Had same issue on the left framebolt, almost destroyd the new bolt and i used blue loctite to be safe. 70 nm torque.

Flash is the way on this CP2 engine. You are going to pay more for less gain with these ftecu. If a reputable dyno guy has a solid built flash for the CP2 (2wheeldynoworks) ypu cant beat it

Never gapped rings 😅

I think the fun part starts after the sniff from the gas tank😂

does it come stock on 18 or 20 piston offset?

I researched this bike as a light urban runabout, but had to rule it out. The battery is hidden under a shrouded gas tank instead of it being conveniently under the seat. The shrouded design severely cuts into gas capacity. The CB500F has more conventional battery access and a surprisingly large gas tank capacity.

first track day i realized how bad the stock brakes are. felt like a sponge after a couple laps

Great bike! I have 2 of them, a silver one that I crashed into a guard rail and the black one I replaced it with. I have 765RS complete power pack, engine, wiring harness, tft screen, computer, all sensors for sale if anyone is interested. I will make you a good deal. Turn your 675 into a 765RS

Carried out this mod with the Motion Pro 01-1303 throttle tube, that has reduced throttle angle to about 60-70 degrees. Great mod makes blipping on the downshift a breeze. Small screwdriver under grip and some WD40 working round with the screwdriver had the std grip off easy with no damage. Cleaned up in washing up bowl and dried and pushed on the the new twist grip tube no problem without any other glue, hairspray or alcohol. Usefull video.

82 pounds for that bracket what a bunch of con men

I have cb300r for 5 years already. Bought it new in 2019. It's a great little bike with great looks. Amazing for zipping in town. Okay for occasional longer trips. I want to go bigger - Rebel 1100, but it looks like I wil not sell CB300r, will keep it, as it is so great in town rides and looks great.

Great starter bike for the price, allot of misleading info here and allot not mentioned.

Are you having any issues with the suspension?

You shall be known as, Mr Bikelsworth

Nice video man, just got the mt 10 recently and had zero regrets... every time I hear it scream its definitely worth it

A lot of things here apply to the MT09 as well

Probably want a better place to put the ground wire than on a bushing

Hello, I just got my motorcycle license now and I'm very undecided about which motorcycle to buy, any recommendations? I like nakeds

I was going between the K7 and the X4 insta 360. I choose this right now due to the fact it’s always powered by the motorcycle, always on when the bikes on, always with the bike and rewrites automatically over the oldest footage. I got this K7 with safety and legality in mind first and like you said I’ll get the X4 later for content creation. Ride on! 😎🤘

I got got the K7!

Can you please tell me which screws are removed to put the belly pan ? I removed one that seemed the correct given the pan shape and oils leaked out of it

This bike is best described as beginner friendly, forgiving throttle, the indicators and not much going on with the dash... perfect for beginners

Put the bike in mode 1 so much more power.

If the wheel comes upeasier then it has to be accelerating faster by proxy ya goober

The most important thing you didn’t mentioned is the brembo m50

I have the ridetech lcd flip but i really dislike the quality, from a slighy angle it looks purple with green rather than black with white. Im considering going back to original

Funny intro ..

450 for two wires hahahaha insane bro

Hey bud. When I done the throttle I can’t seem to get enough play too where it doesn’t stick? when turning the bars. Any idea?

"I don't need to be excited about this bike. Because, look at it's competitor...overpriced." What are you talking about. How does one thought relate to the other? 1:30

во дела, а я думаю, чё такой акцент знакомый:)

I got my son's with 2300 miles on it. $4k Not a bad first bike.

I say if you can't have fun on a 300 you best stay off a 1000

Greetings from Ireland 🇮🇪great review. I’m late to biking just want something that looks well & a bit of fun. Not sure to go for 300 or 650 😅

We have it around $8000-$8500 USD converted.

Came here from Ryan's video

Front brakes are there for a good reason. Rather than tell new riders not to use the front brake they need to learn and practice the proper front brake techniques. It may save their life someday to use the front brake while simultaneously applying the rear brake correctly.

First bike was piaggio zip then honda pcx and then am mt07

Which one do you recommend? Yamaha r3 or Kawasaki ninja

Absolutely love the opener windowshot

Who raised this man?

Not true about needing aftermarket exhaust. Stock is better because of some back pressure. Did you re use head bolts? They are 1 time use only. And what happened to running in piston and cylinder? 500 miles

Horrible misinformation

Can remove the return cable . And fit a Motocross throttle . That's a good idea

You wouldnt put an aftermarket exhaust on your lawn mower. Yes. Yes I would.

I just have to ask 2 years later how did that big bore kit hold up? Was it worth it? And how was longevity?

I've just installed an rcs17cc on my Tuono v4, and the setup I prefer is: R mode with 20mm offset. The brakes are now as good as my BMW.

getting your bike windshield cleaned is a flex fasho...

QQ where did you buy the cellphone holder