assay, then switch to the Bradford when they gain more experience in second semester.
Hello! I have two questions Can I omit trypan blue when using a cell counter? And is the dilution factor of trypan blue automatically multiplied by the cell counter? Thank you so much
I suppose you count not add trypan blue. In this case you would only get the total number of cells and would not know the division better live an dead. The Countess does all the calculations for you, including multiplying by 2 to account for the 1/2 dilution. I think there is a feature to disable the x2 function. The screen will read "Trypan Blue Corrected" if it has x2. Alternatively, you can just divide by 2 to get the cell concentration without trypan blue. Hope this helps.
Unfortunately, I do no have this knowledge or skill. The brain from the chicken embryo is very small and jelly like. I am not sure if isolating the hypothalamus would even be possible at this stage of development.
what if I'm trying to measure the efficacy of a protease at varying pH levels. I'm conducting a biuret test for each condition, but what wavelength should I pick to measure the solution? Online many things indicate 540nm, why is this? Is it because it is most contrasting to purple ?
Hi Fabian. When using a Spectrophotometer you want to always set the wavelength to the one of maximal absorbance (Amax or λmax). This will provide you with the largest dynamic range between max and min absorbance. This will ensure the data you are collecting has the best resolution. To determine the Amax, create an Absorption Spectrum using a positive control. This value can usually be found online; however, I always determine it during an experiment to double check. The Genesys 30 Spectrophotometer can perform this automatically in just a few minutes. I hope this answers your question and sends you on the right path.
Hi Jose. There is a lab manual that contains these protocol; however, it is published by my College. I do not believe I can just send you a PDF version of it. I am very clear in the videos about the protocol and would be happy to answer any questions you might have, if you try to create your own protocol while watching the videos. Sorry I cannot be more help.
Good afternoon professor, Thank you for the video. I just want to ask aren,t we suppose to Blank eachtime before we record %T for every standard and unknown using live display mode?