FIRST of all, if other devices ARE connected to your WI-FI, you DO NOT need to restart your router!! Secondly, don't tell people to unplug or turn off the router for only 2-3 seconds!! If you're going to unplug it or turn it off, leave it off for at least 20 seconds! AMATEUR!!!
@@JereB698 They wouldn't stop it from being restarted. I said if all other devices ARE connecting and working, there is NO NEED in re-starting the router. And it is normally customary to power a router of modem off for a minimum of 20 seconds.
A Rich connection can be hard to troubleshoot, but if it is only on Bank-1, it is something that would not affect the whole engine. I would remove the spark plugs one at a time on Bank-1 match them to a spark plug burn chart and find which cylinder is running rich then test the components on that cylinder.
Wow thank you this worked had this problem in my 2004 Acura task for months no radio unplugged radios, battery etc nothing then I did this thanks again
I have Optimum 1000/50 and when uploading large files the internet crashes from Bufferbloat. I solved this by setting upload to 35 instead of 50 and went from D to A on the buffer bloat test and more importantly no more crashes The issue is it killed my download to 40%. On wired and close-range devices this is not an issue as 400 is fine but some areas of my house's wireless mesh network are really slow now. I am told that it is normal when using QOS so I was advised to use SQM so here I am trying to learn how to add Merlin. I have done firmware mods to my older router years ago so this is not totally new to me.
wtHell is going on?? Mine says it updates every day, but there was one update it added. I have gone thru all the steps, including several times checking connection - all green check every time, and checking internet connection - it is good and working. BUT THIS DAMN TV ISN'T WORKING.
Mine isn’t working either… I tried all you suggested and I’ve even tried a factory restore. I see other people having issues today too though, I wonder what is going on?
hey sir , i know that your video its too old but i like it , the only problem was that i couldn find the right file for my AWUS036H in your link. bc it dosent say RLT8187. THANK God i wached your video years ago and i saved those files in my old hard disk, and i could make it works.
So, in my 2000 accord, I pushed random buttons until it displayed “code e”. then i finally read the manual, and followed the instructions but i’d already reached 10 attempts. i drove around for 2 hours waiting to see if there’d be any change, disconnected and reconnected the power, and then i left it running in the auxiliary mode (like the manual says) till my battery died. Hours later when i was able to jump it, it still displayed “code e”. I found the original card with the code that came with the car, but idk wtf to do. should i put it in rice?
My Roku remote works perfectly; however the hisense remote is not working so I can't watch regular stations or turn TV on or off. Help? Has fresh batteries.
I reset my Audio and it’s not put the volume up on several channels? Just bought this TV and on CBS when I looking at the football game commentor or speaking Spanish
This doesn't work on Crosstour nor do this video give instructions on how to clear ErrE. Car needs to be running for up to an hour to clear the ErrE so that you can then enter the radio code.
Can you have more than one client active at the same time in case one server goes down or becomes unresponsive? Does the VPN provider frown on that? For example, 2 clients vs 20 clients at the same time?
No luck yet here. Nav says please check the disk and the radio still says "erre" and I have never entered the wrong code and the right code isn't working. Last time we changed the battery the code worked and radio worked even though the navigation didn't work but now this time after the dead battery the code worked once and then the radio stopped working after a few minutes and then I have had this problem ever since and it's been a while now and I've tried every trick I could find and I know I have the correct code but it doesn't matter I'm ready to scream lol any ideas would be appreciated thanks
The Roku is trying to update by connecting to the Roku server but cannot connect for some reason. Here is a link to the issue www.wirelesshack.org/roku-error-code-003-causes-and-fixes.html
